Liczymy pasujące modele…
A Chibi style version of Frieren, the protagonist of the manga/anime Sousou no Frieren . Printable on FDM printers. Two models uploaded, which only different in eye parts: one has blank eyes and another has them modeled. Default size is…
Frieren's Mage Staff - Sousou no Frieren / Frieren: Beyond Journey's End Red Fabric to wrap around the staff's head is not included. Thread the corner of the fabric through the bead and secure with adhesive. This build fits schedule 40…
A figure of Frieren, an anime character. Default size is roughly in 1/12 scale, which could barely be printed by a FDM printer under normal setups. Printing Tips (FDM, default size) Support materials are required. Set higher infill or…
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Stark's Axe These parts fit onto a schedule 40 1" PVC Pipe. The seven small alignment pins and 2 large axe head threads should be printed lengthwise for maximum strength (I use 6mmx50mm wooden dowels bought off of Amazon). It is suggested…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! Frieren season one last year was a masterpiece, the music, the art, the story, I fell in love with all of it. And with the release…
Model of the staff frieren is using in the Anime Frieren, beyond journeys end Made this staff to train a little more on my modelling skills. It is for sure not perfect, if you want to have a go at it let me know. I can share the solid…
A mirrored lotus ring gifted to Frieren by Himmel while adventuring. This is for people who want extra props while cosplaying Frieren or Himmel. Print with Resin and an advance warning that this print will be very delicate. The inner…
A model of Frieren reading a grimoire. Printing Tips (FDM, default size) Rotate X-axis backward ~30 degree. Other orientations may work but I didn't try. Supports are required. The samples were printed under "organic" style with 25 degree…
Enjoy my work? Find my full collection of work over on Patreon Or Show your support by buying me a coffee ! Fern might not be my favorite, but she has her part in the story. Supports are needed.
Hey it's THAT elf everyone is talking about! Free sample (supported too!) from the Capsule chibi Patreon. Find this model in flying pose, and mimic mode at: https://www.patreon.com/capsule alongside HUNDREDS other models.
Simple but very nice 2d wall art Frieren
The butterfly hair piece that Fern wears. There is a slot for a wire slide comb (purchased separately off of amazon) to fit that holds it to the wig. The suggested type of printer is MSLA resin, but if you use a FDM, I can't stop you.…
Fern's birthday present from Stark while the party is travelling. The mirrored lotus design is traditionally given to one's sweetheart…not that Stark knew of this at the time. This is for people who want extra props while cosplaying Fern…
Himmel's (replica) Hero Sword - Sousou no Frieren / Frieren: Beyond Journey's End This build uses a piece of ¾" Schedule 40 PVC pipe to attach the Hilt to the Grip . If PVC pipe is unavailable, print the Connector piece. The CloakClasp…
This is for people who want extra props while cosplaying Frieren. This prop is a small necklace with fine details. PRINT IN RESIN String a leather cord through the top loop to make it into a necklace.
This head is meant to fit a Dollfie Dream body (I used a DDP personally, but it should work with other sizes as well). It will likely be a bit loose because the rigid resin won't flex around the neck peg the way vinyl does, but I've found…
Model made for my Frieren figure from screenshot. Printed main disk in Fillamentum Clear PLA and details in Sunlu fluorescent PLA. Black light makes the fluorescent look great Working on stand…..
Je me suis basé sur ce qu'a fait "Objectif Ruche" et je pense avoir fait quelques améliorations. Une vidéo youtube de "Objectif Ruche" sur le gaufrier à cire : https://www.youtube.com/watch?v=3mqtKG7xrPI Les fichiers .stl sur…
A new 3D figurine generated by AI, a Chibi Frieren. Sorry for the poor print quality. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats,…
Chibi style model of Frieren walking with her suitcase. Two versions of STL uploaded, the only difference is blank eyes vs. modeled eyes. PRINTING Rotate 30° backward. Other orientations may work but I didn't try. Supports are required .…
GRIFF GEFRIERFACHKLAPPE für PKM Kühlschrank / Gefrierschrank KS823AUB ( KS82.3A UB ) 20867 KS82.3A+UB
Staff fits ¾" PVC Pipe. If printing the half versions, there are three small pins to help with alighting the two pieces. If printing the staff head in full, these are unnecessary. To assemble the staff head, either cut a 50mm piece of PVC…
A keychain of the anime "Frieren: Beyond Journey's End"
Enjoy ! Printing instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA…
A keychain of the anime "Frieren: Beyond Journey's End"
One Rail insert for the left and one for the right side. The door holder brake on the weakest position because the original material ( Polystyrol) is only suitable for -10°C. Use PETG - it should hold up to -40°C Use supports everywhere…
Handle for Nordfrost Freezer - might work for other freezers as well hole to hole distance = 140mm __________________________________________ Griff für Nordfrost Gefrierschank Lochabstand 140mm Print instructions Category: Replacement Parts
Dual color, start the print in white and switch to black in last few layers
I created this model so that I could wall mount the “Frieren Magic Staff” model created by @ICosplayInsanity . Please see their page for the original model. This is only the mount.…
A new 3D figurine generated by AI, a Eisen (Frieren). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Model for the details on Frieren her clothes from the anime Frieren beyond journeys end. Everything is split so that it can be painted and pressed together after this. The button bottom has 4 holes to sew it onto you clothes before…
The Golden City arc (my favorite so far as of Spring 2025) features Denken more prominently than in S1 of the anime. This is for that 1 cosplayer! I went with more of the manga design. I cannot wait to see this arc animated! This build…
Simple model, just slice and put a pause to change color at 13 layer Start with white than change to black.
