Liczymy pasujące modele…
The Britons castle age town center from AoE 2. The original sprite doesn't show the entire story in terms of first ground props, so I've partially gone by the sprite, and partially positioned them to make everything connected together.…
The Teuton castle from age of empires 2, Needs a slight bit of supports for the drawbridge but is fairly easy to remove and comes out really really well. This has proved very popular on the other places I've made this model available.…
This is a remix of a model found online. I have fixed the model and can be printed without any issues and even support.
Simple repair of the original file that had problems with the pedestals under the lions.
A model of a trebuchet from Age of Empires 2. Category: Video Games
组装起来有点复杂，尤其是齿轮。其他一切都非常容易打印。建议使用PLA大理石和PLA木材以获得更好的打印效果 风车叶片和闸门是可移动的
This is a house from the game Age of Empires II . I printed it on a A1 mini with a 0.1 mm layer height using PLA+ . It does not require supports, but it is recommended to reduce the bridge speed in the slicer for better results.
I made the original Age of Empires II logo to be printed in 3D. You can have it as a desktop decoration. You can also print the support that comes with the model for it to stay at an angle. Enjoy :)
My take on the Archery Range from Age of Empires 2. Fixed Version available https://www.thingiverse.com/thing:3400998 By https://www.thingiverse.com/TheOrdner/about Category: Video Games
Closed in the top floor and added cannons. When printing, make sure to include supports under the cannons and a brim at the base to keep it stuck down on the plate. I uploaded my .gcode version at 0.05mm Ultradetail with supports as…
These models are unofficial tokens and paraphernalia for Mega Empires, East and West versions. Most of the city tokens and ships are based either on historical or real buildings and ships, a few are interpretations of drawings or…
Do you need somewhere to keep change, knick-knacks, or is your population cap to small? Whatever you storage problem is, it could be solved with this Age of Empires Greek house shaped box! Dimensions: Width: 3.94in (10cm) Depth: 3.62in…
Warning: You’re being attacked by Henry the Lion!!! First of all, don't get intimidated by the height of the model or the various colours. Although being close to 40 cm from ground to pinacle it is modelled in smaller pieces and…
This is an organizer for the board game Empires of the Void 2. It supports sleeved cards, vertical storage and is designed to drastically decrease setup time. Here's what you need to print: 9x Planets - One box for each set of planet…
Hi, I designed this insert mainly for Space Empires 4x expansion Replicators to keep terrain hexes and sleeved cards also from Close Encounters. I printed it in draft presets, means 0.3mm layer, nozzle 0.4mm. Insert bottom thickness is…
I made the original Age of Empires logo to be printed in 3D. You can have it as a desktop decoration. You can also print the support that comes with the model for it to stay at an angle. Enjoy :)
THE AGE OF EMPIRES II TOWN CENTER ..is finally on Thingiverse! After a quick search, I found that AOE architectural models were not readily available online. Age of Empires was a classic computer game back in my childhood and I was a big…
🌟 Discover the Lumber Camp from Age of Empires 4 (AoE4). A design split in 6 pieces, each reflecting the essence of medieval craftsmanship. The Perfect Decorative Piece for Your Desk or Office Space. What's Included: 🪓 1 Design split into…
This is a house from the game Age of Empires II . I printed it on the A1 mini using PLA+ with a 0.1 mm layer height . I also reduced the bridge speed and increased overhang cooling. If you set the layer height above 0.1 mm, some details…
This is a farm from the game Age of Empires II . I printed it on a A1 mini with a 0.1 mm layer height using PLA+ . The model does not require supports if the bridge speed is set to 10 and the cooling overhang threshold is set to 95% in…
This is a simplified version of the Siege workshop from age of empires 2. The building comes out well, though you will need supports for some of the overhangs Category: Video Games
I made the original Age of Empires III logo to be printed in 3D. You can have it as a desktop decoration. You can also print the support that comes with the model for it to stay at an angle. Enjoy :)
This is an organizer for the board game(s) Western Empires that also works for Eastern Empires. The special buildings expansion(s) fit as well. It does NOT support sleeved cards but horizontal storage is no problem. The small cards just…
Scale it down to 75% for best result
A keychain inspired by the Georgian civilization’s flag from Age of Empires II. Printed at 0.1 mm layer height on an A1 mini. Designed to be printed without supports or AMS.
This is a flag from the game Age of Empires II . I printed it on the A1 mini using PLA+ with a 0.1 mm layer height , without using AMS . If you increase the layer height, some parts may not fit together properly.
I printed it on the A1 Mini using PLA+ at 0.1 mm layer height, with ironing enabled. It was printed using AMS.
This is a keychain of the Roman civilization’s flag from the game Age of Empires II. I printed it on the A1 mini at a 0.1 mm layer height , without using AMS .
For the lid you can print the first layer in black and then three layers of white, and the rest in black to get the same effect that I have. There are inserts for the cards, with both a left aligned and right aligned option.
Small organizer. The base plate isn't actually necessary. Fits sleeved cards and allows the lid to close flush.
MYLE made an excellent organizer for Monumental, found here: Sadly I threw away my Lost Kingdoms box years ago before having a 3d Printer. I wanted a version of their Civilization Chest that could fit inside the African Empire box and…
A keychain inspired by the Georgian civilization’s flag from Age of Empires II. Printed at 0.1 mm layer height on an A1 mini. Designed to be printed without supports or AMS.
These models are unofficial tokens and paraphernalia for Mega Empires, East and West versions. Most of the city tokens and ships are based either on historical or real buildings and ships, a few are interpretations of drawings or…
A HueForge of a fan-man poster for The Empires Strikes Back
I printed it on the A1 Mini using PLA+ at 0.1 mm layer height , with ironing enabled . It was printed using AMS .
Print 6 of the Ambassador holders and lids Print 6 of the Leader holders and lids Print 1 of everything else. No supports needed. I like 15% infill to keep things light.
The tokens in Portal Games' "Empires of the North" have slight differences from "Imperial Settlers", so here are two remixes of Kandyhouse's original files [apples and coins] and a new Raze token. The remix of the apple was only to add a…
Tray for Space Empires 4X chits (including Close encounters expansion) Inspired by thingiverse model from bigbc79, reorganized positions and added bottom chit slip blockers. Text are part of 3mf to easily organize tokens
This is a rondel holder to keep the action tiles in Imperial Settlers: Empires of the North from sliding apart. Category: Toy & Game Accessories
I made the original Age of Empires IV logo to be printed in 3D. You can have it as a desktop decoration. You can also print the support that comes with the model for it to stay at an angle. Enjoy :)
Designed to keep your chits organized. One for each faction.
