141 modeli
Ho Ho Ho - Happy Holidays 2025. Replace your gas cooktop stove knobs in festive colors for an added over the top decoration. or... Replace your broken Dacor gas cooktop stove knob. We tried the replacements on Amazon, but they are huge…
Edit: Definitely check out the remixes if you’re considering printing my model. There are two improved versions that look pretty decent! :) small keychain for an exacto knife blade. easy to print with a 0.5 mm gap in mechanism. Screws in…
After many months of testing I present the magnetic action exacto knife, great little tool for arts and crafts, opening boxes and also fun as a fidget toy (use responsible ;) ) You will need three 5x2mm magnets which will need to be glued…
This is a 1:1 recreation of the GameCube shell top. more parts of the GameCube on the way. this is about 98% accurate but will fit OEM parts as well. I've included 2 types of the shell one with and one without the vent sides so you can…
This is a 1:1 recreation of the GameCube Bottom Shell top. more parts of the GameCube on the way. this is about 90% accurate but will fit OEM parts as well. I can't guarantee that a Gameboy player and modem adapter will fit since i do not…
This is a 1:1 recreation of the GameCube Controller Plate Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes…
This is a 1:1 recreation of the GameCube Drive Door Shell. more parts of the GameCube on the way. this is about 95% accurate but will fit OEM parts as well. this does fit OEM Top Jewels. Print Settings Printer Brand: Creality Printer:…
Resized for common affordable exacto knifes found in Europe, anywhere from hardware stores to Aldi.
These linear rail MGN12 and the block MGN12H objects with exact dimensions, are intended as help tools in prototyping and designing. There are 2 types of rails, one without holes, that can be elongated/stretched to any desired length by…
The original design by @Magmabow is a fantastic design but i had trouble printing it with my 0.6mm nozzle. as such, this project was born. Includes a slide safety. Uses M3x8 screws and nuts (x2). no glue required.
Cap for an ExactoKnife with a diameter of 11mm. Takes about 20 minutes to print at 0.2 layer height.
100% as in the series, unlike the others. Print settings: The model is designed for printing with the parameters. All layers 0.1 mm Nozzle 0.4 Filling 100%. To glue evenly, insert a piece of filament 4-6 mm. Print 5 (stones) 1 square, 2…
4040 profile object with exact dimensions for prototyping and mockups adjust the Z scale to obtain longer profiles. Category: 3D Printer Parts
I have a lot of picks, tweezers, files, and exacto knives. I wanted them to have a place but also have the most frequent ones easily accessible. Behold the 5 bay, stackable, pick, file, exacto, sharpie, tweezer storage. Stackable. 4…
I wasn't finding any hobby knife holders for the Honeycomb Storage Wall. While at my desk I was using a Sharpie and noticed it was about the same diameter as the Fiskars hobby knife. I took Akinayr's Sharpie holder and removed all but 1…
Features: Includes 2 model files: Handle and Sheath . Easy to assemble: Simply push a standard exacto knife blade into the slot for a snug fit. Compatible with standard exacto knife blades. Optional: Attach a keychain ring for…
Needed a holder for my stanley exacto knife.
ESP32-CAM 3D object with exact dimensions for mock-up purposes and prototyping Category: Props
a cool mecha melon figure in the T pose see the sizes on one of the fotos would be nice if you do a small rewiew
**Updated** I printed it then realized I have exactos with long covers and were a little hard to pull out so I made 2 version one for short and long covers and extended the aread to make it easier to pull out the exacto Remixed the…
This 3D model is a specially designed hook attachment for a Lifetime® Tool Shed. It is sturdy and extremely durable and made to hold many tools safely. The hook can be easily attached to the shed wall slots, helping to keep tools…
This Grid is fitting an ALEX drawer completely.
Internal magnets inserted mid print using a M1 command to pause magnets used are 5mm x 2.5mm prints in place with a 0.4mm tolerance gold boarder is printed using prusaslicers multi-material single extruder mode
1x4x2 Gridfinity bit fitting two exacto knifes
this is a remix of the Exacto knife keychain by Michel Bauer . I really like his design but I'm a fat-fingered klutz and needed something with longer handle. I moved the eyelet from the blade handle to the base of the sheath and added a…
Small case for holding 100 No 11 Exacto blades. Prints without supports, PLA or PETG, 0.20 layer height or better
KP08 bearing object with exact dimensions for prototyping and mockups Category: 3D Printer Parts
This is a remix of a 1x1 gridfinity bin to hold an exacto knife and extra blades. It can hold everything from a set like this. https://amzn.to/44P9yTJ
Not round to descurage rolling.
This is an exact replica of the Lego style lightsaber. I made it to the exact measurements and you can scale it up to any size that you desire.
This is a Gridfinity module designed for Zack Freedman's Gridfinity system. It holds 1 sharpie, 1 exacto knife, and a lot of extra blades. I printed this at .20mm layer height with 15% infill.
