Liczymy pasujące modele…
Wile E. Coyote, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is a cunning, devious and constantly hungry coyote repeatedly attempting to catch the Road Runner. Instead of…
You can easily scale the print file, but make sure that the height remains at 3mm. There are two bed in the project - right/left corner version. The bed names is right accoding the final print model's placement (mirrored to give the model…
A splattered Wile-E Coyote
Wile-E Coyote Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Wile E. Coyote and the Road Runner
Hang around problem areas to help deter wasps, I plan to use a command strip on the back and stick it to the eave of my home.
A nice mini version of my splattered Wiley Coyote refrigerator magnet uses a 5x2 or 6x2mm magnet (there are two versions). Super quick and easy to print requires no supports and minimal infill. Press a mini magnet into the recess (may…
Wile E Coyote holding an umbrella Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
I left the sign empty, so that you could put a small paper or 3d print of your own in back or in the print. Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your…
The Coyote Reconnaissance Vehicle is a non-amphibious armoured reconnaissance vehicle based on the design of the LAV-25 and the MOWAG Piranha II. The Canadian Forces ordered 203 of the vehicles in 1993 to replace the Lynx reconnaissance…
In urban areas where pigeon overpopulation poses a growing concern, artificial or decoy eggs are frequently employed as an effective and humane method to manage the population. These synthetic eggs, often crafted from sustainable…
Wile E Coyote Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Original model size (.stl) is 118 x 179 x 2,8 mm. Don't scale it down , then some walls are already thin! Making it bigger is no problem, then adjust the height back to 2.8 mm. Model's final orientation is different to placement on bed…
pocoyo i made it hollow to save filament. use supports. i fixed the empty spaces issue. Category: People
Remix Wile E. Coyote. I have combined the parts into 3MF files separated by color for easy printing
Wile E. Coyote and Road Runner Wall Art
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
TAKES SOME 1/2 IN AND 1/4 IN RODS. MAG IS RMEOVABLE. SPLIT FOR SMALLER PRINTERS. Category: Props
As the name suggests, this is a decoy controller that can be used as a prop, for cosplay, or to keep your little brother from getting a turn!
Heres a basic case I made for a cheap USBC PD Decoy Board, very cheap on Aliexpress. I'll add a pic of the one I used and also post a Aliexpress link. It supports 9, 12, 15 and 20v, although not super easy to change between as you have to…
3D scan of Dove decoy. STL is the best file, I removed the clip and softened the model, along with edited rough patches out. Zip file contains colored version. Unedited straight from the scanner. It’s a rough scan and would need more…
This is a mojo style butt up decoy. I printed it with pla 4 walls 1% infill. I plan to dril a hole in each quarter and injecting spray foam. for the bottom cavity i used sand and superglued the cap on. paint how youd like. painting mine…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Meet your new butterfly army. Print this guy out and then print some more (he'd appreciate a few friends), suspend them above your precious vegetables and they will protect them from the scourge of the evil caterpillar horde. Learn about…
Fake smoke detected for use in hiding something installed on your ceiling that you would rather not explain to people if they see it. The base plate attaches to the ceiling. The detector attaches to the base plate with a slight turn to…
EDIT: Added V1.2 which has a more realistic look and the ability to stack Keep your important items hidden from plain sight with these SODA CAN shaped stash boxes! Two sizes included: Standard size can, and Arizona size can Separate…
This is a color 3D scan (Artec Eva) of a vintage duck decoy, the original file was downloaded here: http://viewshape.com/shapes/fj5twzpz8m6 #. The PLY model with color information is in the zip file, I converted it to an STL file that I…
Description: This coyote statue captures the clever and adaptable nature of one of North America’s most recognizable animals. The sculpt balances realism with rounded features that print cleanly at small scales. Created for MakerWorld…
WARNING - updated d.d. Oct 18, 2023 The electronics circuit and description have been corrected after I discovered the first version was horribly wrong. My sincere apologies for any failures, if you tried it out yet. Introduction This is…
Wile E Coyote - Bugs Bunny easy to print in one color very quick and looks great
A nice splattered Wiley Coyote refrigerator magnet (uses two 10 x 3mm magnets). Quick and easy to print requires no supports and minimal infill. Press a couple of 10 x 3mm magnets into the recesses (may need glue) and he's ready for…
ssogaard 's Oil funnel remixed for 2011-2014 F150 5.0. Funnel is keyed to match oil cap.
