75 modeli
The DaggerHeart TTRPG uses relative ranges (melee, very close, close, etc) as a part of the game mechanics. This tool allows tabletop players to better envision the distances. This design was inspired by a reddit post from u/FaileasDhan…
A magnetic fear tracker for Daggerheart in the style of birds perching on a rooftop. Prints with minimal supports, only the bird magnet holes require them. Ravens often represent tricksters in mythology, which makes them seem appropriate…
Attached are all the files and images of the finished box insert It is tight fit between the two sections as I couldn't do dividing walls for the cards and I had planned to slip a thin piece of plastic or paper even just to help with the…
A simple 3D-printable ruler for measuring Daggerheart's combat ranges, using the Daggerheart font. Print one copy of "far", one copy of "close," and either a copy of "very close" or "very close w melee" AND "melee", and use the pins to…
Remixed from: https://www.printables.com/model/1304829-daggerheart-limited-edition-box-insert-for-cards-i Added some dividers Reduced some divider width to 1mm from 2.1 mm to fit additional dividers Removed the middle divider so long…
Marking and erasing status on their player sheets was working less and less well for my players, so I designed this stat tracker which “marks” stats using sliders and can be expanded as the character levels up. Print at 0.2 mm layer…
I made this token to be a physical representation of hope or fear points. I was inspired by https://www.printables.com/model/807070-daggerheart-token , but couldn't replicate the fine detail on my printer at the scale I wanted, so I built…
This is a Fear tracker for the tabletop RPG Daggerheart. It can be used to track how much Fear the GM has at any given moment and, if shown to the players, adds a nice reminder of the danger level that awaits for them. Plus, sliding a…
Some of the players in my Daggerheart game wanted to use card stands for their active cards. Most of the available card stands aren't ideal for Daggerheart, since you typically need to see just the lower half of the card. Some players…
These abacus-style trackers are easy to move during play, easy to save between sessions, and easy to add discs to as your character levels up or takes scars. The 3mf version of the player tracker contains the text for multi-color…
This is a remix of a card box that allows enough space to fit the core Daggerheart decks when they are in card sleeves.
A very quick make to allow me to store my sleeved cards in my original Daggerheart core binder. Print 8x cardboxes and 2x spacers. Print at 0.2mm for best results. Each cardbox holds about 45 cards tightly, though 43-44 is more ideal.…
A rugged box for the Cards that come with the core rule book of the Daggerheart TTRPG. The Box has separate departments for Ancestry-, Community-, Class- and Domain-Cards. Also two bins with space for Dice and Tokens are included.
A distance ruler for gridless TTRPG gaming, designed for Daggerheart but with standard units on it as well for other TTRPGS. Measures out to “Far” distance (60 feet), anything beyond the ruler is “Very Far” and off the game board is “Out…
I made support-free flying stands for both Dungeons and Dragons and Daggerheart. For the DH one I also made a halved versions in which I kept the proportions between each range (very close/close/far), but I cut them in half because the…
Easy print tokens of each domain for Daggerheart! Use them to track Health, Hope, Stress, or anything else you'd like! Drawing two from a bag can be used to randomly pick a class if you're indecisive :) Tokens come in engraved for simple…
A smaller version of Bluetopia's sleeved card holders. The original left some space when used in the limited edition drawer, this size allows you to print more containers so you can divide your cards into the domains or other categories.…
The Standard edition of the box set of Daggerheart contains six slots for storing the cards it comes with, and they fit, but barely, and may not be as organized as you would like. With this model, printed four times, you can increase the…
A somewhat compact table top fear tracker that prints in place.
At our next Daggerheart session the heroes are facing of an evil mage as a campaign milestone opponent. I wanted to try highlighting conditions like vulnerable or poisoned etc. on the minis with condition markers. I printed with 0.4mm…
This compact resource tracker is the same size as a standard Daggerheart card, but thicker. It uses 8mm cubes to track Hope, Armor Slots, Hit Points, and Stress. Optional blanks can be slotted in to indicate the character's current…
I looked at the items that others had designed already, but wanted something that would allow me to open the box and grab what I needed. Based off of space limitations I figured out a layout that would give me 12 slots which matched the…
I designed this model for laser cutting out of acrylic, but it should work well for 3D printing as well. I painted the words while the protective sheet was still on the acrylic, wiped the paint off, and gave it a couple of minutes to dry…
This STL file is a custom-designed bracket for use with the tabletop RPG Daggerheart, created to display "Fear Tokens" on top of a Game Master's screen. The bracket includes oversized recessed holes sized for 6mm magnets, allowing…
A dagger to measure distances in the TTRPG "Daggerheart". It is optimized for 25mm grids with the hilt showing ranges from "Melee" to "Close" and the Blade showing the "Far" range. The last 1mm can be printed in a different color to…
Includes 10 card holder variants : one for each of the 9 Daggerheart Domains (each featuring its domain symbol), plus a 10th with the Daggerheart Compatible icon. All symbols are engraved 0.5mm into both the front face and the back of…
While playing Daggerheart (Critical Role's tabletop RPG), I realised I wanted a way to keep track of Health, Hope, Stress and Armor without pen and paper or a phone. So after a few iterations I ended up with this! My goal was something…
I have been asked to remix the Daggerheart player tracker from Aaron for MMU printers. I simply used the colouring tool from PrusaSlicer.
