P
PrintablesPejpek
Řemdich
jsou potřeba dvě části vrstva-0,20mm
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
Wyniki wyszukiwania: emd
38 modeli
P
PrintablesDaniel Norée (Barspin)
OpenRailway EMD SW1500 1:32 Locomotive
The EMD SW 1500 is a American diesel switcher locomotive made by General Motors' Electro-Motive Division during the 60's and 70's. Some 800 were made and there are several still in serivce in the United States. This 1:32 scale version of…
- Pobrania
- 1456
- Polubienia
- 182
- Ocena
- 5
P
Printablesbonzai000
N scale Aurora postage stamp train shell EMD F7
This is an N scale loco shell. I played with this 1968 CP version when I was a kid and modeled the shell as practice in fusion360. In N scale it is only resin printable, but if you scale it up should be a decent HO model. It's neither a…
- Pobrania
- 423
- Polubienia
- 30
- Ocena
- 5
P
PrintablesBeusekomse Baan
Deutsche Reichsbahn / Deutsche Bundesbahn K06 Klappdeckelwagen "Wuppertal"/"Sachsen" - GEREMD - Gauge 1 (1:32)
After finalizing the simplest version, without brakes ( https://www.printables.com/model/423881-deutsche-reichsbahn-deutsche-bundesbahn-k06-klappd ), it took little effort to create this version with a “brakemen's shelter”. All items that…
- Pobrania
- 400
- Polubienia
- 21
- Ocena
- 5
P
PrintablesRoger
1:29 scale SP Configuration Motorized OpenRailway EMD SW 1500 G Scale Locomotive
I am preparing to design and build a Krauss-Maffei locomotive, so I wanted to practice 3-D printing an entire locomotive. I used Daniel Noree's base design for the OpenRailway EMD SW 1500 and printed a 1:32 version of it that incorporated…
- Pobrania
- 337
- Polubienia
- 56
- Ocena
- 5
P
PrintablesManimal
Aristocraft replacement fans for EMD GP40 SD45 - 1:29 Scale
Replacement fans for radiator and dynamic brake for Aristocraft GP40 and SD45 locomotives. May fit others as well. The one indicated by the arrows are printed - others are factory.
- Pobrania
- 200
- Polubienia
- 10
- Ocena
- 5
P
PrintablesManimal
USA Trains EMD NW2 Bell
More modern style "trapezoid" bell replacement for the stock Howard bell. Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal Rafts: No Supports: No Resolution: .1
- Pobrania
- 193
- Polubienia
- 19
- Ocena
- 5
P
PrintablesAisane
N Scale EMD E3/E6 Unit
This is a model of a EMD E-Series Passenger Locomotive. Parts of the locomotive are taken from the thingiverse models: https://www.thingiverse.com/thing:4796985 and https://www.thingiverse.com/thing:5602947. The trucks and underbody…
- Pobrania
- 172
- Polubienia
- 18
- Ocena
- 0
P
PrintablesManimal
USA Trains EMD NW2 Pilot plate and Plow
Blank Pilot and Plow pilot for USA Trains EMD SW2. Versions for Large scale and #1 couplers. Print Settings Rafts: No Supports: Yes Resolution: .1 Infill: 100
- Pobrania
- 166
- Polubienia
- 13
- Ocena
- 0
P
PrintablesRoger
1:29 Scale Southern Pacific EMD SD9 G Scale Locomotive
THERE IS MORE TO COME - photos and instructions. NOTE: I accidentally included some redundant files: "Body A", "Body B" and "Body C" are identical to "Long Hood Section A", "Long Hood Section B" and "Long Hood Section C". All I did was…
- Pobrania
- 162
- Polubienia
- 23
- Ocena
- 0
P
PrintablesManimal
EMD Flexicoil sideframes for USA Trains NW2/S4 motor blocks
To simulate EMD Flexicoil 2 axle trucks. These are not sprung. The springs are printed for a more prototypical look. I highly recommend getting them printed in MJF Nylon 12 for greater durability. I use JawsTec https://www.jawstec.com/
- Pobrania
- 144
- Polubienia
- 15
- Ocena
- 0
P
PrintablesManimal
USA Trains EMD NW2 roof mounted Air Reservoirs
Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive. The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and…
- Pobrania
- 105
- Polubienia
- 9
- Ocena
- 0
P
PrintablesASKA Modelle
New Haven EMD F7 O Gauge Remote Control Model
🚆 EMD F7 – 3D-Printable O Gauge Locomotive Bring the legendary EMD F7 to life with this 3D-printable O Gauge model ! Designed for smooth operation and easy assembly, this locomotive is perfect for model railroad enthusiasts who want a…
- Pobrania
- 76
- Polubienia
- 9
- Ocena
- 0
P
PrintablesManimal
USA Trains EMD NW2 Lights and Numberboards
More parts to make an NW2 look more SW. Multiple parts to facilitate smoothing the print lines by painting/sanding. Lights are sized for 3mm LED. Notes: My print bed is PEI so anything I print face down (like the marker blanks) will have…
- Pobrania
- 75
- Polubienia
- 7
- Ocena
- 0
P
PrintablesASKA Modelle
EMD F7 A Unit
This is a 3d printable model of the EMD F7 A Unit. The model is made in 1:48 scale (O-Gauge). The construction manual contains now the information for building the mechanics and also the electronics (English dated version of the…
- Pobrania
- 75
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSLICEWORX
FixemDude Swirly Shamrock Remix for 6x3 Magnets
We remixed the FixemDude Swirly Shamrock to make it a Fridge Magnet. Needs 6mmx3mm circular rare earth magnets. All rights owned on the design by Fixemdude. Please post your makes on the original design page here…
- Pobrania
- 66
- Polubienia
- 10
- Ocena
- 0
P
PrintablesManimal
USA Trains EMD NW2 Fuel Tank
Upgraded my USA Trains NW2 with a larger fuel tank. Direct replacement for stock one. No cutting required. Added version for Visiton FRS 7 speaker facing up into the hood (my preferred install) Print Settings Printer Brand: Printrbot…
- Pobrania
- 64
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTroy
HO Scale DCC Cover EMD GP38
This is a HO Scale cover for the DCC access hole. this variant is for an EMD GP38-2 with and without dynamic brakes Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Post-Printing Maybe a little sanding…
- Pobrania
- 61
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGST
Kettenhemd gegen Dornen für Fahrradreifen der Größe 64mm Breite.
