Liczymy pasujące modele…
This mod is for Nintendo switch FixtureS1 model, allowing mounting Nintendo switch 2. My best print results have been laying down, clip mounts floating, and using minimal supports (PrusaSlicer Auto supports).
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
UPDATE 24/01/2026 Created an high capacity vane bit-holder as someone suggested with or without magnets from Alvomane design and a larger vane and vane-lid. 18/08/2025 I fixed in Fusion 360 the small gap that was left from the tolerance…
I want to make a case for my miniware ES15 i came with this simple design with minimum hardwares and its can be printed with 180mm bed. there is alot of options there ! but i have 3d printer to make it and same time to be stackable with…
A ruggedized box for the ES15 screwdriver meant for inserts made by 51M0 . This remix was requested for by another user. The box's interior dimensions are the same as the insert but with a +0.2mm tolerance. Latches and hinges are made to…
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
A remix of the #Gridfinity Ifixit screwdriver/bit tray because you don't have the exact same twisty deal as that guy from the video.…
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
This model includes the sliding lid. Having printed the original user's model at 115%, I've found that at 115% it's only just big enough for my Moondrop SSP IEMs with the stock cable. As such I scaled the model up to 140%. When you slice…
Pièce pour agrafeuse Rocafix ES130/ Part for stapler Rocafix ES130 Category: Replacement Parts
While technically a remix I've re-made the holder from Zach's original template using MachoThick's ES15 model and bit holder design. I've added the iFixit screwdriver sketch from Zach's own models. This will fit standard 4mm bits like the…
I printed it with PETG but PLA should also be fine. Support is required for the top cover. If you found it useful you can Buy me a Coffee!
Been thinking of making a handle for this driver, so I built a model of the screwdriver. Pretty accurate, but couldn't figure a good way to finish the button, so it's been left flat.
Recently I bought a Miniware ES15 electric screwdriver and decided it'd be really convenient to carry it around with my iFixit manta set because they use the same size bits. I really like the case the iFixit Mako comes with so I modeled…
Sequre ES126 Electric Screwdriver holder for Zack Freedman's Gridfinity organization system. No magnet holes because I don't use them.
This is a case to hold the awesome ES121 electric screwdriver: https://www.banggood.com/Upgraded-MINI-ES121-Electric-Screwdriver-Smart-Repairtools-Built-in-STM32-Chip-OLED-with-Screwbits-p-1258406.html?p=2@3021069489201207MV The tool and…
Screwdriver and bits holder for Zack Freedman's Gridfinity organization system. Holds: Sequre ES126 Electric Screwdriver iFixit Screwdriver Standard 4mm bits that work with both
Modified the original hole spacing to be used with Multiboard ( https://www.multiboard.io ). The drawer remains unchanged. You must use one of the following Multiboard M3 Heatset Insert Snaps (print 2 of them):…
Die Box ist nicht von mir! Ich habe sie nur in der Größe verändert, und ein paar kleine Änderung vorgenommen. Damit ich meinen elektrischen Schraubendreher verstauen Kann!
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
This is a box for my ES120 electrical screwdriver, a normal screwdriver and many 4mm hex bits. It also contains 2 chambers to store some loose screws and other things in it. There are also 2 small lids which fits onto the chambers. When…
This stand is designed for an electric MiniWare ES15 screw driver. the inner hole is long enough to hold the ES15 with an extra bit inserted the outer rings take 30 bits in total (4mm type) the fit for the bits isn't too tight so they're…
This is my version of a ES15 Driver and Bit holder for the Honeycomb Storage Wall system. Your default bits are always easy to get and all of the other normally never used additional bit you get can be stored in a small drawer. Print it…
This is a ES126 grip and cam lever for pressing the button. Partially remixed from https://www.thingiverse.com/thing:2805221. The grip is molded on a Wera 2mm hex driver and is extra comfy in the hand. I had to recreate all of the files…
Designed to work with a SKADIS universal hook: https://www.printables.com/model/926529-ikea-skadis-universal-tool-hook-peg-step-file-incu Print in the supplied orientation
Preparation: The Case reuses the Bar Magnets that come in the Bit Storage Case requiring for them to be retrieved first ( most likely cleaning by removing any glue and case material still sticking to them ). The Cavities account for…
Hello Everyone I am sharing a stand for an electric screwdriver from MiniWare ES15. It should be printed in the position shown in the photo in the gallery. When you complete the project, please share a photo and a comment. Thank you and…
The hole on the bottom leave you access to the USB charging port. Printed with 0.6 nozzle in PLA. Support from build plate needed for the top hook.
