Liczymy pasujące modele…
UPDATE: For your convenience I have now added pre-coloured .3mf files at a whopping 520% scale, you'll need to add supports yourself and you can down-scale in slicer if you wish. 😁 ( I have not included the Base ). This was done for the…
Scaled to x=105%, y=105%, z=90% - see the files for more print settings. Printed the blade first, then the handle. Added a pause right before the base of the hilt (top of the print) was covered up and carefully dropped it in. Be quick…
A multicoloured logo to put on your wall, about 10cm across, it takes about 2 hours to print. feel free to remix into a keychain or whatever you like. i like eggos. Print instructions Category: Signs & Logos
A 3D TWITCH logo that can be printed in multiple parts and colours then snap fit together. No MMU required. Great for a stream background or desk accessory etc.
Fortunately there is just over 10mm of space in front of the LEDs on the hotend, more than enough space to slide in something to add a bit of colour. Printed with settings leaning towards this , though not as critical to get it all the…
A simple rose that is easy to print. The Print uses about 8 grams of filament. I have created a few different version to allow for different ways of producing a multi colour printing. Rose Multiple Height This model has the rose part…
This model was originally posted on thingiverse: https://www.thingiverse.com/thing:676267 So all credit to them, I just split it apart so I could print the head and tongue in different colours or at a bigger scale.
coloured and separated into 3 build plates. when built a little glue is needed to assemble. everything should fit together in joints! layer height 0.1 mm wall loops 2 build density 20% seam position nearest no supports
Auto tree supports used. Original description from Printables is “Christmas ornament by Vlado Turek ”
An Overwatch Logo, optimized for 3d printing, approx. 7cm in diameter (scale to your liking). Single Colour version also available, if, you know, you want to paint it yourself. :) Print instructions Category: Signs & Logos How I Designed…
UPDATE V2 I found the original version made the whole thing sit too wide. This would often get caught on the internal ‘fins’ of the original Bambu Lab AMS unit (Hydra likely ok) and would catch. Meaning it would sometimes not roll…
This is a simple 3-4 colour multi print. Use higher bottom and top shell (4 or more) count at .2mm layer height and 15% infill for fast and impressive results. The boats aren't separated very well and I will update a better version soon.…
If you try to slice the .3mf, it takes a lot more time and filament, so here is the .stl as one model
this file was made by @Tyler_311647 and I decided to share my colored version so you don't have to put the time and effort into it again, hope you enjoy ;) If you found this useful, please donate what you think it is worth to my PayPal.…
Coloured for the Bambu with 3 colours. Remix of Josef Prusa's model.
Wheels with two coloured parts. No need glue.
Coloured for the Bambu in 4 colours. Supports use are the auto tree supports. Original description from Printables is “Christmas ornament by Vlado Turek ”
Remix from the brilliant: F*cks to give business card I edited the geometry a bit to be able to switch to a different colour on the heightened letters and card's border. Adds a bit of contrast.
Add your text in, then print with up to 3 colours. This was made for a large boi. Scale down if required. Printed with: LH = 0.2mm Top & Bottom Layers = 3 Walls = 3 Arachne mode on For colour changes, add pauses in at Z layer = 1.20mm (6)…
[EN] Simple three-colour heart-shaped pendant. The pendant is adapted for multi-colour printing in layers using the M600 command (or simple manual filament change). The ideal layer height for printing is 0.25mm (then exactly 2 layers per…
2 sizes of fillet gauges modified to be printed in colour on a BambuLab AMS.
The flimpsy operating buttons in black did not make a good aspect to me. Put some color over them. Not much to add to the photographs. I used the oval knobs. Then you have to push. The round ones work too, but when you touch them to top…
Use standard Prusa slicing.
I love the City Streets projects and since I own the XL, I want to print it the pieces as one object with multiple parts. So I split the complete objects to parts and coloured them. I figured I might as well post this as a remix, to save…
Single color medals Universal medals for any game. If you want to print medals on a printer other than G-Code ready and you don't know how to edit G-Code, you can print your medals too! The only difference will be that they will be one…
Multi Coloured Owl Lamp for Neo Pixel Lights Cool multicoloured owl lamp. From the original design I added some screws and bolts to they eye pupils to attach a neo pixel ring, and put a hole in the but to feed a usb cable through. I am…
All your solid colours are simply too bold for your delicate project? You are in need for elegance and sophistication without loosing the variety of your colour palette? With the translucent coloured beads, you may use all your colours…
So this is a remix. and you can now use any filament for this the original needs transparent filament
Modified for Oral-B iO Model with option for coloured caps
Print this with the numbers facing the build platform.