2 poses I made of Luce wielding Frieren's staff. Message me if you'd like to see any additional poses, fixes etc.
Spare part for Bosch or Siemens refrigerator. Ersatzteil für den Kühlschrank Eisfach Türhaken 029963
it was a great approach to practice more about stylized anatomy, the model was entirely sculpted in Zbrush, rendered in Blender and composition made in Photoshop. Completely modeled for 3D printing, it was a great joy to work on this…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm uses 3 filaments: Black, Gray, White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Gray At layer #13 (1.12mm) swap to White for the rest.
Recommend a 0.2 nozzle or as small as possible. made for PLA
Frieren: Beyond Journey's End : Bust
Ein Ersatzteil für einen AMICA Kühlschrank. Muss mit Stützen gedruckt werden. Am besten in Nylon. PETG sollte aber auch funktionieren.
Tried to make it 1:1 as well as I could, including the size. It turned out Himmel must have had giant hands, so the handle is a bit dialed back, so you can actually hold it. Additional materials you gonna need: 100cm long 12mm outer…
It fits the Prusa mk3s perfectly.
Ersatz Griff und Feder für Gorenje Gefrierfach
Fern From Frieren. if you download it please like it too <3, it helps a lot.
Inspired by Frieren character, AI generated fanart sculpted in Blender.
This unique 3D model captures the subtle, delicate features of Frieren – a character inspired by magic and mystery. Perfect for fantasy enthusiasts and collectors of distinctive designs, the model showcases intricate contours and a…
Colors were done using Acrylic paint and alcohol based markers for finer details. If you have colored printing options, I would love to see the results.
I haven't tried printing this, but I hope it will be ok. I added a small support to his mouth to help the lid stay in place after printing. Maybe I'll make the lid separate to make it easier to paint.
Wohnwagenkühlschrank Federführung TK Klappe.
Description This is a 3D printable model based on FERN from Frieren: Beyond Journey's End. Follow me on my social media Twitter: https://twitter.com/FANMADE_NFT Insta: https://www.instagram.com/fanmade3d/
Frieren: Beyond Journey's End : Plaque
The gold, silver and copper coins seen in Season 2! Do you have an elf who cannot keep to a budget, has a debt and spends too much on grimoires? If your answer is yes, then the answer to this problem is to print out currency on your…
Hallo 3D-Drucker-Freunde, an meinem Gefrierfach ist mal der Türgriff, der gleichzeitig die Gefrierfachtür zu klemmt, ein Stift/Hacken/Halterung/Bolzen abgebrochen (wie auch immer das genau benannt wird). Daraus resultierte dann eine…
This model is a HueForge illustration of Frieren. Her heart may belong to Himmel… but she has mine. Two versions are included : 200x200mm 150x150mm (for A1 users) Print profiles are included for both AMS users and manual filament swaps…
Print in high resolution, 0.08 Start the print in white and insert a pause in last few layer. When the printer stops switch to black
Solitär's Sword(s) that she can summon at will. The final height of this entire print is just 4.8 feet (1.47 meters). This print requires ¾" PVC cut to 46" inches. This sword is massive and heavy and is quite the project and undertaking.…
Gedruckt mit PLA und 100% Infill
It requires support; the size is quite big so resize before printing to the desired dimension
0.2mm nozzle 0.08mm starting layer height 0.04mm layer height 4 walls 0 top layers 999 bottom layers (To speed up slicing) --- Color swaps 0.00mm-0.88mm - Elegoo Black 0.88mm-0.96mm - Overture Blue Gray 0.96mm-1.12mm - Overture Red…
Simple clip de verrouillage du gaufrier Lagrange Print Settings Printer Brand: DAGOMA Printer: Disco Ultimate **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 20 **Filament:** Dailyfil PLA Black mat Category: Kitchen & Dining
✨ Free DXF vector file of Frieren — the immortal elf mage from the award-winning anime Frieren: Beyond Journey's End ( Sōsō no Frieren ). A minimalist yet expressive silhouette capturing her flowing silver hair, pointed ears, and serene…
Another model of Frieren in different style to my previous uploads. Designed for both filament (FDM) and resin (SLA/DLP) printing. The model is separated into 9 parts uploaded as STL files . The difference between 2 head versions is…
Frieren themed ID Card / Badgeholder. Fits the standard badge size: 85,60×53,98×0,76mm (3,370×2,125×0,030in): ISO/IEC 7810 ID-1 (CR80 ID Card model) . Please use a 0.2mm or a 0.4mm nozzle with the Arachne wall generator enabled on your…
Ein einfaches Modell, zur Aufbewahrung von Gefrierbeuteln, einfach Gefrierbeutel oben reindrücken und bei Bedarf wieder entnehmen. Es empfiehlt sich, den Deckel zu kleben, damit dieser beim Gefrierbeutel entnehmen nicht wieder abfällt.