“Kettenhemd” zur Verteidigung des Fahrradschlauches gegen Brombeerdornen. Designed für die Breite 26cm, Montainbike. Zum einlegen zwischen Schlauch und Reifen, - ich hoffe meine Platten sind dann seltener!
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSouthern630Stan
EMD Model 40/ Skrunkly Scrimbo
The EMD Model 40 was a two-axle diesel-electric locomotive built by Electro-Motive Corporation (EMC), and its corporate successor, General Motors ' Electro-Motive Division (EMD) between August 1940 and April 1943. Nicknamed "critters" ,…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesS. Thanawat
Petsfang Direct with Bondtech BMG for Emder5 left BLT
This is modded version of Petsfang Bowden Direct with Bondtech BMG for Ender 5. Left mount BLtouch. I cannot use my stock Dual extruder's screws on the original base, so I added more ticker at motor mount so I can use M3 40 mm screws I…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
Printablesjergens
Nesting memdex display stand and organizer
Redesigned and improved version here: https://www.printables.com/model/383979-better-nesting-memdex-display-and-storage-stand This is a stand for memorydex cards. My spouse makes these artsy cards in a format called memorydex, a riff on…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
Printablesjergens
Better nesting memdex display and storage stand
This is a redesign of my stand for memorydex card display and storage. It keeps the ability to nest multiple stands together for storing cards, but is easier to use, stronger, and easier to print. Changes Handles extra large, top heavy…
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChristoph Baake
Cointrap/Fremdkörper Falle
Wenns am samstag kaputt geht einfach dieses Teil in PETG drucken und mit der alten Dichtung versehen. Dieses Modell mit 100% infill seitlich liegend mit supports hat 4 Jahre in Situ gehalten. Viel erfolg.
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printableswillow2x
130mm OtemDrum Panel
This is a panel designed for Otem Relliks TeensyDrum module. Category: Hobby
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBernhard
Knopf für Hemden shirt button
bunte Knöpfe zur farblichen Selbstgestaltung. CAD: Tinkercad Slice: Prusa für MK 4 mit MMU Die Farben werden im Slicer vorgegeben
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNERDCORNER
Egg Cup Emden
How to construct an egg cup and design it in a CAD you can see on https://nerd-corner.com/solidworks-tutorial-egg-cup-with-solidworks-revolved-boss-base-and-fillet-feature/ or https://www.youtube.com/watch?v=lHXmrre8l_k
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesrhaen
Olymp Shirt Booster / Hemdkragenverstärker
This printed part is a shirt collar stiffener used in the business shirts of Olymp’s Signature line. If it gets lost, the collar will not keep its shape properly and tends to fold or wrinkle.This printed part is a shirt collar stiffener…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesQuantumForge
GemDisk Starter Pack
HEEEYYY, ITS QUANTUMFORGE I decided to do something a bit new: A toy that also functions as a fashion accessory. Sorry about the crappy pictures. About GemDisks: I wanted to make something that you could play with, but also have a…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printableselatobi
Emdcap for Kovalex aluminum profile
Simple endcap for the Kovalex aluminium profiles for WPC terrace floor. Printed with PETG @ 0,2mm layer hight with 20% infill.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printablescino
Linux Dice | systemd-free version.
probably a good idea to use 0.8 layer height btw oh also i screwed up the geometry so use "repair model" option in orca if walls disappear use arachne wall generator it looks much better irl i promise i just cant take a picture because my…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 5
P
Printables
EMD F7 in Union Pacific Paintscheme
🏛 Historic Background The EMD F7 was a 1,500 HP diesel-electric locomotive built between 1949 and 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel . Originally designed for freight service, the F7 also…
P
Printables
Emdcap for Kovalex aluminum profile
Simple endcap for the Kovalex aluminium profiles for WPC terrace floor. Printed with PETG @ 0,2mm layer hight with 20% infill.
P
Printables
1:29 Scale Southern Pacific EMD SD9 G Scale Locomotive
THERE IS MORE TO COME - photos and instructions. NOTE: I accidentally included some redundant files: "Body A", "Body B" and "Body C" are identical to "Long Hood Section A", "Long Hood Section B" and "Long Hood Section C". All I did was…
P
PrintablesASKA Modelle
Amtrak EMD AEM-7 0 Gauge modelkit
3D Printable O Gauge Model Kit — EMD AEM-7 The EMD AEM-7 is one of the most iconic electric locomotives in North American railroading history. Developed in the late 1970s, it was derived from the Swedish SJ Rc4 design and built by…
- Polubienia
- 4
- Ocena
- 0
P
Printableshgross
Emden, Germany - 3D Miniature
3D printable topographic miniature of Emden - 🇩🇪 Germany Capture the beauty of Emden 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 53.367, 7.207 (LatLng) . It is…
- Polubienia
- 0
- Ocena
- 0
P
Printables
EMD F7 in Union Pacific Paintscheme
🏛 Historic Background The EMD F7 was a 1,500 HP diesel-electric locomotive built between 1949 and 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel . Originally designed for freight service, the F7 also…
