1 / 3
USB and SD card hub (Ikea Fredde Cup Holder or 80mm Drillhole)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hub replaces one of the two cup holders on the Ikea Fredde desk. Fits an 80mm diameter drill.
- Ocena
- 4,5 / 5
- Polubienia
- 26
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 1261
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (36)Powiązane
Ikea Fredde cup holder USB and SD card hub
This hub replaces one of the two cup holders on the Ikea Fredde desk.

Fits in an 80mm diameter drill. The model has a diameter of 79.85mm.
It can hold up to 7x USB-A sticks, 6x SD cards and 7x Micro-SD cards.
My printing settings:
Supports: none, only print in saved orientation (face down).
Layer height: 0.16mm
Density: 10%.
Wall lines: 3
My print time was about 1.5 hours. I am very happy with the result.