26 modeli
Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…
Replacement grill for the Hifiman HE400se. Planar magnetic headphones such as this one are extremely sensitive to anything interfering at the backs of the drivers. The stock grill on this headphone is a very obstructing grill with a…
I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.
Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…
The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end. On the original model, the nubs could be…
This is a headphone stand i modeled to fit my HIFIMAN HE400SE headphones. It can print without support. I printed mine on my Creality k2+ in PLA-CF. I included the F3d archive so you can modify the design. I included 2 versions, one that…
If you have broken the plastic ring (like i did) or you want to customize the HiFiMAN HE400i ver.2020 you can easily print this using PLA or PETG, no brim, infill or supports required, prints very fast and fits perfectly (be aware that…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
Tangoinnos Fire4000 Rangefinder Front Protective Cap. Cap rotates 270 degree to lay flat on the unit. Detent built in to keep cap open. Frame clamps onto front of unit. Bill of material (1) M3 x 3mm CNCKitchen threaded insert (1) M3 x 8mm…
For those who like to put a layer of nylon mesh (like me) on open backs without any grille structure, this could help. Will create grille variations when i have time. Print with whichever settings, i tried with PLA+ 10% infill and it…
I printed with MK4 and vase mode. Prusament PLA. Designed with Autodesk Fusion 360
My original leather headband broke and i didn't really want to look for a replacement online, so i printed one instead, seems quite comfortable on my head. I made it quite wide to try and minimize the "headphone dent" problem, seems to…
Not as nice looking as the originals that shattered (on there own!) but they work great. Supports: Yes Resolution: 0.2 Infill: 100% Notes: I used supports just for the connecting end but depending on your printer / experience you might…
Case insert for the Hero 9/10/11 that fits a Sennheiser MKE400 II. I printed it in PETG with a 0.6mm nozzle, but would recommend to print with a 0.4mm nozzle. 3 perimeters with 10% infill.
Tangoinnos Fire4000 Rangefinder Lens Protective Cap. This cap is a press fit on the range finder. Cut the magnifier to fit inside the frame. Insert magnifier into frame then insert retaining ring into frame. Place/press complete frame on…
Swift S41-20 addons Base.stl: is a Tray for screws with Magnets 5mm x 1.5mm Stopperr.stl: to Fix the X1 Lens. Gerade ding.stl: to Fix the arm Horizontal. Category: Tools
This bracket allows you to use the power supply out of a Fujitsu Esprimo E400 computer in a case which takes a standard ATX one. Despite its strange dimensions, its outputs conform to the ATX standard. You'll need 7 screws; 4 to mount the…
Lens cover for the x10 lens and the LED lens to keep them dust free when you are not using the Starrett HE400 shadowgraph / optical comparator Print Settings: 0.1/0.2mm Layer Height 2 Wall Thickness 10% Infill
The Linksys SE4008 WRT 8-port Gigabit Switch is designed to stack with Linksys WRT Routers, like WRT1900ACS. Since I replaced my Linksys router with another brand long time a go, I still wanted to be able to stack my new router on top of…
has spots for two 3mm threaded interests for grip but if printed right you dont really need them
This bracket allows you to use the power supply out of a Fujitsu Esprimo E400 computer in a case which takes a standard ATX one. Despite its strange dimensions, its outputs conform to the ATX standard. You'll need 7 screws; 4 to mount the…
Extra parts for this microscope (I don't know I got carried away.) I honestly don't know what to call this, extra parts? If you want to use another soldering iron, you'd have to design it yourself unfortunately :( (just take a picture of…
Rendering 💡 Printing Tips for Carbon Effect Plates I personally printed the "Doro Grill" using a carbon fiber effect build plate. If you are planning to print on a carbon texture plate, I highly recommend the following settings for better…
Lens cover for the x10 lens and the LED lens to keep them dust free when you are not using the Starrett HE400 shadowgraph / optical comparator Print Settings: 0.1/0.2mm Layer Height 2 Wall Thickness 10% Infill
Extra parts for this microscope (I don't know I got carried away.) I honestly don't know what to call this, extra parts? If you want to use another soldering iron, you'd have to design it yourself unfortunately :( (just take a picture of…