Took the silhouette from https://www.printables.com/model/407014-cherry-blossom-wall-art and added the center of the flower from https://www.printables.com/model/406111-sakura-cherry-blossom-chopstick-stand I painted the petals sakura…
We have designed two train models in a Christmas bauble for railway fans of all ages. An express train (inspired by the German ICE) and a classic steam locomotive. Both can be printed with a normal single extruder printer. I printed a…
coloured version
I painted this model in Prusa slicer . Printed on the Prusa Mk4s with Mmu3. Lane 1 — Skin colour Lane 2 — Black Lane 3 — White Lane 4 — Pink Lane 5 — Brown All PLA PS. I used a 0.4 HF Nozzle
I have coloured it with PrusaSlicer for the MMU3
Coloured keycap for round keyhandle, diameter 24mm. An upright print is recommended for best results.
Multi-coloured medals without MMU! Universal medals for any game. To print a single color medal, click here . THE FIRST COLOUR THAT STARTS THE PRINT IS THE COLOUR THAT MAKES THE FONT Here are the game medals with colourful text inside.…
Jednoducý přehledný držák barevných fixů Mala od Ikea. Je to přehledné a předevší je to vždy uklizené.
This 6 nimmt! Card Box with multicoloured logo is based on the UNO Card Box by Markus_p . I have included the bottom, inner card holder, and latch in case the original changes them, but they are as of the time of this upload unchanged…
To be able to easily identify the right key for the various locks, I have printed this keycap in different colours. The key is placed in the outer shell and the inner shell is pressed into the outer shell. BTW The keys are from the danish…
Note that the photo is of a scaled down model after I accidentally broke off the handle. Big box in the model preview is just the modifier box and will not be printed.
I really loved this model but there are a 90 degree overhangs which cause extrusion into mid air in both the body and the head. Although these overhangs are internal to the model they make a bit of a mess that needs cleaning up post…
This is a simple standard model of a dice where one STL file represents the dice body and the other represents the dots. Instructions Download both STL files. In ReplicatorG press Ctrl-D Browse to each STL file Define the destination of…
This is a Tinkercad remix of Soozafone’s "Dummy 13" articulated figure, designed to allow independent ankle coloring without requiring an AMS unit . This remix includes a modified shin piece and a new ankle attachment , both carefully…
Needs Supports Multi Colour picture coming soon
A vibrant multicoloured butterfly design with a built-in 6 mm diameter hole for fitting a small round magnet. Perfect for fridge magnet decorations and also suitable for making custom hair clips by attaching a clip on the back.…
Quick and dirty modification of the excellent Pikachu Bookmark by Kim Holse. Based on the "non-crease" version of the original. Changes made: Closed all holes in the top part of the model to provide surfaces to colour Added grooves for a…
etwas mehr Farbe für Eure Stealth Press 1S / Legacy Modelle =) Ich habe den Griff vom Top Teil separiert und Bohrungen für Gewindeeinsätze hinzugefügt. Es gibt 2 Varianten: 1x mit Durchgangsbohrungen zur "einfachen" mit einem langen…
This is an AI generated image, converted to a curved Lithophane. Best printed in White, vertically. There is a file (in the photo section), that contains a slightly washed out picture. Print this, using a program such as GIMP, in…
Featuring the 5 main logos in starwars Galactic Empire, Jedi, Mudhorn, Mythosaur, Rebal Alliance. this coasterset is sure to get you what you need. this is optimised for multi couler printing like bamboo. these coasters end up flat so…
I added inner sleeves to all my cards (specifically these ones ) and needed a good way to store and carry them. I tried the inserts for the original box but the sleeves added too much bulk. This is a remix of two models. I loved the…
A multiple use layed arrow. I created this my son's busyboard. I printed mine in black / white at 0.2mm on my Ender 3 pro.
I wanted to print some multicolored prints but wasn't sure how. After doing some looking around on the web I found a filament joiner on thingiverse. It used a milled aluminum block and a resistor cemented into a hole using heat resistant…
A snowflake with a natural pattern in two colours
Multi Coloured Yamaha Logo Coaster, designed for a multi coloured printers like bamboo
for English see below Meine MMU3 for MK4 ist gestern gekommen. Noch habe ich keine Erfahrung damit. Allerdings habe ich mehrfarbige Beschriftungen bisher durch eine Intarsienarbeit realisiert. Da ich mir vorstellen kann, dass euch das…
For this one i try to take two diffrent PLA colours.