Nina personaje de la serie de pocoyo se recomienda imprimir en altura de capara de 0.2 y soportes en rama
This 3D model captures a classic cartoon moment – the ever-unlucky Coyote caught mid-mishap while the speedy Road Runner escapes. Designed to be mounted next to a light switch or electrical outlet, it adds a humorous and nostalgic touch…
drukować w skali 1000%
Coyote Starrk Necklace for cosplay.
Transform your workspace into an animated wonderland with this incredible 3D printable STL model that captures every detail of the iconic cartoon coyote! This stunning figurine showcases the character in a classic pose, holding a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print in PETG. the car can get too hot for PLA. 20% in fill
I used these decoy boards:…
Printed a Roadrunner by the past, I wanted a funny coyote version. Perfect decoration for kitchen door. Thickness of the model is at 3mm. I recommend to keep a minimum of 3 or add double tape to fix it. Can be rescaled as you want.
High detail cranium and mandible that I segmented from the high resolution computed tomography scan of a coyote ( Canis latrans ) (CT source:…
This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…
Der Coyote passend zum Roadrunner, er wird ihn niemals einholen. Bitte im Slicer schneiden. Passt leider nicht auf alle Speichen. https://www.printables.com/model/1387367-roadrunner Viel Spaß beim Basteln PS: ich will eure Makes
Looking for a clean, adjustable, and fully compatible battery tray solution for your Axial SCX10 III Coyote ? This tray is a drop-in alternative to the original Axial AXI-2999 battery tray , offering flexibility without compromises. Key…
Decoy Tray-packing puzzle by Stewart Coffin (STC #187-A) Pack six pieces into an obstructed tray. Decoy is a tray-packing puzzle that looks simple, yet is anything but. You will need to find some tricky movements in order to get all the…
10/15/24 v2 Update Holes on top and bottom increases by .2mm (to 4.2mm and 8.2mm) The 4mm and 8mm holes were too snug, especially when removing the wing from the decoy. I broke a printed mount as it was a little snug when taking it of the…
The Coyote: designed for hunters by hunters. The Coyote was built for the field, not the bench. Rugged, practical, and purpose-driven, it brings Evolution Moderators™ performance to hunters who need equipment that works when conditions…
This is a case for a board that negotiates for a preset voltage from a usb c power supply. It requires shrink tube or glue to be closed. The board used it in the link below:…
A Golmen from the game Clash Royale
Hello, Welcome to my profile, full of models and miniatures :-) I have Coyote from Looney Tunes for you for an exhibition or diorama. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If the…
Let’s be clear: this is not a functional safe. It’s a gloriously fake, over-engineered desktop decoy, a 3D printed prop that clicks , spins , and fools nosy co-workers . Designed for laughs, fidgeting, and deception (with just enough…
Skull from a male coyote (Canis latrans) who got hit by a car on Rt 101 in NH.
I created this to house USB-C decoys that I use to supply a specific voltage to my project. You can buy them in 9v 12v 18v and 20v. This tray fits these decoys I purchased from Amazon: https://www.amazon.com/dp/B09GVQ3FGW Note: These…
English A simple wall mount for my YT-Industries Decoy ebike charger. Model: BC222360040 Should be equivalent to the MDA254 (www.mdacharger.com). Use two 4.0 or 4.5 mm countersunk bolts for mounting. Deutsch Eine einfach Wandhalterung für…
My first OpenSCAD project. Very simple module to create an egg shape.
Wild E. Coyote - Super Genius. Two versions provided; i.e. standalone & with stand.
Pretty simple, but functional! Originally, I looked for an adapter that someone else has made. I'm very new at this printing adventure, so I took it upon myself to start my journey to create a functional part I will use. This adapter…
A wood carved eagle statue that is paintable and scalable. Modified with extra strong legs. Easy to print! Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
These purple modules https://www.amazon.co.uk/DollaTek-charge-trigger-support-voltage/dp/B0BGPH1675/ I use filament to fix it in place, just heat it up and squish it in.
Coyote Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See other Low Poly animals here: https://www.printables.com/@StudioMechanik/collections/2899611
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Karma ( Xi'an Coy Mahn ), es una superheroína de Marvel Comics , asociada con los X-Men . Creada por el escritor Chris Claremont y el artista Frank Miller , apareció por primera vez en Marvel Team-Up vol. 1 # 100, en diciembre de 1980. Es…
Support coyote mini pour Peugeot 308 T9. Facile a imprimer en une seule pièce. Je recommande le PETG.
