P
Printables
CURVER Verschluss-Deckel
Ersatz für den Ausgießer einer CURVER-Dose 2,2 Liter.
Wyniki wyszukiwania: curver
Liczymy pasujące modele…
P
Printables
Spare Handle for Curver ToolBox
Org. handle broke after decades of usage. So I replaced with a new design. Designed in TinkerCad. Printed on my BambuLab A1 with AMS lite: Handle: Tinmorry PETG-CF in olive, Supports same, support interfaces in Bambu PLA-PETG support…
P
Printables
Curver Toolbox Clip pt2
The other part of the clip for my Curver toolbox. Works perfect. Link here: https://www.printables.com/model/412420-curver-toolbox-clip PETG 0.2 layer height 100% infill no support needed
P
Printables
![Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]](https://media.printables.com/media/prints/a6af3295-ec40-40bc-abd5-65037fb621c9/images/12090731_68fc36fd-b5de-443d-b3c6-194ae6c23b36_1a76af87-bdcd-421d-8e37-5e1bafa943f5/cover-photo.jpg)
Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]
The Curver (brand) "Ready to Collect" bin comes with a mount plate but it's for screw mounting to a wall or other vertical surface This is my Ikea Skadis version of the same mount. It has reinforced Skadis mount hooks (my 5x5mm versions)…
P
Printables
Replacement Lid fits on Curver Organic Waste Container
The snap in place hinge on my original broke, so I designed a replacement part to fit this organic waste container from Curver. Mine was printed in PETG. I suggest you print it flat side down, with a textured print bed, you'll get a nice…
P
Printables
Under desk Curver box hooks
Those hooks fits a 16L Curver box - 39x30x21 cm, but they may probably fit others. The top height of the edge of the box is important. Each hook is attached to surface by 4 screws.
P
Printables
Curver Toy Box Handle Insert
We have some 20+ year old Curver boxes - not sure of the exact model. The EAN code suggests that they were called “Curver Toy Box 29l” not sure if they are still produced and under which name. They are nice and sturdy, but have one flaw:…
P
Printables
Spare Handle for Curver ToolBox
Org. handle broke after decades of usage. So I replaced with a new design. Designed in TinkerCad. Printed on my BambuLab A1 with AMS lite: Handle: Tinmorry PETG-CF in olive, Supports same, support interfaces in Bambu PLA-PETG support…
P
Printables
Drawer slide rail for Curver Inifinity box
This is my first 3D model. I needed a small drawer to keep any kind of small stuff handy but not cluttering my desk. So I designed a set of slides that let you make a small 23x15x5cm box into a drawer.
P
Printables
curver toolbox separator
Divider for the largest compartment in Curver transparent toolbox organizers (Curver toolbox premium M)
P
Printables
Wheel - Curver Storage Box
Prototype wheel printed with PLA, 0.20mm, 0.4nozzle. To check fit and finish.
P
Printables
Curver sigma rack stackable storage
Storage container designed to fit Curver Sigma Rack plastic poles with a diameter of 33 mm.
P
Printables
Curver ready to collect 10l plastic ring
I lost the plastic ring that secures the bin liners for my caddy and so printed this version that fits really well. The part was modelled in free CAD and just about fits in my Prusa mk2.5 bed Printed in PLA 0.8 mm nozzle and layer height…
P
Printables
Rails for Under Desk Storage Bins / Boxes CURVER INFINITY 11L / 17L
Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. Compatible with CURVER INFINITY 11L and 17L boxes (without lids) Box dimensions: L35,6 x B26,6mm Remixed from IKEA Trofast rail system. LONGSIDE and NO LONGSIDE…
P
Printables
Curver box holder
This is a simple wall-mount bracket designed for Curver plastic storage bins like the one shown in the photos. It lets you mount the bin securely to a wooden board / wall while keeping full access to the flip-open front . I made this…
P
Printables
Curver Toolbox Clip pt2
The other part of the clip for my Curver toolbox. Works perfect. Link here: https://www.printables.com/model/412420-curver-toolbox-clip PETG 0.2 layer height 100% infill no support needed
P
Printables
Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]
The Curver (brand) "Ready to Collect" bin comes with a mount plate but it's for screw mounting to a wall or other vertical surface This is my Ikea Skadis version of the same mount. It has reinforced Skadis mount hooks (my 5x5mm versions)…
P
Printables
Replacement Lid fits on Curver Organic Waste Container
The snap in place hinge on my original broke, so I designed a replacement part to fit this organic waste container from Curver. Mine was printed in PETG. I suggest you print it flat side down, with a textured print bed, you'll get a nice…
P
Printables
Curver Kühlbox Verschlussklammer - Cooler Box Lid Bracket
A clamp for the lid of a Curver cooler from the ~1970s For those who want to preserve this iconic piece of plastic history. Mirror if needed (L and R clamps are mirrored parts).
