Liczymy pasujące modele…
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…
A set of 4 pick shapes - Standard 351 guitar pick, Jazz pick and, Triforce pick and the Sharkfin pick. All come in smooth version and version with a grip. Print flat on the print bed. Check the full article about 3D printed guitar picks:…
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Dimensions (LxWxH) 132 x 150 x 32mm (100% scale) Basic information The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves…
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
This articulated axolotl is a remix changing the head in order to make it more round and less edgy. I additionally fixed a part o the 3D model where a link was slightly fused together. Features Looking cute Easy to print (pre-supported…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Probably the most popular filament sample on Printables comes with a set of storage boxes in various sizes, 100% printable! I designed the box so that you don't need any additional parts, no screws, no magnets. There are two different…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
--- Disclaimer: All project-related editorial content, including photos, text, videos, and other media, is protected by copyright. It cannot be used or shared without prior permission. The Creative Commons license does not apply to this…
FYI if you scale the model down it will not fit together Collection of Interlocking fidget toys, Square, Cone, Hourglass, Ball I like to print PT1 in matte and PT2 in silk, it really makes it looks great!
In the Files tab use "Ctrl F" to find the files you need. My takes on the creatures from the D&D Monster Manual are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the…
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
In the Files tab use "Ctrl F" to find the files you need. My takes on the creatures from Monsters of the Multiverse are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the…
Drill Dust Collector V3 - Modular 3D Design I'm thrilled to introduce the Drill Dust Collector V3. This tool, entirely designed and 3D-printed, features a 3-in-1 modular design and an eye-catching two-tone aesthetic for superior…
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
Check latest version1.0! : https://www.printables.com/model/1006007-dummy-13-head-collection-version-10 This head part is designed to seamlessly integrate with Dummy 13's body design. You can choose from 7 variations: Head_A to Head_G.…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Thanks Hello! I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted. It doesn't need supports! =) Hi again! I…
Want the same results? Click here to find the filament I use for results like these. This super satisfying fidget can be customized to be any shape or size with the simple adjustment of a number! I have added 9 sizes that are ready for…
katana s desingem Naruto
Some of these are remixs of creative commons attribution files found years ago: - Ape https://www.thingiverse.com/thing:182151 - Black Bear https://www.thingiverse.com/thing:182072 - Bat https://www.thingiverse.com/thing:850829 - Blink…
This is a collection of tool holders, where the focus lies on quick access. Almost all prints can be printed without supports. I will add more tool mounts in the future and update them here. Latest Update: 10.08.21 A few models are…
Author: CreativeTools 3DBenchy is a 3D model specifically designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for free, make and share. http://www.3dbenchy.com/ Print instructions…
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
This is a 7-pack of head parts designed for Dummy 13 version 1.0 Due to design changes in the frame parts, the head part of Dummy 13 beta version is not compatible with the head part of version 1.0. Update: [28/09/2024] I have uploaded a…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Dimensions (LxWxH) 170 x 96 x 65mm (100% scale) Basic information After multiple requests, I've decided to revisit my previously uploaded Orca design, and articulate it. Unfortunately Mattes beat me to it, and has already uploaded an Orca…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
Download below the entire cute kitty collection available for free for everyone! The collection contains 3 styled kittens with their own Halloween inspired counterparts - Vamp cat, Mummy kitty & Witch kitten. Complete with Bambu studio…
This is a Remix of the awesome Samurai Mask Model 3 by flioink. I split the tooths and fangs so they can be printed in different colors on a regular printer. Just cut the imperfections with a knife on the teeth and mask to prevent a gap…
Tested in PETG, recommended to print in PETG
Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
Źródło oznaczyło ten model jako treść 18+.
This is a collection of tool holders for the Gridfinity system (42mm grid). All holders have the same height: 32 mm. The holders are designed to be put into a 7cm high drawer . Space saving was a priority : The tools are put into the…
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Collection of hooks for IKEA SKADIS board - slightly reinforced thickness and tight fit. Hooks from 15 to 65mm Kolekce háčků pro IKEA SKADIS desku - lehce zesílené a pevně padnoucí. Háčky délky 15-65 mm Print instructions No supports…
Extra strong wall hook collection - 6 variations + STEP file
je potřeba prolomit první vrstvu u čepele
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Bonjour, Voici une épée dépliable, un projet qui m'a beaucoup amusé ! ATTENTION : Vous ne pouvez pas vendre ni le modèle imprimé ni les fichiers numériques ! Pour une licence commerciale merci de me contacter par mail à…
This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
These are a great example of "Print-In-Place" 3D printing, there is no assembly and these utensils are ready to use right from the print bed. Previously I had made the Tanto and the Trainer blades, but knew in the back of my head that…
This is a stylish hex pattern design handle that is compatible with M3, M4 and M5 bolts, and comes in 6 designs for each. The M3 version of the handle has the perfect width for 1515 extrusion, while the M4 version is ideal for 2020…
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
The Mandalorian Darksaber model designed by Polymath314 is gorgeous and I wanted to print it with the right color filaments to avoid painting anything so I split it up. The biggest challenge was splitting up the vertical stripes to still…
This Drill Dust Collector sucks to the wall and removes the dust when connected to a dust extractor. It has a 35mm diameter hose size, which should accommodate most workshop vacuums ( I am unsure about home vacuums ). Can drill holes up…
This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Cyclone dust collector. Can be printed in two parts on the Prusa Mini! Bouth parts have a rim to be fitted together neatly. PrusaSlicer Files have all the necessary supports!
