P
PrintablesWallace
Ikea Fredde snap on phone holder
A simple snap on phone holder for the Ikea Fredde desk.
- Pobrania
- 212
- Polubienia
- 31
- Ocena
- 5
Wyniki wyszukiwania: fredde
Liczymy pasujące modele…
P
PrintablesShokunin
Laptop Mount for IKEA FREDDE Gaming desk
This is a Laptop mount that fit the frame of IKEA FREDDE Gaming desk. I designed the mount to fit a surface laptop 2, which is around 22.3cm wide (22.8cm when opened) so there is 5mm gap between the screen back and the desk frame. however…
- Pobrania
- 156
- Polubienia
- 56
- Ocena
- 5
P
PrintablesIoannis_Bo
USB and SD card hub (Ikea Fredde Cup Holder or 80mm Drillhole)
Ikea Fredde cup holder USB and SD card hub This hub replaces one of the two cup holders on the Ikea Fredde desk. Fits in an 80mm diameter drill. The model has a diameter of 79.85mm. It can hold up to 7x USB-A sticks, 6x SD cards and 7x…
- Pobrania
- 133
- Polubienia
- 26
- Ocena
- 4,5
P
PrintablesBf2-TodesEngel
Headset Halter für Ikea FREDDE Gamingschreibtisch
Habe mir einen Headset Halter für meinen Schreibtisch entworfen.Der wird nur geklemmt .
- Pobrania
- 131
- Polubienia
- 17
- Ocena
- 5
P
PrintablesJDM Stig
Ikea Fredde Cable Managment Clip
3 wire cable management clip for the Ikea Fredde desk. Left and Right options available. To be mounted on the metal framework of the desk, optionally you can use an M3x12 grub screw for additional grip. Printer = Creality Ender 3 V3 SE…
- Pobrania
- 87
- Polubienia
- 14
- Ocena
- 0
P
PrintablesCaiben
Ikea Fredde headset-hanger
Needed a hanger for my headset and there was some unused space on my Ikea desk, it mounts on one of the vertical rails grabbing around it, using two m3 screws about 15mm in length, the screws need to be self-tapping.
- Pobrania
- 86
- Polubienia
- 20
- Ocena
- 4
P
Printablesmoonrakerone
Fredde rail mount for Logitech Z906 remote
I cut off the rail from 3DesignMJS' design, and stuck it on the relevant part of franckarts' design in tinkercad.
- Pobrania
- 81
- Polubienia
- 17
- Ocena
- 4
P
PrintablesGmoLargey
Ikea Fredde lower rear cable tidy brackets
to suit ikea fredde desk that has the 20mm thick lower backboard (new fredde style with oval tubing). my own quick design for getting the cables neatly organised that were drooped behind the ikea fredde desk, I was using adhesive cable…
- Pobrania
- 52
- Polubienia
- 20
- Ocena
- 5
P
PrintablesNorbi969
Ikea Fredde pencil and pendrive holder
I made a pencil and pendrive holder instead of the cupholder for the Fredde desk.
- Pobrania
- 51
- Polubienia
- 6
- Ocena
- 0
P
PrintablesThe3Dprinting
Fredded Fred With Nut:)
While on Stream with Wekster I was trying to say "Thread" and it just came out as "Fred" so they were just joking about it. Before anyone else had the brilliant idea of making a model I decided to do it myself. Using Wekster's Mini Fred.…
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesWallace
Ikea Fredde snap on key holder
A simple snap on key holder for the Ikea Fredde desk.
- Pobrania
- 48
- Polubienia
- 8
- Ocena
- 5
P
PrintablesFeher Agoston
IKEA Fredde Headphone Mount
A headphone mount (hanger, holder) for the IKEA Fredde desk. It snaps on the shelf tightly. FreeCAD sources are attached so you can adjust the tolerances if needed.
