124 modeli
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
This is a simple yet very useful planter pot saucer I designed for use with round planter pots. Initially designed to be less noticeable and prettier than the deep plastic saucers that I can find at the garden store. I have seen other pot…
This organizer shape was designed so the pouch would easily slide in each niche while spreading the contents inside evenly to save space. All the pouches can be seen and easily taken from any angle. Prints with no supports :) As usual,…
This is a snap together, easy to print and customise moveable figure. A lot of time has gone into the design of the snap together joints and print orientation to make these files as easy to customise and print as possible. The goal of…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
I tried printing the original version several times on my Bambu P1S, but one or more legs always failed no matter what I tried. So I split in in two, and it has worked perfectly for me since. Printed in PLA with tree supports. The two…
A simple bracelet design easy to print in a short time and with little amount of material. Ideal as a gadget for a party or as a sign of recognition for team games. Highly customizable using PrusaSlicer modifier meshes, for example by…
Settings for Bambu Studio or Orca Slicer. Print with Bambu AMS and the ability to access different filaments. Sample on one example object with Generic PLA and Generic PETG Print without Prime Tower for save Filament! All settings see…
The original model suggests printing it in TPU. However, if you want to print it in PLA or PTEG, you should visit the original model where you can find a slightly different version that works better with those materials. For the V3…
I made this remix to make the holder dry the desiccant efficently. With a better chance for airflow. No support needed.
Hi I made this case for my Zenfone 9 today . I hope you like it . I added two versions thin one with camera bump and one with thick back (I Printed the back with blocks of no top and bottom layers to get the nice infill pattern) Print in…
This is a remix of Iron_Scorpion's Pistachio bowl jar top that has been modified for easier printing. First picture is after, second picture is before v2 has been scaled up 3% for a better fit Huge thank you to Iron_Scorpion for…
This is a remix of the “Christian Louboutin So Kate 120 High Heel Pump woman shoe” make STL from https://www.thingiverse.com/make:523890 by VDrostock , and the “Chef's Knife” STL. I decided to limit myself to STL editing in PrusaSlicer…
Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans. Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like…
Maturity: Good 3 prototypes. In use since 2024/02. You may add a pad as in my 3mf file to get a better printability. Print without support.
Parametric S1 / S1 Pro (sprite extruder) Dial indicator mount - can be adjusted easily to any printer I wanted a model that can be easily fitted to any printer , and any dial indicator so everything is prameric if you want to adjust it to…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
This model is heavily inspired by the lift-kit of Zakm0n ( https://www.printables.com/model/287928-bambu-x1-lid-lift-kit ). With the AMS on top of the X1, placing and removing only two spacers is more easy. The lid will be at an angle of…
Customizable parametric Swatches Ever wanted some filament sample swatches but couldn't find the sizes you needed? What about labeling them individually? Now you can! How to use the OpenSCAD Desktop app and Customizer Download and open…
I wanted a simple and easily adjustable hook system for the IKEA Skadis pegboard system so I created this minimal model collection. There are several sample hook in the model source file but you can easily modify any of them to your…
Should print with no supports. See remixed changes below.
Die Idee war einen Christbaumschmuck zu entwerfen. Daraus entstanden sind 3 verschieden Weihnachtliche Sterne, die sehr einfach gedruckt und an Ihrer Druckfläche zusammengeklebt werden können. Fügt man Ihnen beim Zusammenkleben noch eine…
Fractions Learning Block Toy - Visualize and Understand Fractions Easily! The Fractions Learning Block Toy is an educational tool designed to help children grasp the concept of fractions through hands-on, visual learning. Each block is…
A simple hexagonal tray, designed around the Mini's build volume and a 200x200mm sheet of stick-on felt. The straightforward shape makes padding the inside easy, though some creativity may be required for marking the lines to cut. It is…
A simple mousepad which can be attached to one of the arms of the IKEA Matchspel gaming chair. I use it when gaming in front of my TV where there's no desk available. The mousepad attachment simply slides over the arm of the chair. It can…
Easily removable retaining ring for 6mm shafts This easily removable retaining ring allows learners using my educational models to easily disassemble and reassemble the mechanisms themselves. I believe that this hands-on experience is…
cable trunking (prints without supports) honestly the best i could make. edit easily even with tinkercad for beginners. just make the walls 1.5mm and base 1mm is enough. I printed on Bambu P1s in Petg as pla is not good for useful items…
Initially I tried criss-crossing patterns but it doesn't grip well, so I made vertical ones. Heights n stuffs should be easily adjustable with CAD softwares.