I've made these to more visually track character stats in the Daggerheart tabletop RPG game, such as HP, Hope, Stress, and Armor. It can be used to track anything really that is earned and spent in discrete units. Instructions Stats…
A box with 6 removable cups for holding tokens. It can be used for any games but it was modeled with Daggerheart in mind for Hope, Fear, Health, Stress and armor tokens. The sixth cup is for the miscellani tokens for cards that require…
These tracker dice have been designed for the official Daggerheart game master screen but should work with any screen with a panel length of at least 280cm and maximum thickness of 3mm. You can print one model 12 times (I recommend the…
A box to contain all my Daggerheart Cards in. It fits all cards sleeved, plus space for more in the future. I'll be making some dividers soon as well for the box.A box to contain all my Daggerheart Cards in. It fits all cards sleeved,…
I created a box insert with the great https://github.com/dppdppd/The-Boardgame-Insert-Toolkit Its a tight fit but the box closes without problems. If you want to edit the SCAD, just drop it in the Toolkit folder and open it in OpenScad
São 2 arquivos diferentes de cada peça. Escolha seus modelos e imprima 8 Organizadores e 2 Espaçadores. É recomendado imprimir a espessura das paredes em no máximo 0,8 mm para obter melhores resultados. Modelos de organizadores: 1 - Com…
This is a tray to fit in the Daggerheart limited edition drawer. 4 of them can be printed to fill the drawer width-wise and a set of card holders can be used for cards not in the trays. Printing Designed to be printed with default…
I used https://makerworld.com/en/makerlab/parametricModelMaker to make a simple deckbox for sleeved Daggerheart cards
Tactile way of tracking player trackers like: Hope, HP, Armor and Stress. Max range for each counter that can be tracked is 15. Most of the values in Daggerheart cap at 12 but a maximum of 15 is possible with the right combination of…
I've seen other rings, but they are either not very legible, or don't have many conditions in the game
Got the limited edition box, and wanted to keep all my cards in it, but have them all sleeved. 6 of these fit nicely in the box, together with the tokens and dice bags. Could print more in the future for further cards. :) I used Paladin…
Check my profile for coins with shallow relief sculpts of monsters to add into the coin standees / holders. I will also have a selection of full 32mm miniatures form your gaming table. Enjoy. Support me here:…
Because the Daggerheart RPG has 9 original Domains, fitting holders in a 3x3 grid neatly stows them in a single layer inside the original box (with the injection-molded six-bay holder pulled out). This holder is slim enough that you could…
Daggerheart Card Holder with Vault Divider. It can hold up to 20 thick sleeved cards with a divider saying “Vault”, and more with thinner sleeves. 20 cards should be enough for a max level character. I'll be using this to hold my players…
Track your Health, Armor, and Stress in Daggerheart with this mechanical point tracker. Interchangeable caps mark which stat is being displayed. Able to display points up to the universal maximum of 12 and you can quickly adjust the frame…
Designed to be printed on a Prusa XL 5 Tool Head. Text side should be on the print bed.
Used a image from Daggerheart and Tinkercard to make a simple divider for my card.
We have limited space at our table, so I designed a little accessory for my players. Switches are PLA, the card holder is LW PLA because I had a lot of it. It was my first time designing compliant switches with a limited time for…
Rings can be printed in a mix of materials as they were designed to have the main portion of the ring printed in flexible filament so that they had some give. Case requires eight 12mm diameter x 3mm thick magnets. When printing the case…
I added inner sleeves to all my cards (specifically these ones ) and needed a good way to store and carry them. I tried the inserts for the original box but the sleeves added too much bulk. This is a remix of two models. I loved the…
This is a remix, of a cardsized resource tracker made by @Grison_15297. This compact resource tracker is the same size as a standard Daggerheart card, but thicker. It uses sliders to track Hope, Armor Slots, Hit Points, and Stress.…
Simple abacus style fear tracker for Daggerheart.