- Pobrania
- 24
- Polubienia
- 0
- Ocena
- 0
P
PrintablesStaniol
RFID mount for IKEA FREDDE desk
ASSEMBLY For printing with no/minimal supports top and middle pieces sholud be printed upside down. Model is supposed to press fit together, tested on PLA. If it doesn't, use superglue on middle and bottom pieces. Don't glue the top if…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesThe Blue Portal
Stream Deck Mk2 Ikea Fredde Desk Snap Mount
Needed a mount for a newly purchased Stream Deck. Wanted to be mounted on my Ikea Fredde Desk Lower Shelf. Found this model for phones and modified it so it snuggly fit the Stream deck without any wiggle.
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPo_temkin
Ikea Fredde - Oval tube monitor mount
Have a nice day, everyone! For a long time, I had two 24" monitors on my Fredde, but for personal reasons I decided to try a large flat 40" 32:9 panel to replace them. Unfortunately, the Fredde doesn’t have enough room for such a big…
- Pobrania
- 15
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPo_temkin
Ikea Fredde Delta Lamp Holder
Hello to everyone! Some time ago I came across the problem that I couldn't find a good delta-lamp mount compatible with Ikea Fredde. Therefore, I made this one. For assembly, you need: 4x M5x20 screws with round head 4x M5 nuts More…
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJDM Stig
Oculus Sensor Clamp - Ikea Fredde Desk
Free up the space on your Ikea Fredde desk and mount your Oculus Sensors on the frame allowing you to set the hight of the sensors to the perfect point. I use these to get the best sensor detection at my desk when in Flight or Racing…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNikodem Białoń
IKEA FREDDE Headphone Hook - Snap-on / No screws!
IKEA FREDDE Headphone Hook - Snap-on / No screws! Simple and functional headphone hanger designed specifically for the IKEA FREDDE desk. If you're tired of your headphones cluttering your workspace or taking up valuable desk surface, this…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJesse
Insignia USB Hub Mount for FREDDE Desk
A mount for the Insignia USB Hub that fits onto the bar of the IKEA FREDDE Desk
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printables
Pen, USB, SD holder for Fredde desk rail
Desk rail pen holder for Fredde desk. Needs 6mm hook and loop strap to hold in place. Smaller holes will fit Lamy Safari pens, large fit Lamy Al-star. Print low density with two perimeter layers, or whatever your machine likes best, most…
P
Printables
IKEA Fredde Headphone Mount
A headphone mount (hanger, holder) for the IKEA Fredde desk. It snaps on the shelf tightly. FreeCAD sources are attached so you can adjust the tolerances if needed.
P
Printables
Stream Deck Mk2 Ikea Fredde Desk Snap Mount
Needed a mount for a newly purchased Stream Deck. Wanted to be mounted on my Ikea Fredde Desk Lower Shelf. Found this model for phones and modified it so it snuggly fit the Stream deck without any wiggle.
P
Printables
IKEA FREDDE Headphone Hook - Snap-on / No screws!
IKEA FREDDE Headphone Hook - Snap-on / No screws! Simple and functional headphone hanger designed specifically for the IKEA FREDDE desk. If you're tired of your headphones cluttering your workspace or taking up valuable desk surface, this…
P
Printables
Headphones desk extender for FREDDE (IKEA)
Because the original design was marking/ damaging the interior foam of the Headphones. I was made an extension
P
Printables
Pen, USB, SD holder for Fredde desk rail
Desk rail pen holder for Fredde desk. Needs 6mm hook and loop strap to hold in place. Smaller holes will fit Lamy Safari pens, large fit Lamy Al-star. Print low density with two perimeter layers, or whatever your machine likes best, most…
P
Printables
Ikea Fredde customizable phone mount
Adjustable phone mount for the Ikea Fredde desk. I am no professional user of solidworks so pleas eleave any and all advice for improving on how i create models. Adjustment is made by changing the angle in the sketch
P
Printables
IKEA Fredde Xiaomi Mi Computer Monitor Light Bar
I wanted to have a solid place for the remote lighting control for the Xiaomi Mi Computer Monitor LightBar.