Recommend printing it at a scale of 101,44%, and perhaps a little less lenght wise.
Three parts to easily vent the base model Adventurer 5M with simple diy parts. The general design here is that most enclosures are leaky, so it's good to ‘vacuum’ the chamber, making all the air leaks flow inward (and not into the room) -…
With this remix, the adapter can be easily removed from the power socket.
Easily customizable in Tinker CAD, prusaslicer or any other CAD software.
Remixed original lid design to clean up model and adjust some of the tolerances, as well as add slots to make them easier to remove. Recommend printing in PETG at a minimum due to proximity to heated bed. Print Settings PETG Layers:…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
When my mom asked: Can you make a 3-piece flower pot set like these? I came up with this design. I used Solidworks as the CAD program and sliced it with Superslicer. Print Settings Printer: LNS3D N200 Rafts: No Supports: No Resolution:…
This is a really cool articulating Minecraft player model. I wanted to use it with my friends Minecraft skin but the original model had a face on it that I didn't want so I made it flat. The face is now flat so that you can put any design…
Ender spool holder now easily horizontally printable for extra strength thanks to a flat bottom. No need for side clips.
I'm renovating a building which has had a small duct high velocity heat pump system installed, and there is no way to shut off some of the vents. I spent a few days making this model so I can easily connect these to the vents and now can…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
Easily Printable 6mm BBs in various sizes Filament Types PETG Variants 25pcs 50pcs 100pcs 150pcs (new) 225pcs (new)
A jaw-shaped bit holder, which can be easily removed from the pegboard to place near the work area Um suporte de bits em formato de mandíbula, que pode ser facilmente removido do pegboard para colocar próximo à área de trabalho
Adapter is not tested, designed using theoretical dimensions, needs testing if fits nicely. Safety cannot be guaranteed! Treat this as last resort option. I recommend to seal with silicone / tape.
Many of the more affordable Kärcher WD vacuum cleaner kits (such as the WD3) come with a relatively short hose of only 2 meters. This can be quite inconvenient when cleaning a larger workshop or when working with power tools and needing…
Longer (+3mm from the original) version for additional spring contact plates. Improved battery mount contacts: example or ozon ip5306: aliexpress or ozon battery: ozon
V9 Entrance is now easier to push in __________________________________________________________________________ Now with Directional Arrow This Model is curved all the way around allowing for easier compression into the spool Step 1 Rip…
Easy to print, easy to edit (FUSION 360) comb for your kids. (both for their hair and hair of their toys) Tested on kids. (prined thick ealled with PLA and it holds well, it is recommended not to force the comb spikes too thin and…
This delightful 3D model is a ladybug-shaped button that adds a touch of whimsy to any project. Despite its multicolour appearance, it can be printed on a single-color filament printer! Here's what makes this ladybug button special:…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t matter as the model is…
I love making my own custom Jibbits! This is a plane base that allows you to easily attach whatever models or designs you want to make your own Jibbitz. Recommended Print Settings: 100% Infill for strength Supports required (depending on…
A simple build plate cleaner ,that is working perfect for things that are not going of. Print with normal settings. I added a small handle, so that it can be peeled off more easily. If u have any questions, ask me: :-)
Use 2 side pieces and 1 center piece as a set to assemble Nintendo Switch stand. The characteristic of this stand: 1.Easily 3d printable (no support is needed) 2.Assemble without tools (snap fit) 3.Thin form, allow to be stored in…
Ruins with high walls for the board game “Clash for Eternia” or easily magnetized walls: I have used the slicer to cut the walls above the first row of stones and added circle shaped connectors. With adjusting the dowels it can easily be…
A cool design for a trophy. Easy to print and a good beginner model. PLA or PETG recommended. No supports required. Can be easily customized by simple adding the desired text to the base.