Sequre ES126 Screwdriver Holder modified for Multiboard
I've printed mine in PLA-CF, PLA & PETG should work just as fine. this will need Support, for your convenience the 3mf file is setup for a Bambulab printer with AMS using PLA-CF + Support for PLA as interface. Update: I released a more…
This is a remix of the excellent design of a parametric rugged case by Whity. It is modified to securely store and transport a Miniware ES15 screwdriver together with a lot of 4mm hex bits packed into tubes, which are delivered in a kit…
a simple mod of a stand for the ES15 to make It easier to print and more usable by removing the bearing turn table and wobbles
SQ-ES126 Electric Screwdriver and Bit Holder for Honeycomb Storage Wall. Fits all 24 bits for the driver, and the screwdriver all in one neat solution. Hole is 19mm wide to allow the SQ-ES126 to fit in easily, but still sit snug. Printed…
Grip piece to reduce the chance that screwdriver will slip in hand while impact driving the screws. Print instructions: Filament: 40D TPU (I used Fiberlogy MattFlex 40D) Layer height: 0,1mm (modify layer height of 0,2 Structural profile;…
Miniware ES15 case bit holder with looser fit, 6mm magnet holes, and 32 holes
A compact, upright, Gridfinity holder for the ES15 screwdriver and 30 4mm bits. There are two models, one with a base and one without (I often print my bases separately and glue them on). The holder is 4U high in order to allow storage…
Making a few mods for my ES121 so i needed a 3D model to work from. Buy here: https://bit.ly/378e7dX Category: Tools
A stand and holder for 1x ES121 driver and 15 bits Print instructions Category: Tool Holders & Boxes Summary A stand and holder for 1x ES121 driver and 15 bits
Wall holder for Philips shaver series1000. It can be charged while hanging. 2 M4 screw slot. Printer : Ender3 V2 Neo Setting: layer height: 0.2 perimeters: 4 infil: 20%
Holder for an ES121 or somesthing with a diamter of 16mm. It is possible that you need a brim. I added the .step file. Feel free to remix!
This is a sleeve style protective case for your ES15 screwdriver. The bits and the ES15 are held in the case with friction. First do a test print of just the end portion, to test the fit of the bits and the screwdriver into the case. This…
800φ4 shaft prone to snapping off if you're not careful but still strong enough to use, might want to strengthen it with a paper clip melted into the plastic (i haven't tried this yet). Print with the hex side on the printer bed (think…
This is a re-made based on Zack's original template and has been improved with the following modifications, taking into account MachoThick's design : A reserved charging hole for ES15. An added Hakko FX-888D soldering iron tip hole…
The iFixit Mako Set bits are perfect, but I also wanted my Miniware ES15 electric screwdriver on hand. This is a remix inspired by the amazing @farmerde_905596 design. The lid didn’t fit, so I printed a TPU spacer, added magnets, and…
Remixed top cover to have sign/text with second color (need MMU2 or other multicolor)
This is a knob and 2 different inserts depending on the size dial that you have on a Frigidaire Oven, stove, or range.