P
Printables
Curver Laundry Bin Lid Hinge Pin
Hinge Pin/Clip holding lid of my laundry bin got damaged (snapped in half) and lid was loose. It's a Curver bin which is quite expensive and nothing wrong with it other than that (and small chip underneath lid hence 2 cable ties holding…
P
Printables
Curver Toolbox Clip
A Replacement clip for my Curver toolbox. PETG 0.2 layer height 100% infill support needed
P
Printables
Curver LAUNDRY HAMPER rod replacement
Rod replacement for Curver LAUNDRY HAMPER https://curver.com/uk_en/style-laundry-hamper-1 Square middle part for better/solid sustain against break and easier printing
P
Printables
Curver landry basket replacement pin
Curver landry basket replacement pin I made it in bambu studio from primitives printe on Bambu lab x1c .4 nozzle .2 layer height Fiberlogy ABS
P
Printables
Curver Toolbox Clip Old Version
Clip für die alten Curver Boxen mit 2,5mm Stahlstift Ist dicker als der original Curver Clip damit er nicht so schnell wieder bricht. Print at 100% infill ASA, ABS or PETG Best.
P
Printables
CURVER Deco Bin Garbage Bin - Bag Holder Replacement
These bag holders make the garbage bin look nice, and the bag stays in place. But it breaks sometimes. The challenge here is the size of the complete part, which is slightly larger than the MK3/4 printbed. Therefore the model is…
P
Printables
Laundry basket hook (curver)
Simple hook. I use it to hang bag for socks or some damp handtowel. Print PLA
P
Printables
Replacement wheels Curver drawer system
The Curver drawer system came without 4 out of 16 wheels used for the sliding. So modelled and printed 4 extra ones. Clicks into place. Printed with PLA, 0.2 layer height with full organic supports.
P
Printables
Curver pedal bin (pedaalemmer) lever bottom part
Update 2023-09-16: Added single piece print for suitable printers. My toddler trashed our pedal bin. But no worry - this replaces the lever part between the pedal and the metal rod that lifts the lid. Split into two parts so you can print…
P
Printables
Curver storage box risers
These are simple riser hooks to attach to Curver brand storage boxes, specifically their infinity dots range. These are an affordable & sturdy storage box in the UK, found in many shops (mine came from B&Q) and they were £2.50 each. These…
P
Printables
Curver storage box name plate
After making https://www.printables.com/model/830367-curver-storage-box-risers I had the issue of having to move many boxes to see what I needed. The solution is simple, a small hooked nameplate. Tag ha a 60mm writing area so plenty of…
P
Printables
Kressezucht - Einsatzplatte für Curver Infinity Organizer 1,5l - Cress cultivation - Insert plate for Curver Infinity
Eine Lochplatte für einen Curver Infinity Organizer 1,5l zu Kressezucht. In einer Ecke gibt es ein Ausgussloch für das Restwasser Die Curver Infinity Organizer kann hier bezogen werden. Zwei Stück für 1,5€…
P
Printables
Réparation panier à linge 25L Curver / Repair parts laundry basket 25L Curver
Fabrication d'une poignée pour un panier à linge (marque Curver) : Poignée de remplacement. Impression sans support. Pièces à positionner sur le coté. Pièces à coller avec colle chaude.
P
Printables
Curver Tbox clip
Small clip to close the lid better on Curver T Box. Remix from original model for Samla box only a bit longer.
P
Printables
Replacement handle for "curver" tool box
printed in PLA with 4 perimeters and 20% infill, plenty strong enough. only needs very little supports on the buildplate for the hinge pins. Should work with any filament (except maybe TPU)