I love the simple and effective funnel design Peter H came up with here , and I wanted a version without a hanging tab that I could use for warm transfers, so I played around until I got a design I liked that printed well in high temp…
Easily printable painters palette (no support etc required). Scalable to fit all hands and needs and one version for right hands (for left hand painters). Step files for modification included. The knives on the picture are the really…
A simple basic module for building your own antenna. This base part of the antenna is designed to fit a commonly available water pipe with a diameter of 20 mm. There are two versions. one is designed for self-tapping screws and the other…
Narrower version of the original easy to open lid for the under the bed storage for the Prusa MK 3.5. Should also work for the MK 3.9 and MK 4.0. Fits the model:…
Trying to find an easy way to make arcs and rings in OpenSCAD without subtracting shapes but thru math. You can choose the origin of the arc, radius of the arc, arc angle, arc thickness, and where on the radius the arc starts. If you make…
This easily removable wall mount can be used for both the : I used PETG for this. sonoff zigbee 3.0 usb dongle plus or the RTL-SDR Blog V4 (maybe not copies - original tested) The wall part is screwed where needed and the Holder itself…
Custom Ducting with Scrap Duct Work with F3D (so you can easily customize to fit your needs) The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it…
need to add two more for a trumpeter 1/32 crusader f-8 Marines could not find any twin any were so designed my own
Duct Booster with F3D (so you can easily customize to fit your duct) Works with 420CFM 8 inch Inline Grow Fan:…
I used the beautiful birth control pill box model by Skipperino, and made it fit for the brand of my gf. I also added the heart, I used the simple 3D heart model by Best_codes. The original was suitable for pill blisters with a width of…
A simple, easy to print turntable for painting. Does not require bearings and rotates easily. Rotating table
Trying to find an easy way to make 3 point Bezier arcs in OpenSCAD without subtracting shapes but thru math. You can choose various parameters of the arcs. Category: Math
A good filament sample should provide more information than just the manufacturer and the type of the filament. Data such as printing temperature, printing speed, etc., are also essential. Using a mobile phone and a free app, it’s easy to…
robust cablemount for stiff cables or AC power cables, but easily editable model, using countersunk head screw, printing from PETG, simple, durable gcode is for 6x6 (used i.e. for flexo power cable for various hausehold machinery or AV…
Description It's nothing special, just a simple and basic bookmark that's easy to customize. Made using OnShape. Just some basic ideas for customization: Adding some text on top of the bookmark Adding your logo to the top of the bookmark…
Simple parametric dragchain mount i needed . Added step and fusion file
Printed on Bambu Labs X1C with AMS. Printed face down. Download and open the 3mf file directly in Bambu Studio for best results.
Cable holder for IKEA BEKANT table where only the cable holder is visible from above and no glue or penetrating screws are involved. Not perfect, but works. Print Settings Printer: Bambulabs A1 mini Rafts: No Supports: Yes Resolution: 0.2…
I made a compact ultralight slip case to protect my new DJI Mini 3 drone and RC-N1 flight controller when motorcycle camping. It's as small and lightweight as I could make it. Each of the overlapping side walls are 1.5 mm thick, so the…
The Angler: Custom Triangle & Corner Generator (OpenSCAD) Description: Meet "The Angler" – your new favorite OpenSCAD tool for crafting custom angled pieces and robust triangular structures! This highly flexible design empowers you to…
Storage Drawer (Fits Ender 3 Pro and F3D included to easily modify) The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:…
Trying to find an easy way to make Elliptical, Parabolic and Hyperbolic 2D arcs in OpenSCAD without subtracting shapes but thru math. You can choose various parameters of the arcs. ** Updated 11Sep2024 Code draws arc more efficiently and…
Download this flat gasket / washer in STL format. The part features an inner diameter of ⌀60 mm , an outer diameter of ⌀80 mm , and a thickness of 8 mm . Fillets of 4 mm are applied to both the inner and outer diameters. You can generate…
**🇬🇧 🇺🇸 English** ClicDôme is a geodesic dome system whose connectors are 3D printed. These connectors are equipped with pins. They allow the cleats to be snapped into place one by one. A simple pull on the pin releases the cleat. This…
Place 2 modifiers like in the photo on the screw holder pillars and add a 100% fill, no support and first color change at the end of the first layer. The gcode file present in the download performs 2 filament changes and is set with IS…
