Liczymy pasujące modele…
I absolutely fell in love with the Gecko by Ehdrien the minute I first saw it. I immediately built one and as one does I found things that I wanted to change. I'm not one for modifying stl files as the results can be meh at best…
As disappointing as Comandante is as a brand when it comes to dealing with its competition, I bought my c40 a while ago and while using it for espresso, I realized that I wanted half steps, even with the red clix (very expensive) mod.…
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
Cap with integrated crank-clip for the Comandante C40 (Mk4) The cap uses friction on the inside of the grinder (i.e. the metal not the wood). There is sufficient clearance so the wood veneer should not be touched by the cap. Make sure…
I've been grinding a lovely single origin yirgacheffe lately, but as the beans are small I've had a few of them get stuck down in the gap around where the grinder handle fits onto the burr drive axle. I've also had the occasional bounce…
A model of weapon system inspired by Czechoslovak howitzer DANA. Model on the photo was printed using Prusa MK4 with 0.25 nozzle, FillamentPM RePLA and with 0.07 mm layer height. Model Usage The model can be used for any 6 mm scale war…
Two models are made. Dante sword 1 piece - single piece with a reinforced keychain attachment. Dante sword 2 pieces - One model is mirrored, keychain attachments are thinner, but once you glue them together will have enough strength not…
This is my very first attempt at fitting a 3D design to a real object. It's a magnetized lid for my coffee grinder the Comandante C40 for when I am traveling. I made a chamber for the magnet with a HEXA pyramidal roof that will bridge…
Dante's sword from Devil May Cry 5. Not 100% accurate to in-game model, edited to be easier to handle. Created so that the blade and handle can be removed and substituted with other material (e.g. wood).
I love my Comandante manual coffee grinder but I always forget to how many clicks I had set my burr, especially when switching between coffees and brew methods. So I created this little counting gadget in Comandante style. It makes a nice…
The Comandante C40 is known to struggle with getting the right grind setting for espresso, so I first went out and got myself the Red Clix set - which definitely improved my experience making coffee but I still felt like I was sometimes…
Dante Belt Buckle Devil may cry 4. Paint or coat in a metallic finish. Print instructions Category: 3D Printing Summary Dante Belt Buckle Devil may cry 4. Paint or coat in a metallic finish.
Tired to having to move grounds from my grinder to the aeropress (not to mention the mess of spilled grounds) for the inverted method, I designed this (rather strange) adapter.
Transport cap specifically designed for the Comandante C40 MK4 coffee grinder. A slot is provided for a 4mm diameter and 1mm height magnet to securely hold the cap in place. Available Files: File formats: STL Printing Instructions: This…
I highly discourage anyone from using a drill with the COMANDANTE hand grinder, it's a very precise and fine tuned german handmade piece of equipment. This is a grinder meant to be used by a passionate hand, and used by many to win the…
Comandante C40 Drill Adapter V2 use collar with screw-nut to grip the side of the grinder instead of using inner shaft. The cutout on the drill interface fit this drill specifically: DELTON PRO-S-28V You can modify the model to fit the…
The commandante C40 is one of the best manual coffee grinder but sometime the plastic cap may need to be replaced. Here is a printable cap. PLA was used on the picture. More info on the commandante C40 coffee grinder:…
When I grind 42 g of coffee in my Comandante C40 for some bins grounded coffee won't fit into original container. So I've designed slightly bigger (longer) one :) Print as you wish, no supprts needed. Remember, 3d prints are usually NOT…
I wanted something for my friend group that loves Limbus Company. Decided to throw it up on here for all to download. I provided the STL and the 3mf formats. One for painting and the other for multi-material printing. Normal Settings…
Original cover fell apart after a few years of use, so I designed a new one. It press fits the same way original does, might need to play a bit with XY compensation parameter as it requires a tight fit.