This is a simple adapter that allows for a paint pole to be coupled to a bike hook from the local hardware store (Lowe's, Home Depot, Walmart, etc. all sell these). Decoy retrieval hooks are at least $25 from what I've seen, so I made…
Two snowflake holders for the 16" 2 and 3 prong snowflakes. I don't know if they fit the star shaped snowflakes, I don't have those. Slide in from the front, and they have a loophole to put a tie wrap in it. I used the 3M outdoor mounting…
Simple mount for the large Xicoy pump, the pump is held in place with one zip tie. I printed the mount in ASA, any material will work, no supports required. standart 2 outer walls and 15% infill on request I will hand out the step file
These small moths clip to branches or sit on flat spots as decoys to deter real moths from choosing that plant to lay eggs. There is no guarantee they will work, but at a third-of-a-penny each they probably can't hurt the plants. There…
Perfect for when you need to deny any knowledge of what you did, you can now just say "well thats an AI pic, look extra finger" simple but effective, works most of the time every time.
I created this from a coyote skull model, gemstone stls, and created a textured base in Blender. This is mostly practice for Blender. I wanted a holder for all my Pura Vida bracelets. Prints well in FDM, print flat with no supports.…
Start with grout color, then red brick, then brown for coyote.
Heres another USBC Decoy board I designed a case for, check the pictures to confirm its the same one, I have seen similar looking ones but have a slightly different layout, these may not fit the case. They are very cheap from Aliexpress…
Showcase your trophy coyote or badger skull with this unique skull display stand from Song Dawg Designs . This custom model features realistic sand dunes , coyote tracks , and a half-standing fence , simulating the rugged terrain where…
Holder for Coyote Mini design to feet with DS7 air vent.
Improved USB C PD/QC decoy board by Frank.
For me the stripped down electronics for Kinect Lite project didnt work (Windows applications) I needed to use the original housing, so a mount was neccessary. Modeled a replacement part with a GoPro compatible mount, which is…
Inspired by the Cartoon of Road Runner and Wile E. Coyote and his strapping Rockets to his stuff. Print will require some finagling …. but a helper for the Coyote can do it! love to see your prints.. mine is in progress (heheh) .. if it…
Enclosure for popular type-c decoy trigger module (5V 9V 12V 15V 20V). Assembly requires standard computer case fan screws. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.2mm…
A simple case that accomodate a Pd decoy module 1.6x1 cm and a dc female or male barrel
Simple case for PD decoy, the module measure: 1.6x1 cm I've just uploaded two version: one square the other little bit bigger. Use glue for close it.
Printed in PETG. 2 Perimeters, 20 % Infill.
This is a decoy flare launching platform for an L-39 Albatros jet scale 1:3.5. For easy integration into the fuselage it's made of two parts. On the original L-39 Albatros it's mostly installed on the right side of the fuselage at the…
This is my Wile E Coyote slammed into the side of the MasterLiquid Atmos EVO Badge. I printed him using three PLA colors, .2 layer height, and normal supports for the bottom. I started with red. At layer 56 I changed to yellow. Then at…
They are easy and quick to print using 3 colors for both Roadrunner and Coyote. Color changes in the 3mf files. I used brown and white for Coyote but since the white is only one thin layer it shows as if it s beige which is actually more…
This is a case for a PD Trigger fixed voltage decoy board that can be used to connect a PD capable USB powerbank to a QRP Amateur Radio. The chosen PD decoy trigger module is a Youmile 2 pcs PD/QC/AFC fast charge decoy trigger which is…
Arizona Coyote Lightbox 3 Colors. Like most of my lightboxes it has a short top and tall bottom. I have also included 2 ways to load the files. STLs The STL's do not include Wall hanging hole or holes for the socket. Load all (Except…
This is for my Foxpro decoy, so I can add different toppers without taking apart the top. Just pop off the topper from the flexible wire and pop a new one on. Gcode file is 4 up. Print instructions print flat with no supports. Enjoy
This can attach a YT Decoy charger to a Feedback Pro bike stand. It should fit any charger that is less than 38x81mm. The stand has a diameter of 44.5mm. It clips onto the stand easily and the charger locks the bracket into place.
coyote's hole looney tunes resizable please like before download <3
Wile E Coyote - Bugs Bunny Coaster dont need supports can change the size or colors print in colors
Wil E Coyote on ACME missile Note: the missiles wick fell off while cleaning off the supports, so I glued that back on Printed on Photon Mono 4. Requires Supports. Copyright & Disclaimer This 3D model is provided for artistic and personal…
This is a hockey puck with the Arizona Coyotes logo on it. You can use it as decor for your house or even play hockey with it! Category: Other