TESTED FOR BIALETTI BRIKKA 2, BIALETTI EXPRESS 2, and one unbranded 2 CUP MOKA. A tamper (smooth and with rings), gasket holder and funnel for a moka 2‑cup basket. It is designed in a way that makes it easily scalable to any aluminum…
This is an openscad design with all parameters at the top and labeled and commented. My goal was to make it easy for you to borrow and use this design. I use an anycubic kobra 2, i.e. one color at a time, so I designed the text to sit on…
USE AT OWN RISK! Current Version PRE-BETA 0.213 All good! This is a total remake of my original versions. This time I made them in FreeCAD using a spreadsheet to control all aspects of the design for an easy and quick way to make changes.…
A robust, easily scalable diagnostic and calibration tool for laser engravers, allowing the tuning of various actions. Includes beam diameter calibrator tool, motion accuracy testing, and multiple tools for focus and scattering…
here's a 4 column version for the kids so they can focus on just the place values used for abacus mind math. I'm using it with these books https://www.amazon.com/dp/1941589049?ref_=ppx_hzsearch_a_conn_dt_b_pd_6 the large round feet work…
Wall bracket Intel NUC Case (for T-5)--easily removable - just lifts off bracket basic dimensions off the NUC - 12cm * 12 cm * 2.5cm Designed to have bottom of case facing out to allow ventilation. Side vents also clear as are the main…
Alternative extruder top cover with screw in 4mm PTFE tube holder. Includes small plate to hold and a hexagonal shape.
/////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////
Motivation Snap based 1x1 example mount provided organizers requires some force to insert and remove. That is fine for decorative pieces or cable guides that you don't want to move too often, not so much for something like board game…
3TESTED FOR BIALETTI BRIKKA 2, BIALETTI EXPRESS 2, and one unbranded 2 CUP MOKA. A funnel for a moka 2‑cup basket. It is designed in a way that makes it easily scalable to any aluminum basket size, just by measuring your basket diameter…
Hi Alfred Bolognese here, are you tired of drawing your favourite furry character late at night and every 15 seconds you have to look up from your screen because the eraser button on your thinkpad pen is stupidly small and offers no…
Scripted - ping me for specific geometry. Original design for XRAY M18T. Primarily designed for foaming filament, tested on Siraya AIR TPU: enforce constant speed across the print via volumetric flow rate limit e.g. 3 mm³/s. Friction in…
Now you can easily design, build & decorate your own Christmas tree in a variety of colors by using a selection of tree trunks, branches and decorations. You can also add your own decorations for a more personalized look. Endless design…
The Milk container key coming with the device seems to be something usable in a restaurant, etc. - but for home you want to have something which can stay in there, looks nice and is easy to operate. This is the second version of the key,…
this model was made for the sole purpose of the printed fabric competition.
Just keep in mind that the pin is fragile, ensure good layer adhesion. When installing , gently push the cover into the anchor. If removal is needed, unscrew it carefully while pulling lightly to avoid breaking the pin. Freecad model…
I needed an additional coffee measure for my de-caffeinated container so I designed one. I printed in PETG but PLA should work fine. The part has a 45 degree chamfer on the base which does not need supports but the handle does need them.…
Standard rivet pins are flush with the surface. I designed pins with a space between surface and pin top, which allows them to be easily removed. Print settings: Printer: Core One+ Filament: Prusa PETG Galaxy Black, using the standard…
The perfect sign for when you need to indicate how easily one is "startled".
Cat Gate, Dog Gate, Pet Gate non-marring**, reversible installation and/or easily removable* Easily removable pet gate for hallways or stairs, stops animals going places you don't want them to go. Attaches to walls using non-marring,…
![[ClicDôme] A solution for easily removable 3v dome](https://media.printables.com/media/prints/2f13f59a-1029-4104-b81c-65a345852006/images/11242766_2faf163d-7b6f-418e-91a7-b75487a60023_e6ca42ed-bcbc-45db-a80b-68473a6bc400/visuel_dome_petit.png)
![Subwoofer - Bassreflex - Plug [easily scaleable]](https://media.printables.com/media/prints/224720/images/2052871_234c8702-de51-4fa1-8203-b50575891139/20220612_180026-crop.jpg)