If you have the hand coffee grinder Comandante MK3, you propably know the problem of beans getting stuck in the center where the crank is attached. The funnel (my first 3d object for printing) covers this recess and enlarges the bean-drop…
Comandante C40 MK3/4 knob is fine, but I wanted to try the Big Joe. Instead of buying one, I decided to print it :D There's a great model designed by @kaanyaren but it requires a snap-on button with the correct dimensions. Instead of…
This is a funnel for the Comandante Mk3 coffee grinder. It also covers the shaft’s hole so beans won’t get stuck in it.
Este modelo 3D representa a Diana , uno de los personajes más emblemáticos de la ciencia ficción televisiva de los años 80. En la serie V (1983), Diana es una de las líderes de los Visitantes, una especie alienígena reptiliana que llega a…
Heyho there are solutions out there for a better fine tuning of the comandante grinder. But I didnt like all of them :D The mods for the existing Wheel arent that accurate and still not stepless and if you use a wing nut to secure a…
As fanboys know, the best hand grinder on the planet has some alternative handles like Big Joe or skateboard versions. Big Joe is not my thing, I don't like to hold on to big things while grinding, but I needed some better grip and easier…
Pla friendly model. Recommended to print with 0.12-0.16 mm layer, supports on (tree supports ideal). Best result at larger size and slower printing. Material: PLA Layer height: 0.12-0.16 mm (for detail) Nozzle: 0.4 mm Temperature: 200-210…
Quick and dirty remix of "Comandante Grinder Funnel with Shaft Cover" with the slot around the axle widened. My thoughts were that the axle hole does not need to be snug, I'm just popping it on while pouring in the beans and then taking…
Recommend a food-safe material. I have been using PLA, known to be at least non-toxic. The model should be printed with supports. The original plan was to design it not requiring supports, but I did not have time to refine it. The large…
This model consists of a Lid and a clip to attach the handle of the coffee-grinder to the side of it. It is designed specifically to the commandante (as that is my hand grinder) but you are allowed to remix it to any other grinder out…
enhanceed the trigger strength extract the exact length of the magazine the mag have coil spring guide rail make the trigger spring cover more fittable.
I had my issues with recalling the current setting on my Comandante .. so i created a small indicator ring. I used a label machine for the settings indicators. Printed with tpu95
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
"Abandon Hope All Ye Who Enter Here" is a phrase borrowed by Dante’s Inferno which is written originally in italian as "Lasciate ogne speranza, voi ch’intrate". It is said to be inscribed above the gates of Hell. The author describes his…
Comandante top lid. Printable flat on printbed without supports I included the original model to let you adjust the hole size for a snugfit. Original crank diameter 11.7mm, model has a holesize of 11.8mm printed in transparant PETG
Annoyed by grinds getting between the support and the shaft of your Comandante grinder ? I am. So first thought was to print a cover. Than I realised if I'm making a cover I might as well print a funnel too. Why not mix them. Well here it…
Alternative drill bit for the Commandante C40 MK4 (instead of a 5,5mm plug nut) - print with PETG - 100% infill - printable without supports
Dante Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) Figures and Monsters: https://www.printables.com/@StudioMechanik/collections/3030657
I needed a mount for a Dante Avio adapter that securely holds the device while allowing for easy removal of the adapter. Since I couldn't find anything suitable, I designed this mount. The mount can be attached using M3 pan head screws,…
Skadis mount for Ikea Skadis pegboards. Fits the C40 but should also fit for the c60 to.
This nifty print prevents coffee beans from falling into the recess of the hexagonal drive and eases dumping the beans into the grinder. Prints without any supports.
Update: V2 is here https://www.printables.com/model/233329-comandante-c40-drill-adapter-v2 But V2 needs nut and screw. This V1 has issue where drill counter toque is act on the inner shaft stabilizer (the 3 thingy inside the grinder),…
Ayudante pasacables - cable wire pass helper
Simple print to organize your Comandante grinder main components. Holes have the same size as components size differ a little bit. This way you can organize them however you want. Nice addition to it would be a click counter which I have…
Do you think the standard plastic lid of the commandante looks cheap? Here is an alternate lid that fits on the barrel rather than the crank, which also makes the crank more portable.