I've always thought that my ES15S screwdriver looked like a Lightsaber. I added these parts to complete the look! Guard module was omitted since it would get in the way of typical screwdriver operation. OpenSCAD files are available for…
after i released my first HSW-holder for the ES15 , I got a few messages from people who said it broke for them - it didn't for me until I printed one from PETG HF, so instead of buying more filament, I decided to design a tougher one -…
SQ-ES126 and Wiha Go Box MicroBits Stand A stand for a Sequre ES126 electric screwdriver and the Wiha Go Box MicroBits Set. Description I have one of the ES126 small electric screwdrivers from Sequre. This model has more torque than the…
A simple 1x2 module to hold your ES126 upright along with all its bits. Credits Gridfinity by Zack Freedman Grizzie17 's outstanding Gridfinity Refined gridfinity base Le0Michine 's great fusion360 gridfinity generator
A lid with the ES15S text for the Miniware ES15 rugged case. The font used for this lid and the TS101 lid is the Major Snafu Font.
Version of the ruggedized case for ES15 (insert only, reusing the rest of the original version) - but resized for the Sequre ES126, including an extra compartment for a bit magnetizer. Plenty of clearance is included for a lever to…
Remixed from @Alvomane's bit holder, with expanded bit slots for easier access and removal.
Holder for the Sequre ES-126 smart Screwdriver, with all its bits and the manual screwdriver. It can be mounted on a pegboard with 25.4mm spacing, and has a hole so you can charge the screwdriver at the same time. Mine was printed out of…
I really liked the original model by Majarspeed but wanted to print the grip out of TPU. The open-sided design wasn't a good match for TPU as it didn't stay on the screwdriver body, so I modified it to be a full sleeve. If you don't want…
Holder for 10 4mm Bits for the great ES120 Electronic Screwdriver. Best printed in TPU or other flexible material.
Gridfinity box 2x4x4.5U for Miniware ES15 screwdriver Accommodates 15 standard 28mm bits and 10 long 40mm bits plus 2 bins to store unused ones. Tall just enough so bits doesn't interfere with box stacked on top. Two 4.5U stacks exactly…
A simple holder for the ES121 electric screwdriver and 48 bits Print Settings Printer: Heavily modded Craftbot Rafts: Doesn't Matter Supports: No Resolution: 0.25mm Infill: 15% Notes: Easy print, use any plastic and choose any quality you…
There are two versions here, one slightly tighter fit on the hex bits. Use the nose test print to select which one works best with your printer and filament. The covertex wheel and belt clip can be purchased from multiple online shops…
Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :) A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life. You will need: XT30…
This is my take on fixing loose light and blinkers on my Laotie ES19. This bracket fix the light rod to the steering colum and prevent from twisting motion of light rod. Model can be printed in many materials without any support. I try…
I've taken Jerry's gridfinity holder for ES15+iFixit driver and some bits, and changed the base to not use magnets, as I prefer Clickfinity magnetless bases anyway. STEP file is also provided for anyone wishing to do further tinkering…
Miniware ES15 Stand for Skådis or Desktop Use This 3D‑printed stand is designed to securely hold the Miniware ES15 electric screwdriver , offering both Skådis panel mounting and desktop use thanks to its removable base. The design…
Simple little adapter to hold an ES120/ES121 electric screwdriver on an Ikea Skadis board. Prints completely without supports, and attaches using the Skadis T-Nut system . For assembly, you will need a M2.5 nut and bolt. I used a M2.5x12…
This is an improved iFixit Mako bits insert for one driver and a miniware ES15 screwdriver Changed right recess to hold a miniware ES15 electric screwdriver Changed hexagonal holes to round holes for easier insertion Angled the bit holes…
Theres a compliant joint in the hole which grabs the screwdriver when you push it into the hole. It's stong enough to hold the weight of the screwdriver, but still pretty easy to get it out. Meant to be integrated into another design.…
This is a charging stand and bit holder for an ES121 screwdriver: http://www.miniware.com.cn/product/es121-motion-control-screwdriver-steel-soldering-pen The right angle USB cable was one I had lurking in a drawer but I've no idea where I…
Update : uploaded v13 for a tighter fit and more indent to hold it in place This hard shell case solves a problem I got when packing the ES100 mk2 Bluetooth DAC into a stuffed bag - it always powers on out of nowhere and “steals” the…
llavero mensaje welcome motivo flores, posibilidad de hacer mural de pared
Einsatz für den Akkuschrauber ES15 von MINIWARE. Passend in Stanley Sortierboxfach groß.