Daggerheart fear Raven token Raven (remix) and storage I remixed the raven fear counter token so i could but a 6mm magnet in it to stick it to a magnetic dm screen. Storage container Designed in Plasticity Printed on an Anycubic Cobra 3v2…
A 3D printed positive to make a silicone rhombic d12 negative for resin casting. The print comes in 3 parts. Parts 1 and 2 make up the bottom part of the negative, and part 3 works by itself. In order to connect parts 1 and 2, you will…
Works both on table top and on a dm screen. Used the bottom piece of a metal coat hanger for the rod.
Range ruler for melee, very close, close, far. Adjusted it to print as a single piece without pins using MMU3.
These were designed to be used as chucks for moulds, but can be used as tokens or other game pieces. Includes all of the Daggerheart domains, including the Dread domain recently released with the Hope and Fear expansion. If you do make…
An additional matching card box to fit the cards for the new domain in the Daggerheart Hope & Fear expansion. Print this to use with existing project - Daggerheart 3x3 Card Holder Set with Engraved Domain Symbols & Dice Box
Based on JesNoFear's Matt's Bird Board Topper v1.stl The original from JesNoFear was too big to have two of them on the player side of my Dragon Shield Game Master Companion screen (32cm wide panel, 6.5mm thick). So I scaled it to 66%.…
Hello Wonderful People! This was a little project to learn how to 3D model, so I made something my friends and I will use. I hope this helps someone. Remixes are all good as long as you credit me somewhere in the description. -No extra…
I looked at the items that others had designed already, but wanted something that would allow me to open the box and grab what I needed. Based off of space limitations I figured out a layout that would give me 12 slots which matched the…
Used a image from Daggerheart and Tinkercard to make a simple divider for my card.
I used https://makerworld.com/en/makerlab/parametricModelMaker to make a simple deckbox for sleeved Daggerheart cards
Tactile way of tracking player trackers like: Hope, HP, Armor and Stress. Max range for each counter that can be tracked is 15. Most of the values in Daggerheart cap at 12 but a maximum of 15 is possible with the right combination of…
Because the Daggerheart RPG has 9 original Domains, fitting holders in a 3x3 grid neatly stows them in a single layer inside the original box (with the injection-molded six-bay holder pulled out). This holder is slim enough that you could…
We have limited space at our table, so I designed a little accessory for my players. Switches are PLA, the card holder is LW PLA because I had a lot of it. It was my first time designing compliant switches with a limited time for…
A 3D printed positive to make a silicone rhombic d12 negative for resin casting. The print comes in 3 parts. Parts 1 and 2 make up the bottom part of the negative, and part 3 works by itself. In order to connect parts 1 and 2, you will…
Includes 10 card holder variants : one for each of the 9 Daggerheart Domains (each featuring its domain symbol), plus a 10th with the Daggerheart Compatible icon. All symbols are engraved 0.5mm into both the front face and the back of…
São 2 arquivos diferentes de cada peça. Escolha seus modelos e imprima 8 Organizadores e 2 Espaçadores. É recomendado imprimir a espessura das paredes em no máximo 0,8 mm para obter melhores resultados. Modelos de organizadores: 1 - Com…
I wanted to have a better way to store my Daggerheart cards, so I went with this. It will keep each domain separate and provides space for the classes associated with each domain in the row (I went with the first domain listed for sorting…
Made it more solid, and use more filament. :)
Party gold tracker for Daggerheart. Tracks up to 166,665 handfuls.
Cade boxes to organized the Daggerheart cards while sleeved inside the box of the Daggerheart standard edition. Each box holds a total of 35 cards sleeved. Extras: 6 x D3H1 Magnets from K&J Magnetics…
No glue, magnets, or supports required. This is my design for organizing Daggerheart cards using the original game box, optimized for space and presentation. Each sleeve is low-cut to display the card's emblem for easy identification. The…
Handheld resource tracker for Daggerheart. Designed to be printed on Prusa XL. Flex hinge should be printed in flex(TPU) with the core of it being printed in a rigid filament(PLA)
A simple try for keeping track of resources in Daggerheart. Can be used with and tokens of your choosing such as the selection of gems that came with the deluxe editions.
it's tokens to use for the Daggerheart game that currently is in beta testing. i would use 3 different colors to signify fear, hope and player turn tokens.
