37 modeli
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
This is an adapter that makes sure that the bezelfree kit from Asus is secure on thin monitors like my AOC 27 WQHD screen. Without these adapters the kit is really loose. For me the top side only needed the adapter, so I printed 4.…
Holds for DF010D, ML704 Led light and BL7010 battery
This is a remix of Mr_3D BMW phone holder. The original is designed for a different phone holder. In addition, I wanted it to be modular. The ball joint is standard - 17 mm in diameter. It was designed for an F10, it was also tested in a…
Uses the Bumper Brace from the Original Model.
Bosch trimmer blade best printed in Flexfill 98A. Roughly half the price of original blades and better reliability. Tested multiple design and filament options throughout the summer. Original Bosch design and PETG options were too bristle…
Alright, story time. Couple years ago i bought myself a Specna Arms Flex SA-F01 for airsoft. I was a total beginner and i wanted my own so i wouldnt have to keep using my local airsoft club's rentals. At the time, i didnt know how much…
Front gear cover for Tamiya TA01 TA02 DF01 Chassis Tested quite thoroughly in a Top force evo to ensure it fits properly flush with the front gear housing, bearings will sit into place and that there is no interference with the gears. The…
Used for a Tamiya Dirt Trasher, based on DF-01 Chassis.
Designed to nestle into the crooks at the far left and right sides of the wings. Uses two Small-size command strips for wall mounting, one for each side. Prints in the provided orientation (flat wall-mount side facing down). Minimal…
Tamiya FF01 Rear Shock Tower fits in the stock spot and everything fits perfectly, I added extra bracing around the shock mounting locations to make everything stronger. Use a PETG or a CF-PETG and do 6 walls and 100% infill.
Stand for Makita DF010D with or without bits holder
Attachment to secure the wheels of Bosch wood shredders. This part often falls out and gets lost, so the wheels randomly detach. It's very slightly larger than needed as even the two wheel pipes on my shredder have slightly different…
A battery holder for the Heewing F01 or other similar wooden rc structures.
Inprove the fitment and appearance on Mastio 1/24 scale models with custom HRE FF01 wheels.
Info The tolerances are quite tight, so it is as airtight as I could make it. I will add a version with looser tolerances so you can screw in accessories and filters easier later on. If you have feedback, let me know^^ Print instructions:…
Front mounting bracket for the body. Used for a Tamiya Dirt Trasher, based on DF-01 Chassis. Holes are 2mm
Accessoire en 2 pièces à fixer sur la makita afin d'avoir une meilleure prise en main de la visseuse en position verticale. Insérer 2 écrous M4 à l'intérieur de la bague Dévisser la vis qui assemble les 2 parties de la visseuse (au pivot)…
Used with a standard 2.5" shop-vac connector. Print with hose entry (round part) on print bed. Supports and brim enabled. There are cavities in the main body, as well as the 2 round barrels for a 1/4"x1/4" round magnets to help it stay…
Hi, I designed a DJI o4 camera mount, based on the given dummy. The camera has to be slided into the mount, with the cable being on the upper side. Inside of the mount there are clips, gripping into the lens. My recommondation is to print…
For mounting the Brace on the chassis you have to use the two suplied M3*10mm countersunkscrews from the shock tower and two additonal M3*6mm countersunkscrews to mount the brace onto the shocktower.
64.5mm wheel hub cover for enkei PF01
Designed and printed a TPU Bumper for this mount. Designed it for my Trabandt body but it did also kind of fit my Datsun 510. Used 4 M3 18mm screwd for fixation.
Hi, As the title says: This is a Mount for the Speedybee F405 on the Heewing F01. You can use the original screws from Heewing, but will have to use longer M2 screws for the standoffs. M2x8 should be fine. Have a nice one.
A simple mount to hold a YF0199 solar light using zip ties. No drilling is necessary. Includes shafts for all possible zip tie orientations. Link to the light: https://www.aliexpress.com/item/1005005799927259.html
Clipje om 2 automaten aan elkaar te koppelen om hier een kookgroep van te maken Mogelijk om op de Bambulab X1C 200 st in 1x te printen. Ongeveer 0.6 gram materiaal per clipje nodig.
No supports needed when you print the model with the opening facing up. Do keep in mind that the MF01 can run pretty hot when running it with a diffuser.
Inlet-Cap for the Shigematsu STS-CF01 Mask Inspired by Jan Asleep's model “NATO 40mm Gas Mask Inlet Carb” ( https://www.printables.com/model/1180064-nato-40mm-gas-mask-inlet-carb) These caps are specifically designed for the bayonet mount…
This is the model of a replacement button for the handle lock of the stroller Feder F01 . A replacement part is not available in stores or from the manufacturer, so I simply recreated it myself. I made 2 versions, one with a slightly…
Hi, Maybe you can use it for your modeling or just because you lost the original one: this is a model of the camera dummy from the Heewing F01. Fits perfectly.
Hi, I edited the given cap and made a good printable version. youll have to insert the antenna protector first and insert the o4. I cut a bit of the elapor to have the usb-c port accessible. Also the camera needs a small cut, if youre…
I got tired of having my flashlight turn on in my pocket, so I slapped this cap together for it. No more button pushes in my pocket. Fit is tight. This thing was made with Tinkercad. Edit it online…
Hi, Just combined these two models.
Подставка для кофемашины krups quattro force ea82f010. решает проблему капающего на стол молока
A simple wall holder for Aneng BF01 with two screw holes
Inner diameter - 19.5 mm Width of walls on the inside - 1mm Diameter of hole for cables - 7.5mm Holes for M4
Inlet-Cap for the Shigematsu STS-CF01 Mask Inspired by Jan Asleep's model “NATO 40mm Gas Mask Inlet Carb” ( https://www.printables.com/model/1180064-nato-40mm-gas-mask-inlet-carb) These caps are specifically designed for the bayonet mount…
