Liczymy pasujące modele…
This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Type: Protractor Size: 150 x 84 x 1.50mm
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix allows the buffer to be fastened to the shelve using the existing method, but oriented in a 45 degrees angle. Some background: With the great designed MMU slot buffer by Martin_J placed on a shelf above my printer I experienced…
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets. 135 degrees version of them can be found at https://www.prusaprinters.org/prints/43057-20-mm-wide-135-degrees-t-slot-angle-brackets
Only for those without M2 screws no other reason to print this instead of original. THE FIRST FILE HERE: https://www.prusaprinters.org/cs/prints/13780-mobius-kaleidocycle-box-kinetic-ring-box…
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets. For 90 degrees versions of these brackets, see https://www.prusaprinters.org/prints/43117-20-mm-wide-90-degrees-t-slot-angle-brackets Support is not needed…
Seemed mad to be using a protractor to align my triple monitors with a 3D printer available! Created a simple template to help align the three monitors on my sim racing rig to 45 degrees or 60 degrees. Should work with any size of monitor…
Designed by myself, enjoy!
The snapmaker U1 door opens to the left and 90° only. This external print in place hinge helps to open 180° or to right side. See the pictures Use strong double sided mounting tape. Wipe with Acetone and Isopropanol (in that order!) to…
Five33 Flip Switch Freestyle Frame GoPro 11 mini mount 20 Degrees PS3 holes
Just print out 2 mains rivet them together and the tube size you have 100% infill. 38, 40, 45 and 50mm or 1-1/2, 1-5/8, 1-3/4, and 2" Press them in on the dashed line for your central line radius your bending die has 4", 4½", 5", 5½",6",…
Five33 Freestyle Frame GoPro 11 mini mount 30 Degrees PS3 holes
I've put my printer into an IKEA Platsa cabinet and needed a solution for safely mounting the MMU2 unit. You will need: IKEA Platsa Cabinet IKEA Hjälpa Suspension Rail
The ramps that came with the Edifier M60 speakers are a bit too tall to fit under my monitor the way I'd like, so I designed some that are a bit shorter. It's a roughly 11.5 degree ramp that lifts the front of the speaker about 32mm.…
Quickly modified the fantastic parametric box by TheSameNameTwice to fit these two machinists squares I found on Banggood: 90 degree:…
Hang a small tool on your Multiboard using its existing hanging hole. This compact hook attaches to a Multiboard Flush Snap and rises at a 30-degree angle. Design dimensions Hook angle: 30 degrees. Intended tool hanging hole: nominal 3.7…
This clip connects onto the back of the Lego Wreath Branch when using it in a 45 degree angle (6 branches) configuration.
I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…
Lesson Plan & Constraints: The Objective of this print in place project was to take an image online and trace that image in the software Solidworks and make it a 3D object within a 8cmx8cm constraint box. While doing this my partner and I…
Tested on my DDR5 setup with 4 RAM Sticks and the RAM temperature was reduced by 6-8 degrees C. Includes two models, one is combined, and the other offers capability to separately print the cover (in case you want to print the cover with…
A 90-degree bridge ramp for wooden train track that allows train cars to transition smoothly between different elevation levels while making a quarter-turn (90-degree) curve. The curved design makes this piece ideal for smaller play…
I made some modifications: Added shorter double-sided version, tracks on both sides. Added shorter version double female connector. Changed connectors as in .pdf file just to be sure (fits Smuk3D's files) Print Settings Printer: Print…
Ubiquity Unifi Door Access UA-G2-PRO UA-G3-PRO 30 and 45 degrees Angle. picture are of the 45 deegress was for the ver1.0 where the mounting holes are a bit off and Wall mounting was too big (used radius instead of diameter). should be…
This is a remix for the well-fitting mount made by Kavelry3D for the Milwaukee M12 drill/impact/hammer drill mount to mount under a shelf. Mounting surface is at 45 degrees which requires it to be mounted pretty near the edge of a shelf…
Remix to use the camshells with H4 M2 14mm hexagonal standoffs
I modified the intake model to fit my IKEA LACK enclosure in a corner.
The snapmaker U1 door opens to the left and 90° only. This external print in place hinge helps to open 180° or to right side. See the pictures Use strong double sided mounting tape. Wipe with Acetone and Isopropanol (in that order!) to…
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
Use high resolution for printing to eliminate steps on wedge. Needs support under the relieved area. A better way of printing a smooth slope is to use smooth PEI plate and print with the slope on the plate.
Display arm extended and angle adjusted by 7 degrees
This model was designed by myself with the need of a 90 degrees spool holder for my E3V3se that does not require additional screws and relay on the original metal spool holder. There are two models. I would recommend the 2.0 model since…
Good for hobby RC and other applications where intake diversion is needed. Helps keep dirt out as well. Can be directed forward on an RC car and used as a ram air intake. I printed it with TPU for durability but this is not needed. High…
An elbow with redirection of approx 25 degrees designed to redirect water going out of my gutter to grass with another pipe. I think that picture is worth more than a 1000 words.