2020 profile object with exact dimensions for prototyping and mockups adjust the Z scale to obtain longer profiles. Category: 3D Printer Parts
775 motor object with exact dimensions meant for prototyping and mock-ups Category: Props
Uses an M3 adapter to fit to the honey comb system
DF54 exactly indicator that uses the original screw. PETG printed with MMU3, but single exdruder also be fine :)
It's a much safer and convinient case that allows easy extraction. Compatible with the gridfinity refined ecosystem that also alows fixing it to the table. Aditionally, this is the link to the OnShape source project which will let you…
Friction cap for some Exacto knives. Prints without supports. PLA is best, but PETG also works. 0.20 layer height or better.
2040 profile object with exact dimensions for prototyping and mockups adjust the Z scale to obtain longer profiles. Category: 3D Printer Parts
Grip for Exacto handle print with TPU Print Settings Printer Brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Filament: Duramatic TPU Black Notes: Grip for Exacto handle print with TPU Category: Hand Tools
V1.3 Coming soon Cap and Fusion 360 file. V1.2 Coming Soon Working on the tolerance. V1.1 4/17/19 I updated the dimensions and the style of the exacto knife. Here are the changes… Collet 1) The thread is now 15mm long. It was 10mm before.…
Gridfinity storage bin for your exacto knives and blades, including a magentic blade pickup tool for safe handling of the sharp blades. Requires a 6x2 magnet to be inserted in the tool. I got my inspiration from this model:…
parts required 1x twist top glass jar So quick, you don't even need to open the lid of the jar. Just tip the jar and dispense. 1) Tip the jar with the cover on. The straw will be filled with exactly one teaspoon of content and any excess…
Like the base model, I recommend to print this with non-tree supports to support the whole length of the hinge. Would you want to change the pattern significantly, I suggest going back to the base model ("Rugged Box (print-in-place &…
A set of JSB Exact pellet, pellet with modeled grooves and barrel blank. Dimensions are measured and may not reflect with the actual dimensions JSB Exact pellet. The pellet with modeled grooves should fit in the barrel blank, if not a…
Box for airgun pellets in the shape of JSB Exact Diabolo. The box can hold approximately 200 pcs of airgun pellets.
I didn't actually find a holder for a name brand Exacto knife for the Honeycomb Storage Wall. So here we go. Just print it upside down. You might need to scale up or down as needed, if it doesn't fit in the empty inserts. half to 1%…
I have re-remixed my own design to exact dimensions with extras; The previous design fits well, but is 200 mm long. The original lid is 198 mm long. Also, the with is corrected from 110 mm to 111 mm (* for tolerances I made it 110.8) The…
I attempted to recreate the Yeeps Hide And Seek Model and this is how it turned out.
Exacto knife blade cover for 5/16" (8mm) tool. Using a brim is recommended due to low surface area contact with the print bed. Use of PETG is also recommended because a PLA test sample lost most of its press fit over a short time.
SCU8UU bearing with exact dimensions for prototyping and mockups. Category: 3D Printer Parts
i would probably print it upside down
608ZZ bearing object with exact dimensions for prototyping and mockups Category: 3D Printer Parts
1X1X3 bin for Exacto and a box of blades
Holds an exacto knife and room for 4 blades. Each compartment is sloped at the end to allow for quick and easy access. takes up 1x3 gridfinity spots
To make my Exacto knife handle easier to grip I created this. I printed mine in black TPU. It's a tight fit, but with some effort is slides on and stays put without any glue. It also keeps the knife from rolling around on my work bench.…
These allow for the addition of M3x4Lx5W heat inserts. Mark the belt with a fine tip Sharpie or ballpoint pen and add/remove teeth as needed. Can be used to clamp the end of two belts to cut to length with exactly identical number of…
the top and bottom parts are printed separately and snap together at the hinges. this can take a bit of force, so I would recommend doing this before inserting the blade. I would also HIGHLY recommend printing the blade inserting tool. It…
Needed a case for a generic exacto knife with room for extra blades. The lid is held in place with 6x3 magnets in each corner. The rooms in the case has cutouts for easier access to the blades and handle.
See my collection for other Thermo models
This is an update to my Bubbles strip included in my Kenobi ANH saber, also includes the cut down for Vaders saber and the PCB.
Finally got around to making a little case for the exacto knife kit set I bought from the dollar store. This is my 2nd 3D model I've designed and printed and my first actually functional model so it is a bit scuffed and lopsided here and…
Tested with JSB Exact .177 box. Files are print-oriented.
holds 2 of each size exacto knife and some blades
The inside packaging of this set was terrible. So, I designed my own that involves 3x1mm magnets and one 8x3mm magnet for the blade retrieval stick.