P
Printables
IKEA Skadis Fredde desk mount
I created this model to mount Skadis boards to the back of my Fredde desk. Thank you @yaczesuaff_544976 for the idea of using knobs as attachment points. Required parts: Fredde desk 56x56 Skadis 76x76 Skadis 4 top connectors 4-5 bottom…
P
Printables
Ikea FREDDE Desk hook
A small and robust hook for the Ikea FREDDE desk. No supports needed, short print time. It has more than enough strength to hold a pair of headphones.
P
Printables
IKEA Fredde lower rail cable clip
The lower rail of the IKEA Fredde desk is perfect for hiding cables going from one side to the other. This simple clip helps to keep them in place.
P
Printables
IKEA FREDDE additional shelf
simple small shelf for ikea fredde desk, good for keeping minifigs or other stuff, i didnt test the capacity but seems sturdy. i reccomend using some superglue for connecting parts
P
Printables
Ikea Fredde USB SD holder
Do you own an Ikea Fredde gaming desk and you have a bunch of USB thumb drives just floating around? Introducing yet another usb holder, this one attaches and detaches easily to and from Ikea Fredde gaming desk's main shelves. It holds 8…
P
Printables
IKEA Fredde under Desk clip
Under a Fredde Ikea is a long open metal C bar perfect to hide cables... if only I could keep them from falling out... I present a clip! works for me. Print Settings Printer: FLSUN Q5 Rafts: No Supports: No Resolution: 0.2 Infill: no…
P
Printables
Fredde cup holder
OK, so this is a fairly specific utilitarian thingy... I just got a new desk from IKEA, and they named it "Fredde." This desk has 2 cup holders built in, but while I found them fine for a can or bottle, I like to drink ice water from a…
P
Printables
Ikea Fredde Replacement Cup Holder
I managed to lose one of the cupholders for my Ikea Fredde Desk so i modeled a replacement!
P
Printables
IKEA FREDDE Microphone support
A nice support that I made for my microphone, to save some space in the office. How I printed it: 0.6 nozzle 15% infill gyroid might want to use brim
P
Printables
Ikea Fredde Key Hooks
Smashed together quickly in tinkercad. There's some residual geometry from the original, but it gets rounded out by my slicer.
P
Printables
Ikea Fredde leg cover spare part/extension
Included file for replacement (no extension) and for leg extension. The extension length is 5 cm. You can reduce the length with Cut tool in Prusaslicer. Print the model with enforced supports (in Prusaslicer). I used PLA to print this…
P
Printables
Fredde Hook
Print in-place at 15% fill, no brim I used PLA, pretty much any material should be fine It snaps on with a satisfying click It's relatively sturdy, but I wouldn't hang more than a few hundred grams Needless to say this model is not…
P
Printables
Watch holder and hook for Fredde
Easy place to charge your watch without cluttering your desk. The angle looks scary, but the charger's magnet is more than enough to hold it in place. Comes with a free hook below to hold other stuff! Building PLA Supports recommended 15%…
P
Printables
Ikea Fredde Computer Desk Pen Cup
Deeper cup to hold pens/pencils to replace the existing cup holder on an Ikea Fredde Desk
P
Printables
Skadis Fredde desk adapter
What happens when a great system (Skadis) meets a great desk (Fredde)? Even more greatness! Use these parts to easily and securely attach Skadis boards to the back of your Fredde desk. Print settings: PETG/PLA/ABS/whatever layer height:…
P
Printables
Fredde Desk Bracket for 7" LCD
A simple clip for the LCD to mount on an Ikea Fredde desk. The 7" display is sold under many brand names on Ali-Express and makes a great Klipper screen. This is the one I bought “iPistBit 7 inch IPS LCD TFT Display HDMI Touch Screen…