Dante (Durante degli) Alighieri — Bust This bust depicts Dante (Durante degli) Alighieri (1265–1321), the Florentine poet, writer and thinker regarded as one of the most important figures in Western literature and one of the fathers of…
Descripción del modelo 3D Soportes para realizar el trazo de las letras mayúsculas y minúsculas. Hay ocasiones en los que realizar los trazos de las letras, se convierte en algo realmente complicado para los niños. Estos ayudantes de…
@RedCowls Nightingale mag shortened to suit Dante Blaster
Print shown used filamentum nonoilen filament, as that's supposed to be food safe. I will likely have this printed in aluminum or stainless steel for long term use. The whole point of this was to not have to buy comandante jars that don't…
My spring sat out past the bottom of the frame so used FIBs extented cover and extended it even more and added a cut out
Here's the updated description with that info folded in: Dante Avio Wall-Mount Enclosure A clean, professional enclosure for the Dante Avio series audio adapters — designed for permanent installation in equipment rooms, backstage panels,…
Portachiavi Comandante Spock
EZDante (or „easy Dante“) is a portable motorization for the coffee grinder Comandante C40 MK4. The general idea incl. the selection of electronic parts was taken from the Kaffee-Netz forum . So a big „thank you“ goes to everyone who…
This is a simple bracket to allow the AJA Dante AV to be mounted along a rack system. https://www.aja.com/products/dante-av-ultra This bracket allows the Dante AV to be mounted at 90 degree rotations. You will need 2x 4-40 flat head…
1zpresso x-ultra to comandante jar adapter Polypropylene PP | MJF
you will need parts from the base figure to make it you also will need this for the guitar
Magnetic adapter for your Comandante C40. Just glue in some 6x3 magnets.
Adattatore per Stazione Dissaldante ZD-895 o simili. Al momento ho Forato e messo un Connettore Cieco per Tubi Aria, ma si può mettere qualsiasi cosa che si adatti al Tubo di Gomma della Stazione Dissaldante. Aggiunto Supporto da Innesto…
Use regular Multipoint fixpoints ( https://multibuild.io/parts/fix-points?category=multiboard ) or rails ( https://multibuild.io/parts/rails?category=multiboard ) for mounting.
Fits the C40. There's a knurled and un-knurled version. You need a different size soecket for the C40's axle. I'm using a 7/32
Ready to print, keep orientation PLA 0.20 20% gyroid infill 4 perimeters
Descripción del modelo 3D Soportes para realizar el trazo de las letras mayúsculas y minúsculas. Hay ocasiones en los que realizar los trazos de las letras, se convierte en algo realmente complicado para los niños. Estos ayudantes de…
Este modelo 3D representa a Diana , uno de los personajes más emblemáticos de la ciencia ficción televisiva de los años 80. En la serie V (1983), Diana es una de las líderes de los Visitantes, una especie alienígena reptiliana que llega a…
Here is the model for Dante Bear. Dante is currently deep in thought about how he can get to and rescue his true love. Dante is a good Friend of Barry, and i'm sure he would like to be your friend too, do you have space for Dante? maybe…
EZDante (or „easy Dante“) is a portable motorization for the coffee grinder Comandante C40 MK4. The general idea incl. the selection of electronic parts was taken from the Kaffee-Netz forum . So a big „thank you“ goes to everyone who…
The best Rebellion 3D model you’ll find on the internet! For the most epic Dante cosplay ever! - Accurate to the source material - Fully tested - Print ready and oriented optimally All 3D models in this shop are made by a propmaker. I…
Here is the model for Dante Bear. Dante is currently deep in thought about how he can get to and rescue his true love. Dante is a good Friend of Barry, and i'm sure he would like to be your friend too, do you have space for Dante? maybe…
Revil Commander mask to print in one piece. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Mascara de Comandante de Revil a imprimir en una sola…