A model of a microservo respecting the real dimensions
My exacto blades come in a little plastic case with 100 crammed in loosely, so I made this to hold some in a convenient location. I also added a place to store the used ones. And in a year or 5 when you've filled up the used blades…
made a box cutter balisong a few days ago and figured why not make one of a Exacto Knife. The handle parts are connected by 1.75 mm filament(the hole will need to be drilled out in both the handles and blade holder), which you can heat…
This is my take on a 3D printable Exacto Knife! There are various models on Printables which contain different combinations of features I was looking for in this tool, but none of them got it perfect, so I made my own! The cap attaches to…
I wanted a place to hold my Fiskars Hobby Knife because I use it so frequently. I can't currently drill anything into the walls where I'm staying and so I haven't set up a Honeycomb Storage Wall or an IKEA Skadis or pegboard or anything.…
LM8UU bearing object with exact dimensions for prototyping and mockups Category: 3D Printer Parts
I would print one for each side of the glass lid. Print face down with supports and zero for raft.
So I just wanted to test something that I saw in a tutorial for designing stuff for 3d printing and I just so happened to had recently bought a pair of exacto knifes with 8 blades. So this is it. I used foam in the inside to give it a…
A simple yet plenty strong storage solution for your most used tools in two variants. The holder mounts firmly onto the Skadis pegboard. Variant 1 (extended) can hold: 2 screwdrivers 3 rows of bit holders 1 plier 1 exacto knife 1 tweezer…
REMIX FROM: https://www.printables.com/@Nahuel_114346 I designed this spool holder to hold a spool with 32mm inner diameter or bigger, and with 70mm width max. I've been using it for a while and is stands perfectly. You'll need 2 608ZZ…
Hold your pen or Exacto knife on you work bench or desk right were you need it. I Glued both of mine down so I never loose my pen or Exacto. No support needed
Holds all three sizes of Exacto Knive and fits snuggly on IKEA SKADIS pegboard holes.
E3D V6 object with exact dimensions for mock-up purposes and prototyping Category: 3D Printer Parts
rmpel's cover was exactly what I was looking for, only the MW logo wasn't quite right for me as my Ender 5 Pro came with a Landy branded unit instead of the MeanWell. So I quickly edited the logo out, opting to leave a blank space instead…
Edit: With this model, the knife is easier to hold, and the holder gains a new function.
In the GDR and the USSR, a children’s building set called Grossblock was quite popular. It was produced from 1970 to 1989 by the factory VEB Plastspielwaren (Plaspi) in the town of Waltershausen, Thuringia , GDR. Today, it’s hard to find…
This is a remix of @kbob's quick remix of @AdrianGarside's remix of @IsaacW's desiccant box. I started with @kbob's model and shrunk it to 74% of it's original size then elongated it from 111mm to 127mm to fit into the desiccant slots in…
🖨 PrusaSlicer Settings (use this exactly) Print Settings 0.20 mm QUALITY 3 perimeters 4 top / 4 bottom layers Infill 20% (Grid or Gyroid) Supports OFF Adhesion Brim: 3 mm (recommended) ⚠ Honest heads-up This version is strong and…
Little container for exacto knifes, can hold 4 (or more) different sizes
Made this for these two red bodied x-acto knife bodies. I think they're x-acto #5 heavy duty knifes. lmk if you have any questions!
I needed a convenient solution to keep two hobby knives readily accessible while avoiding the hassle of dealing with their covers, yet ensuring safety. I envisioned a setup where both knives remained visible and had a designated spot when…
I lost the cap of my exacto knife. I don't love poking its blade into my fingers when foraging through pens and tools. I couldn't find something that fits my knife handle. So I made one. It works on a knife with an 8mm ⌀ handle. The first…
The exact size to level the printer's front foot is 17,56mm (from printer's CAD model). Other parts on thingiverse did a lazy job getting it right. If you have a level base plate for the printer and want to get it right, use this version!…
Exacto knife holder for 1x1x2 multibin shell. You will need to print the Top Click Rim as well. Print face down w/o supports.
When I was around 10 years old, I got this set of X-ACTO® knives with assorted blades in a very nice wooden box with an absolutely horrendous plastic insert. Many, many, many (too many) years later, I created a new insert. Some of the…
Standard PLA+ settings.
Thought the two parts was unnecessary so I made this. My tolerances were a little low, so I've widened the throat a little in this version. Might extend it to fit even larger/longer blades as well, and make the stop part of the single…
Fits tight. Slides in well with using a vice.
This is a Braille version of the ExactoKitchen converter.
Cushion grip to add to a pen or exacto knife to make it easier to control and add comfort. Having the three sides makes it much more controllable for an Exacto blade. It really helps you hold the angle you need. Print in soft TPU like…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. This design takes the smaller exacto knives - I have excel and…
I also had problems to get the clock working although I used a high torque module. So I came over to Harshit Sanghvi 's great version with the stepper motor and made some further improvements and additions: I added a “DFplayer mini” sound…
Print Settings 2-3 perimeters 10% infill no supports rest is up to you
I made this for a slightly different model of scalpel/exacto knife than I could easily find. This has a generic 10.5 mm hole held at a 30 degree angle, it is slightly tapered inside to hold the tools securely. I also left space for a…
Simple holder to hold a set of wood carving tools, files, 2 exact-o knives and blades. Included Solid edge file.