PROJECT HISTORY Edit 20.4.2023: HUGE UPDATE I completely remade my parametric model that helps me generate pulleys more easily. As a result: I reuploaded all files with cleaner .stl files. Now smaller pulleys available - some have very…
The following sizes are currently available for download: Width Height 3 2, 3 5 2, 4 7 4, 5, 6 9 5, 6 I recommend to fill the bottom with plaster, which makes it much more stable (that's why there is a hole 😉. And some small rubber feet…
Cyclone dust collector for a 2.5" hose. Made to be as large as could be on a Prusa i3 mk3s. I used m3 hardware to put the top and bottom together but glue would work just as well. ¼-20's for attachment to the bucket. I put this on top of…
Unlock your storage potential with Gridfinity Bins! Make your own custom Bin with this Solid Base Model With a range of sizes and heights available, from 1x1 up to 5x5, in 9 different heights, you're sure to find the perfect bin for your…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
UPDATE: For even more flower and planter options see the updated release: https://www.printables.com/model/1100526-springy-flower-collection-update This is a springy flower collection. My wife liked my springy flower I previously posted…
Intro I was looking for a flexi-cat for giving it as a present to a cat lover, and I could not find a single-color one, so I took the Mult-color Flexi Cat by K7ZPj and adapted it to be printed using my Prusa Mini+. The original author is…
I printed these ducks with no supports, 0% infill, back seams, and 6 bottom layers (so they stay upright while floating). Check out my duck page for all my ducks! www.karenchaudesigns.com/ducks Support my projects Follow me & like this…
This innovative dust collector is designed to optimize your drilling work. The model natively supports 27-28mm mineral water bottle mouths and includes an adapter, making it compatible with Coca-Cola, Sprite, and other standard beverage…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop All my most popular xmas trees in one place! Small updates where needed. Scale to desired size! Merry Christmas!!
Print with 3-4 perimeters from PLA or PETG. Scale to any size! To learn how to design these yourself, watch the tutorial .
Clean up your 3D printer workspace with this handy poop bin designed specifically for the Flashforge AD5X. This simple tray catches filament scraps and purge lines to keep your print area tidy. just print and place it underneath your…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…
Print: On the side
Column| Apple Watch Charger Stand A charging stand defined by a stable column structure , balancing geometric clarity with refined surface detail . The open-column profile reveals a dialogue between structure and void, allowing the Apple…
Improved version - combination of 2 models Better locking mechanism to secure the wires larger adhesive area for double sided tape combination of following models:…
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
My takes on the Characters, NPCs and Creatures of Curse of Strahd are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
A playful extraterrestrial take on the classic “See No Evil, Hear No Evil, Speak No Evil” concept. This collection features three stylized gray alien figurines sitting in the iconic poses — covering the eyes, ears, and mouth. The figures…
Army Men Collection Fixed floating feet on one soldier (1.28.2026)
A collection of all the modular lightsaber parts from my first five build your own lightsaber models including parts from Obi-Wan Kenobi's, Qui-Gon Jinn's, and Luke Skywalker's V2 Lightsabers along with parts from three custom sabers and…
Collapsing Jian This is a collapsing Jian, which is a type of Chinese sword. It's a "Print in Place" design that is only 200mm tall when printed but extends to over 800mm long The Replaceable Blade Version is available to my Clubs…
change the color of the filament at 5 mm to accentuate the inlay. check out my other christmas designs: SNOWFLAKE ORNAMENTS MERRY CHRISTMAS FRÖHLICHE WEIHNACHTEN COLLECTION GNOME ORNAMENTS 2 GNOME DEER
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Improved version Better locking mechanism to secure the wires Want to have a commercial licence on this model? → Join the CLUB :)
I created this model of a Border Collie with recap 360. Color image is the original dog. 29-4-2016: Updated the model after fixing it with Make Printable Instructions Sliced with Cura layer height 0.2mm shell/top/bottom 0.8mm fill 10%…
Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…
Hi All! I discover that you very like my Bridgestone Potenza 6 style phone holder, so I designed also that Rest of models you can find on my profile:
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/161705#profileId-182405 Collection of brackets and braces of different sizes and types. NON-COUNTERSUNK version here:…
https://www.thingiverse.com/thing:962416
Collection of Gridfinity basic cups height 6 (46mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
