7734 modeli
Made this stencil to create a checklist on a post-it (or sticky) note pad. The stencil surrounds the notepad to prevent it from sliding around, and can also be used as a base to go underneath for safe keeping.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Hello, Recently had to make some marking on print sheets for easier identification and printed what's available on Printables after all most solutions are a search away. After using the stencil had some ideal implementations of my own and…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Do you want a Bambu lab x1 Carbon with ams or just another 3d printer? Print this for your girlfriend or wife for valentine and let them see what you can do with an extra 3d printer. Since I don’t have a girlfriend neither a wife I just…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
IF YOU DOWNLOADED BEFORE 2245 CST 10/27/2018 PLEASE UPDATE FROM CURRENT There was a problem with the Top.stl where the changes I made the the magnet recesses in the sketch did not get transferred over to that form, so there is an error…
Wydruk około 12,63 €–15,43 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
I wanted to make a Thwomp pencil holder for a gift and while there were existing models available, I wanted to design it myself. I'm really pleased with the results! Print instructions I used Paramount3D Gray for the base, Solutech Merlot…
Wydruk około 3,81 €–4,65 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Stencil of a Rose. Uses art from PublicDomainVectors.org .
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
A full set of letters, numbers, and common symbols in the form of quickly printable stencils, which have been carefully proportioned for easy typographic layout (i.e. each letter's stencil has a unique width/aspect ratio so that they can…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
For those who have a passion for art and design, I bring you this exquisite set of 18 colored pencils, nestled within a beautifully crafted pencil holder. This unique piece not only serves as a functional tool but also as a captivating…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
I'm building on my nut & bolt pencil organizer by making a version that's all nuts. It's also fully compatible with that organizer (see the third picture): an M80 screw size, with 0.5 mm tolerances. Interior dimensions: 75mm (diameter) x…
Wydruk około 15,51 €–18,95 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Cristiano Ronaldo Template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Put this stencil on your golf balls, and spray paint or marker mark your golfball for recognition from among the other balls. I have included all Letters from A-Z that you can simply print the Letter you want for your Ball.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Simple model of EVE, easy to print. No supports. For the thread to work well, must be printed at 0.20mm height. Other parts of the body do not require anything special. Can be increased or decreased by percentage. Printer setup: Nozzle…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This PokéBall-inspired pencil holder is split into separate parts for easy multi-color printing. The button is printed as a standalone piece and should be glued on after printing. The model is designed for three-color printing — either by…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
It’s 1 mm high with additional 0,4mm for the text. You can easily change colours between layers for 2-colour effect. Scale it up as you need on axis X and Y (I don’t recommend scaling down).
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Template with a peony motif. Can be used for pencil drawing, airbrush or sponge powder paint. The pattern is suitable for wall, greeting cards, textiles and other decorations. Printing from PLA, without supports, layer height 0.2 mm.…
Wydruk około 4,90 €–5,99 € nettoWstępna wycena jednego wariantu
I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Here is a pencil pot I designed in Fusion 360. It has 7 holes which neatly organise your equipment and stationary. Enjoy! If you are interested in finding out about the other 3D Printing related activities I do please visit my website…
Wydruk około 14,08 €–17,21 € nettoWstępna wycena jednego wariantu
Somewhere to put your stylus when you want to do something else. Slim and minimalist design fits easily on desks. Especially useful for me during math class when I pick up and put down my stylus a lot, as we use OneNote to keep track of…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Basmalah / Besmele Stencil - Islamic Calligraphy Art Suitable for artistic calligraphy and artistic spray work. I designed it for my mother, who is a wood burning artist. I look forward to your support (download) -- Dimensions -- Length :…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
Özel bir hat sanatı yazısı ile bismillahirrahmanirrahim (Rahman ve Rahim olan Allah'ın adıyla başlarım) yazısını sizin için stencil haline getirdim. İnşallah işinize yarar. Yorumlarınıza göre geliştirebilirim
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
A stencil for drawing letters in standard galactic alphabet. Used in Commander Keen or Minecraft. Unfortunately I had no Prusament galaxy black, thus I printed it with white PETG. If you want to have bigger or smaller letters, or wish to…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
be careful when peeling it off after printing. It is made thin to maintain flexibility adaptable to different supports
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Overview RangeVault FieldMark Field Journal Stencil Mark the Moment. Plan the Next. If you carry a field journal and actually use it—at work, in the shop, or out in the world—FieldMark helps keep notes clear, consistent, and easy to…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
All credit reserved to @axelollars for the amazing 3D model I adapt this model by substracting some matter to make it stand by itself and hold some pencil. It make a great pencil holder for my work desk.
Wydruk około 6,34 €–7,75 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
Mit dieser Schablone kann man sich einfach seine Lieblingsblumen zusammen malen
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Stencil, wall art: Ballet dancer Very simple.