Simple part that allows you to mount a 10mm led strip onto a 2020 extrusion, at 45 degrees angle. Especially useful as 3d printer light for bedslinger models. Trim or elongate the model to fit your extrusion length, slide the led strip,…
The ramps that came with the Edifier M60 speakers are a bit too tall to fit under my monitor the way I'd like, so I designed some that are a bit shorter. It's a roughly 11.5 degree ramp that lifts the front of the speaker about 32mm.…
It's a 90-degrees Square Ruler right angle measurement tool. Enjoy! btw if you want a 6in. ruler, it is on my profile page.
[Update 3 JULY2025] CenterUnit_v2.stl LowerAzimuthPlate_v2.stl //Modified clearance for bearing UpperAzimuthPlate_v2.stl //Modified clearance for bearing and change M4 to M5 for adjustment parts. I have made a type of Polar Fine…
Fully printable small 45 - 90 Degree cutting jig for Japanese saw and jig saw. You can fit up to 50mm wide and 30mm high piece of wood. I recommend to print the jig at 0.2mm layer height, 4-5 perimeters with 20% rectilinear infill.
Did you mount your Camera on the wall to record your work? The camera need a little extra tilt? Print this! In my case the DSLR camera is monted to record Youtube videos on our engineer station. But the camera was not in the right angle,…
This clip connects onto the back of the Lego Wreath Branch when using it in a 45 degree angle (6 branches) configuration.
Print two of these in strong weather resistant filament. Hook them first and swing them around underneath the top part of the garage unto the tongue/grove to secure. Update, Shim-5 is a 5 deg shim that gets the garage a bit closer to the…
Finder Tool with 0 - 180 Degrees Angle Set Square 200mm & 8inch or Set Square 20cm & 8inch or Set Square 20cm Protractor Angle Ruler 180 Allow Screw: 1 x Nut M5 1 x Cap Head M5X20mm Filament: PLA, PETG, ASA & ABS Thank you ;-)
a steeper angled part (50 degrees) to improve the directionality of the tweeters, with the sweep starting on the bottom surface to prevent touching the windscreen. best to print this in PETG or ABS, as with direct sun, it could get quite…
Xgimi Mogo 3 Pro projector stand for 180 degree rotation compared to the closed position. Useful for projecting the image onto the ceiling. Empty and elevated to facilitate air movement and avoid cooling problems.
Just print in the given orientation No support needed, but depending on your parameters you might add some support on the outer piece though.
Overhang test between 70 and 80 degrees with a 1-degree step. Pictures show MK4S test. PL: Test zwisów od 70 do 80 stopni z 1 stopniową zmianą. Wydruk testowy z MK4S.
I have included the inventor file that I used to make this with so feel free to change the angle to your hearts content. Update: Printed and checked the fit, still a little tight, just needed to debur a little on the square locking…
TBS SourceOne GoPro Couch (30 Degrees) Made this couch but haven't tested fitment yet. Feel free to try and report back. Category: R/C Vehicles
Hello friends! Here is my version of the 90 degree heatbed cable cover for the original Prusa i3 MK3. I recently received it (and its wonderful), and I put it inside my IKEA Lack case (I previously made thanks to Prusa who published a…
Lesson Plan & Constraints: The objective was to design and print a 3D-printed object derived from a simple-to-draw sketch of our choice. All designs must be made from an initial sketch, which are then to be offset numerous times,…
I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…
This is a tool to correct the angle for a triple monitors setup for sim racing
This is a 45-degree stand for the original touchscreen display that attaches in the original location using the same screws. An additional 3 screws identical to the original ones and 3 nuts are required for installation. There are…
“Made for the Tiny Whoop Pinch Camera, and Diamond Style Flight Controllers. You will have to cut 75% of the front post on the BetaFpv Air75 Frame and shave a little plastic off of the bottom of the frame under the front post.” Copied…
Lesson Plan & Constraints: The Objective of this print in place project was to take an image online and trace that image in the software Solidworks and make it a 3D object within a 8cmx8cm constraint box. While doing this my partner and I…
I needed to lean the display towards me so I could read it more easily. This bracket mounts between the existing mount and the display. You will need: 2 of M2 by 20 bolts 2 of M2 nuts 2 of M3 by 8 bolts 2 of M3 nuts
The holders are built so that the PTFE tubes enter and exit the MMU straight, i.e. horizontally. For this reason, and because the PTFE connections would collide when the print head is raised to the max, the holders are raised by 40 mm.…
Forces cables to retain a 90 degree angle. Useful for tight spaces. Category: Organization
Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.
helps you see your surroundings more 30 degrees instead of 15 degrees
This is just a remix of cuzzea's work, eliminating the colder temps that won't work for my PETG (Hatchbox). This one goes 220-260, use cuzzea's exact instructions for setting up the post processing script. Nothing changes except the top…
Adjusted the angle of the PTFE connectors so it's now angled by 15 degrees to reduce friction in the setup. Otherwise identical to the original.
