Liczymy pasujące modele…
Reduce the loudness of your IcyBox Harddrive Enclosure by mounting a silent-fan(25mm) instead of the annoyingly noisy default fan(10mm thick) that comes with the box. This fan-mount should do the trick of mounting the thicker fan to the…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
With this mount a 120 fan can be easily installed on the Open-CNC-Shield by Timo Altholtmann. Spacer bolts are needed to get a proper distance. A detailed assembly instruction and a parts list is also available on my homepage (German):…
The Sovol SV06 faces a challenge in which prints with frequent retractions tend to fail due to clogged nozzles. This issue is caused by heat creep, as the heat dissipation is inadequate. To resolve this problem, the following steps are…
Required Parts: One M3 8mm screw (four if you're not using the fan mount) Three M3 screws, 10mm or longer (none if you're not using the fan mount) Three 3010 fans (no screws are needed to attach the fans; they'll fit snugly) Important…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…
For more information see the origininal file of this remix. This is a smaller Fanmount for a 30mm fan.
moved the Fan 30 mm back to be able to get my Samsung G9 between Fan and Dashboard
PETG is recommended. You need to enable supports on build plate only! I have added a version with a brim, if you have problems with printing. The fan is mounted with four M3 screws. Be sure about the right length. Too long scewes will…
Fan bracket Fanmount PC fan 80 92 120 Wall mounting Adjust your fan to your defined flexibility yourself. Compatible to the Gopro - connection - system Inspired and compatible by: https://www.thingiverse.com/thing:2194278 Bracket for…
I have remixed a Model from Thingiverse to use a 80mm Fan for Stepper Driver Cooling and reducing Fan Noise on my Sapphire Pro. I have used this 80x80x10mm 24V Fan wich is really quiet in my opinion. I glued in the m3 nuts to attach the…
Lightweight bracket that leaves the IO ports free
simple Fanmount for the Qotom Mini Pc Q20300g9-S10 C3338R etc. because even when idle they run freaking hot. this is a work in progress: in the end my idea was to put 2 fans on a fanmount and connect them to 1 of the ph2.0 connectors on…
Basic fan mount for 3010 fan on a Raspberry Pi using the existing holes. It clears the pins and allows for simple breakout board (I used a transistor and GPIO16 to control the fan with PWM from the PI but you can hook it up to the 5V to…
Update : This part works well but be aware that if you start the print with your part fan going 100% the air blowing on the side of the part might cause the print to come away from the bed. Either start at 10%-25% like I do or maybe…
Fanmount for the orbiter ender carriage but lowered by 5.5mm to accommodate Rapido
You will have to cut 4x M3 treats to this part to mount it to the existing holes and to an 30mm fan. Have fun and see my other designs in my profile ...don't forget to share your prints. I would love to see some parts. Don't forget to hit…
Small mounting bracket to cool a tmc 5160 plus Hardware 8 M3x10mm 6010 axial fan Submit feature requests here!
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, PCTG, ABS, GreenTec, GreenTec Pro or similar). New Version for…
In the "Multiled QT" model from the manufacturer GS Vitec, two 24V fans are connected in series. After these broke down, I have constructed a cover for a single 48V fan here. So this is a replacement part, or an improvement on the…
I designed the FanMount Pro, a 3D-printed mount that allows you to hang a fan normally placed on a stand on a wall, wooden surface, or any other location you can think of. It can be firmly secured with four screws and is made extra thick…
This is version 2 of the 2 Fans Mount for the BeamCaseSFF with mounts for 120mm and 140mm fans. -Depending on the orientation of your case, these are either top or bottom case fans mount. they are especially put on the same side as the…
Remix of Thorvalls Dimm.2 fan mount for the never Dimm.2 H5 Gen4 with the standoffs allready on the board. Adds also space for surface mount components that they dont touch the print. Print with petg the ssd:s and the surfacemount parts…
Remix of Thorvalls Dimm.2 fan mount for the never Dimm.2 H5 Gen4 with the standoffs allready on the board. Adds also space for surface mount components that they dont touch the print. Print with petg the ssd:s and the surfacemount parts…
This is version 2 of the 2 Fans Mount for the BeamCaseSFF with mounts for 120mm and 140mm fans. -Depending on the orientation of your case, these are either top or bottom case fans mount. they are especially put on the same side as the…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…