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
be careful when peeling it off after printing. It is made thin to maintain flexibility adaptable to different supports
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Introduction: This case features a flexible lid and base that allow for quick pull-to-open and push-to-close use, while full-length threads keep the lid securely in place. The threaded design also allows you to adjust the length to fit…
Wydruk około 8,51 €–10,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
GF: “I need you to make me a Quilling tool - do you have any small wooden dowels?” Me: @#% is a Quilling Tool?" Well, it's for making paper flowers. So I designed and made this version. It pops on the top of a pencil. There's two…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Simple Hexagon Pencil Holder/ Gadget Organizer
Wydruk około 7,89 €–9,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Scale up or down as you like in slicer.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stencil, wall art: Ballet dancer Very simple
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Add the fly swat to the end of your pencil and bat away those pesky flies. will need supports (touching plate) 0.2mm, 20% Infil, no adhesion.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Stencil, wall art: Bumble-bee (one colour, two colours)
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05-0,07mm layerheight, 4 perimeters, 100% infill. print max 3-4 layers.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Checklist Stencil Circle & Square
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There is marks on the inside to align the top ring and the container. The mark on the container is more like a miniature dot (sorry). P. S. Don’t for get the ❤️ pls… 😊
Wydruk około 2,52 €–3,09 € nettoWstępna wycena jednego wariantu
Box Note 77mm Circle & Square post it note sticky notes cube 76x76mm
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My wife and I really like the mod style cases that Mattel created in 2010 for games like uno, apples to apples, skip bo and other games. I created some 3d printable card cases inspired by that design. Now for the back to school contest,…
Wydruk około 7,08 €–8,65 € nettoWstępna wycena jednego wariantu
Kylo Ren Pencil Lightsaber. need stubby pencils with no erasers for side slots. main center slot worked best, nice and snug, with the erasure on.
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
Blank stencil for custom text! You can use PrusaSlicer 2.6.0 feature to add your own text - I was missing the blank stencil, I created it to match with stencils I have already printed. Just edit the text, which have I already added. Don't…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The design fits most of the pencils that I was able to measure, but I've also uploaded the parametric FreeCAD file in case you need to make adjustments to the dimensions. I recommend printing with a small brim to increase bed adhesion, as…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Holder for long (new) pencils 40x20x70mm short pencils 40x20x40mm needle files 45x12x70mm
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
Simple stencil best used with a brush. Thick enough for easy handling. Triangular projections are to help with orientation. Usage: For best results, use the points to help orient the stencil, then secure with painters tape. Use a paint…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A super small and thin stencil that makes tidy and clean dungeon maps super easy to create. If you found this useful, it would bring me great joy to see your work - so be sure to share. :) Or, just buy me a coffee:…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Ruler with foldout stencils for kids. Printing Needed: 1x Top 1x Connector 1x one of the Bottoms Note: Can be printed without supports. Assembly Push the Connector through the front face of the “Top” part. Then push the Bottom part over…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I draw. A lot. You can see my art on Instagram: @matthewjschultz or on my website: https://mjs.art As part of my artistic process, I create custom drawing stencils. I design them for my use, but I've received a lot of interest, so I'm…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Organizador Lapices (pencils organizer)
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Stencil: Dragonfly
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Calendar stencil for notebooks or paper!
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
A small square that fits in small pencil cases. With it, you can measure distances and angles, but also trace parallel and vertical lines. Bonus: Simple Normal Parabola Stencil Dimension square: 2,2*60*118mm Dimension Parabola:…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
nástěnný držák na tužky
Wydruk około 8,67 €–10,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a grommet pencil cup for a desk top. It fits 80mm / 3.15" grommets The total diameter (with the lip on which it rests) is 90mm It is 90mm deep from the underlip to the bottom. Printed at 0.2mm layer height & 15% infill using PETG.
Wydruk około 6,00 €–7,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A clip that attaches to a standard hardhat that holds a #2 pencil
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Some skill is needed to use it, but it's definitely possible. All parts were printed with PLA at 0,2mm layer height and 3 perimeters. No supports needed. Designed to be tight fit so it won't wobble. There are optional lenghts of joints…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Hi, this is my first model ever, I'm new in this 3d printing world and learning about tools and tricks. The Idea in this pencil holder is to achieve some sort of fabric texture, in order to do that I played removing perimeters and using…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
Use double-sided tape to stick it to a wall or fridge. It is easy to print without supports and can be used in many ways. Der halter kann mit doppelseitigem Klebeband an einer Wand oder einem Kühlscchrank befestigt werden. Er ist einfach…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Visit my Thangs.com: https://thangs.com/designer/3D%20PrintableArts
Wydruk około 5,66 €–6,92 € nettoWstępna wycena jednego wariantu
Print Core ONE PLA 15% Gyroid 0,20 Blanced
Wydruk około 7,87 €–9,61 € nettoWstępna wycena jednego wariantu
Rainbow crayons and pencils organizer for kids
Wydruk około 9,12 €–11,15 € nettoWstępna wycena jednego wariantu
I builded a pencil cup with a lockable tip for the Kids It's 141 mm high, and 65 mm in diameter. I had the idea myself, however I saw that @Markus_317812 had already uploaded a similar model. Is only fair, then, if I mention him. Besides…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Lots of different shapes! Hold the outside of the stencil and draw a shape inside, or hold the inside of the shape and draw a larger shape on the outside. I've made a box of shapes as a classroom pack, so there are four of each shape. You…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena jednego wariantu