Made a desktop mount for my ES100. Has a cutout for the USB cable as well as the headphone jack. I printed one out of TPU as well as PLA. I recommend the PLA one as it's much more sturdy and you can plug/unplug the cables with one hand…
Features: Holds 18 28mm or shorter bits (+1 with screw driver), design with 3mm holes at bottom to slot-in magnets if bit become too loosen. Hole to charge screwdriver when case is closed Hold 1 extended shaft Multiple slots to add magnet…
I liked the original version made by @51m0, but wanted a more secure clasp. I liked the clasp and hinge from the “Pill Box 2.0”, so I decided to try adding that in. Please get the bit holders from…
Replacement part for broken or missing front bumper bracket. I used organic support and printed out fell. Recommend using PETG or other stronger filament than PLA.
I made this to stop damaging my saddle bags carrying the charger. These just keep the mounting ears from digging in. I printed mine in PLA, I may reprint this in TPU to be software but I think being fillet on the edges is sufficient. For…
I made a USB-C mod for the Miniware ES120 electric screwdriver. The endcaps for Revision 1 and 2 of the PCB look nearly identical. Make sure to use the correct one for your revision. https://gitlab.com/XenGi/es120-usb-c-mod
This is a remix of https://www.printables.com/model/257971-gridfinity-es126-holder. He made a perfect fit for the ES126 so i just added the bit set box as i want to be able to bring it with me when needed.
The main goal of this design was to add a kickstand to my TD8680 Digital Gaussmeter for easier viewing. Along with the printable parts, you'll also need: 4 M3 hex nuts (pressed into shell) 4 M3 x 5mm bolts The main shell was printed in…
Tylnia stopka do Laotie ES10p. Przeznaczona do montażu z oryginalnym błotnikiem. Stopka chroni błotnik przed przypadkowym uszkodzeniem po nadepnięciu. Poprawiona wersja V1
just the screwable version of a perfect fit storage for your (old) SQ-ES126
A compact 3D-printable enclosure for building a Wii controller to USB adapter using an RP2040-Zero and Keyes1 board. The housing keeps the electronics protected while maintaining a small USB-dongle style form factor. It includes openings…
I wasn't satisfied with models for a porta filter funnel for a 58mm basket, so i decided to make my own based on some funnels i found for other machines. Fits a little snug on those extrusions on the sides of the porta filter and could be…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
This is a remix of https://www.printables.com/model/257971-gridfinity-es126-holder. He made a perfect fit for the ES126 so i just added the bit set box as i want to be able to bring it with me when needed.
UPDATE 24/01/2026 Created an high capacity vane bit-holder as someone suggested with or without magnets from Alvomane design and a larger vane and vane-lid. 18/08/2025 I fixed in Fusion 360 the small gap that was left from the tolerance…
A simple 1x2 module to hold your ES126 upright along with all its bits. Credits Gridfinity by Zack Freedman Grizzie17 's outstanding Gridfinity Refined gridfinity base Le0Michine 's great fusion360 gridfinity generator
Miniware ES15 Stand for Skådis or Desktop Use This 3D‑printed stand is designed to securely hold the Miniware ES15 electric screwdriver , offering both Skådis panel mounting and desktop use thanks to its removable base. The design…
Simple little adapter to hold an ES120/ES121 electric screwdriver on an Ikea Skadis board. Prints completely without supports, and attaches using the Skadis T-Nut system . For assembly, you will need a M2.5 nut and bolt. I used a M2.5x12…
Makes it both easier to click the button and hold on with more torque than naked. Should fit the ES121 also. I think I remixed the design from somewhere long ago, but now I can't find the source. The addition of a locking ring is my own…
I decided to have a try at getting some better nozzle visibility this weekend, I modeled this unit and printed everything and installed today. Performance is on par with the stock set up more or less. It moves the fan back and and keeps a…
Hi, To protect rear mudguard I made special feet. 5 holes made in model are aligned wit orignal holes in deck. I reccommend to use PETG due to temperature restistance. Bottom layers = 5 (which is top layer after printing Infill 20%