This is for people who want extra props while cosplaying Frieren.
verrouillage gaufrier/croque-monsieur Silvercrest Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: noname ABS - PC-ABS Category: Kitchen & Dining
Hier die beiden Clips für das Gefrierfach des Kühlschrankes Progress PKG1843 Achtung es sind 2 Teile (gespiegelt in rechts und links) Passend für 4mm Glasplatte Viel Freude damit!
Hier das Ritzel für den Ice Crusher des LG SXS Gefrierschrankes. Gedruckt in PLA, hat funktioniert. Viel Freude und Erfolg mit dem Teil
A 3-head-tall style model of Frieren in mining outfit based on a recent episode of the anime version. Printing Hair is separated from main body for supporting and painting reasons. Tilting is recommended for better facial features and…
It didn't turn out perfectly, but from a distance, it looks like Frieren. (;'∀') Print with 100% infill and a layer height of 0.08mm. Set the base layer to 0.16mm. Filament swap sequence:Initial filament: Black Switch to next filament at…
Gefrierschrank - Fix für Türgriff
I made a hinge for the fridge because the old one broke. i dont know where it all fits but its perfect for Körting fridges. if you like my design please like it Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
Crests worn by the Empire's Magic Special Forces in Sousou no Frieren (only manga as of fall 2024). Looking forward to seeing this arc in animated! There is space for a flat back pin if removability is necessary. Otherwise just glue it…
Druck ohne Stützen möglich. Perimeter: 3 Infill: Gyroid 50% Befestigung an der Tür mit doppelseitigem Klebeband.
Project: frierenlandscape.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x122.71mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed…
A highly detailed 3D printed collectible figurine of Fern, the talented and stoic young mage from the acclaimed anime and manga series Frieren: Beyond Journey's End (Sousou no Frieren). This stunning miniature captures her calm and…
A playing/collection cards case that closes on itself like a book. Made to hold the deck of 54 Frieren playing cards (with 64x89mm Ultra Pro sleeves) included with a Frieren collector’s manga edition. Print-in-place design (no assembly…
This build requires a 3/4" PVC Pipe, cut to length per cosplayer's height. Print all the pieces and glue together with 2-part epoxy. When working on the staff head, slide three free-spinning rings through the center
plate/logo frieren bicolore pour décorer cotre coin manga. Pour imprimer en bicolore sans AMS il vous suffit d'ajouter une pause a la couche 11 (impression en 0.2) et de changer le filament a la pause
The Borshaft bottles seen in season 2. Drinks are best enjoyed with friends.
A simple replacement part to hold the freezer-door in place. I had to re-drill the hole in which the door pin is held with a 9mm drill, because it's a bit too small and you just want a clean surface for the rotating pin. Printed on the…
Freezer drawer labels for 6 different categories of food. They are 4x20cm - feel free to scale down if they dont fit the fronts of your drawers. Glue them onto the front of your drawers by some soft double sided tape (remove any water/ice…
Ein Adapter um beim Abtauen des Gefrierfachs/Gefrierschrankes das Tauwasser abzuleiten.
On Beko fridges the door for the freezer compartments seem to brake often 🤷♂. On our device this happened once within the warranty (after 9 month of usage) and then again after 2 1/2 years. When looking around in the internet for reviews…
Inspired by the Goddess of Creation necklace worn by Kraft and Fern from the anime Frieren: Beyond Journey's End. Perfect accessory for Ren Faire! I printed mine in two parts with Amolen wood PLA and glued them together. I recommend…
Chibi Frieren from Frieren: Beyond Journey’s End, sculpted as a cute collectible figure and ready for 3D printing. STL file included.
Da diese Dinger immer wieder abbrechen, habe ich ein noch intaktes in cad gemodelt und ausgedruckt. Hält prima :)
It didn't turn out perfectly, but from a distance, it looks like Frieren. (;'∀') Print with 100% infill and a layer height of 0.08 mm. Set the base layer to 0.16 mm. This print uses three types of filament. Filament swap procedure:Initial…
It didn't turn out perfectly, but from a distance, it looks like ubel. (;'∀') Print with 100% infill and a layer height of 0.08 mm. The base layer should be 0.16 mm. Filament swap procedure:Initial filament: Black Switch to the next…
It didn't turn out perfectly, but from a distance, it looks like Frieren. (;'∀') Print with 100% infill and a layer height of 0.08mm. Set the base layer to 0.16mm. Filament swap sequence:Initial filament: Black Switch to next filament at…
plate/logo frieren bicolore pour décorer cotre coin manga. Pour imprimer en bicolore sans AMS il vous suffit d'ajouter une pause a la couche 11 (impression en 0.2) et de changer le filament a la pause
Project: frierenlandscape.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x122.71mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed…