Hello, today I have a Christmas decorations model for you. Christmas Tree Bauble 360 :) Cześć dzis mam dla was model ozdoby świąteczne. Bombka Choinkowa 360 :)
BOSE Cube 90 degrees angle Sastekwads.be is a Belgian webshop specialized in drones and related products and services. For more information about their offering and services, visit their website: Sastekwads.be.
Drop BMR1 stand 40 Degrees. No supports needed. All pieces should just friction fit together, but you could dab some super glue if you're worried. Make sure it's fully dried before you attach it to the speaker, or the glue may spread and…
Mounts motion sensor under 40 degrees, for the otherside just simply mirror the model
I needed a launch pad with more angle than typical 30, so did tinkered existing design. Added ventilation, 9mm feet location (it makes sense to add silicone feet for stability). I extended the lip by 2mm because existing approach did not…
Planning to buy something on Prusa3D.com? Use the referral code @FFFprint at checkout and get rewarded.
Just a simple universal design corner clamp that i use for my woodworking jobs and it can also be used as a distance keeper for furniture building. For good resistance if you plan to use it a lot in the workshop, i recommend printing it…
If your a Mason you understand, if your not then you wont so Ill leave it at that. SMIB https://www.patreon.com/OTL3DPrinting/redeem/1A42E First 10 people to sign up will receive their first month free on the support tier on my Patreon…
You will need: M3x30 bolts (4pc) M3x10 bolts (12pc) M3x6 bolts (2pc) M3 nuts (8pc) M3 heat inserts (2pc) I recommend you to put some 2 sided tape on under the hinges to increase stiffness
a handy suction tool . very easy to use. in places that are difficult to reach... for miele 35mm connection suction mouth 243mm outsite te tool
This hanging soap dish will really only work on towel rods that are square and mounted at 45 degrees. I needed one for my bathroom so I put this together. Built in Blender, printed in PLA, painted then sealed with clear coat. I sized the…
Customized version of https://www.thingiverse.com/thing:1904805 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=1904805 Instructions Using the following options: intDiameter = 14 wallThick = 2 openAngle…
HOW TO PRINT: Layer Height: 0.2 mm Supports: No Infill: 10% Print on the side for even textures on the top and bottom.
After modification to the RC1N controller, I picked up these dualband antennas from Amazon: https://www.amazon.com/dp/B07YRSPRK6?ref=ppx_yo2ov_dt_b_fed_asin_title They are large and do not stand upright. I designed this print to snap over…
Copied in TinkerCad from Kilinich, carefully deconstructed, adjusted and reconstructed to reduce the rising angle to 40 degrees. I decided to keep both the front and back 40degrees, which in retrospect is not very smart; to should be 40…
Cable management for HSW for placing the cable at the top or bottom of the HSW.
I wanted to move the center of the filament spool mass in line with the z-axis to reduce the wobble… You'll need two additional M5 bolts the same size as the original ones and two M5 nuts (or four M5 bolts if you want them all to be the…
90 degrees Angle wood screw-PARAMETRIC simple model for a 90 degrees angle bracket
I'm sharing it in case anyone finds it useful, I haven't used it in the end, but it works perfectly.
This was made for a Sonicake brand guitar pedal. It has a flat at the top that is 94mm long, and 42mm wide, 25mm tall on the lower end. It should print on its side by default, so no supports are required
This model is compatible with the lego system.
Update: 8 slot rail is now filled. ----------- Scope can't depress far enough? Use 1.5 degree down angled rail. My Zius BK-1S throws darts at 50 m/s (165 fps). At 10 meter range (33 feet) I experienced 20 cm (8 in) freefall drop, which is…
There are over 29 remixes of this model, but I couldn't find one with a 90° angle for the IKEA Bjursta table.
The 6 degree silly scar was good, but I didn't have any megaXL darts to fire, so I changed it to shoot rival rounds
no supports needed To fit the cables in, push back the wrap as long as the connector-cover. Start on the “plug end” by sorting the wires side by side und push them into the gab carefully. The wrap of the cable can be pushed into the…
Mount prusa lcd screen separate from printer
The back of my printer is close to the wall, so the classic chain was not a viable option. By twisting a connector by 90° I can let the chain move between the bed and the structure. Print Settings Printer: Hictop Prusa i3 Rafts: Doesn't…
Reolink E540 -40 degrees bracket. After mounting the camera, it allows you to set it for downward viewing, e.g. when mounting it at a high altitude. The holes are matched to the factory bracket mounting spacing. Mocowanie do kamery…
Firefly 1S FR16 Nano Baby Quad - battery holder GNB 720mAh - rotated 90 degrees.
I recommend scaling up to 1" on the sides (166%).
![Mostrom Print In Place Shaky Mountain Models (15, 20, 25, 30 [Degrees])](https://media.printables.com/media/prints/1033500/images/7904985_fde6caee-b770-4614-9621-188a79c3085d_46f17a9b-75a3-4d67-9ac1-ce0c45cd3729/screenshot-2024-10-17-130218.png)