This is a multi coloured modled batman coaster, nothing else needed but the multi coloured printer
On my journey of turning perfect, new, pristine rolls of filament into completely useless landfill, I came up with this design. Although it didn't make me millions on Etsy, it did make a few of my friends football mad kids happy. What…
Recently watched a video where each person pieces were scrambled and upside down. You initially play each tile position the same but after moving you flip it over and play it however that piece normally plays. 0.2mm normal settings
Multi Coloured Captain America Shield Coaster, designed for multi coloured printers, bambu labs. nothing extra required but the multi coloured printer
The Multicoloured Christmas Bookmark is designed so that you can print it in two different colours with a single extruder printer. No supports needed I printed with 20% infill but shouldn't make a difference if you used less. I have…
Multi Coloured Yamaha MT logo Coaster flat useable, designed for multi coloured print like bamboo
Huntrix coloured Lightbox singer group band Kpop demon hunters
arsenal stadium wall plaque with separate printed ( filament colour changes required )badge glued into place start with red pause at 4 change filament to white pause at 6 change filament to blue pause at 10 change to gold for main plaque…
sea harrier silhouette
Hdb coloured hdb block rochor
Thanks to PanicSphere for the Mahjong dice model. I've remixed it to add inserts in a different colour. The inserts are delicate - they should fit snugly. Use a TINY drop of superglue if they're loose. I used PLA - black with white and…
The SubZero mixer boards SZ-Mix04 to 08 have great quality on minimal space - but sometimes when you're not a professional or you are in hurry, you won't find the right knob to bypass the important channel on the mixing console - or, even…
I painted this model in Prusa slicer . Printed on the Prusa Mk4s with Mmu3. Lane 1 — Skin colour Lane 2 — Black Lane 3 — White Lane 4 — Pink Lane 5 — Brown All PLA PS. I used a 0.4 HF Nozzle
A 3D TWITCH logo that can be printed in multiple parts and colours then snap fit together. No MMU required. Great for a stream background or desk accessory etc.
Coloured for the Bambu in 4 colours. Supports use are the auto tree supports. Original description from Printables is “Christmas ornament by Vlado Turek ”
It's amazing what you can realise with the right settings in the PRUSA Slicer. For Christmas, I designed wafer-thin angel wings with the star infill. These are suitable for the angel Angela in 50 mm height…
Both the Satisfactory Tractor and drone come with coloured and non-coloured instructions and 3MF files to make it easier to plan if you want a coloured one and how hard it would be to put together, More printable Satisfactory models…
I wanted some simple coloured beer lines, These would be a tight sliding fit over the different size beer line I use, so that they do not slide back and forth under gravity. This is simple to achieve using the modern slicers, where you…
Simple bi-material rings, made using wood PLA and another coloured filament. Scale X and Y according to your finger size. Each part has to be printed on top of the previous one, or glued afterward. On the full modeln, insert filament…
This logo has 6 colours Black, White, Light blue, Blue, Red and yellow and due to the way its designed can only be printed on systems with at least 6 colours. Print with a 0.4mm nozzle, layer height can be draft and add ironing top layers…
A festive flexy rexy now ready to multi-material print. See my previous remix for the single-colour version. This model has some very small supports under the tail for reliable printing that are easily snipped or snapped off. Original…
50mm rount screw lid container, punisher logo on the lid. ready to print
Protect your surfaces in style with these bold 3D printed Ford Mustang coasters. Designed for car enthusiasts, each coaster features a crisp white Mustang logo printed on a sleek black base for a clean, high-contrast finish that stands…
Snap on coloured ring base for miniatures with a 28mm diameter. I used them specifically for the 5th and 6th player colours in Clank! Adventuring Party. 0.1mm layer height 2 walls 5 top 3 bottom 100% infill Print by object (saves filament…
Designed this in one of my first weeks with fusion. Stop it at certain layers to change the colors :D
Busted a knob on my 65 Fender twin reverb Decided it could go to 11 for the heck of it. (ya I know, corny and lame) Uses a 3mm x 4 to 5 mm long set screw Multi colour (single extruder) .4 nozzle .1 resolution
Why this? Following my project of producing 2d images in colour I am turning my attention to printing 3d coloured objects with an MMU2S. This model is a “proof of concept” to demonstrate the possibilities using the palette available using…
I didn't really modified the model, other than re-combining and resizing. This is the bambu-slicer settings to colourize the model and make it into a pencil topper. The club-patch on the hat is a separate body in the slicer, and so can be…
This UNO Card Box with multicoloured logo is based on the UNO Card Box by Markus_p , similar to this model but with a white outline as well because I wanted the box in black. I have included the bottom, inner card holder, and latch in…
This UNO Card Box with multicoloured logo is based on the UNO Card Box by Markus_p . This edition comes with 112 cards printed on slightly thicker material than the original, as such I needed to make the bottom case and inner card holder…
![[V4: FULL RELEASE:] Dummy 13 coloured ankles: AMS-free](https://media.printables.com/media/prints/1222351/images/9166691_7b6b9354-4811-4d98-a3e2-8539526248dc_84c555bc-f4f9-4e46-afc2-7f2dc204688e/screenshot-2025-03-09-at-31357-pm.png)
