Liczymy pasujące modele…
Inspired by JordanKs design, yet remodelled from scratch. Can hold the EU plug and 2 SDs tidily. Can also work as a stand. No warranty if it damages your Deck, though. Have fun.
Discord: https://discord.gg/kHFhCXZnxb GitHub: https://github.com/Rolls17/BugBu Print parts as oriented. Part description will tell you quantity and if supports are needed. All parts designed for 0.2mm layer height, 6 walls minimum, and…
Introducing the "BagBuddy" – The Ultimate Bag Holder for Every Task! Tired of the frustration of holding a bag open while trying to fill it? Whether you're tidying up your home, tackling a big garden project, or managing waste at an…
Drop in and Adjustable only change I had to make was my X had to be Changed to -35 from the default -28. Just be sure to double check! Will need 2 x M2.5 x 10 and 2 M2.5 nuts for mounting.
The BugBu 260 has a printable area of 235x235x300 unless you slap on a Bambu build plate, then you get 260x250x300 build volume. This uses a cantilever bed to eliminate the closed loop belt system. All part are printed at 6 walls and 20%…
This is an upsized version of the BugBu 210 that uses an ender CR-10 24v heated bed, and gives a printable area of approximately 310x300x310. Just like the smaller version, this is a work in progress. This larger printer does require…
Based on the great work by mvasilakis (https://www.printables.com/de/@MVasilakis_835 and https://www.thingiverse.com/thing:3550867 ) I remixed the scope lever to fit on my utg bugbuster 3-9x32. It's thinner, the opening is different and I…
You might need slightly longer pcie screws depending on your case.
I have mixed feelings about their recent use. It was not without reason, nor will it be without consequence. I did not create this model to express political opinion in any way. I do, however, find the GBU-57 MOP to be an impressive…
Big thanks to https://github.com/Rolls17 for the Design, Development of the Printer and the support for this conversion. Edited from the Voron Legacy Afterburner Carriage. Credits to: https://github.com/VoronDesign/Voron-Legacy
Here you have the cutest bunny for your easter decoration. Bun-Bun will be the favorite on your easter hunting. you can decorate any space you want or even give it to your kids as a price or special item in their easter hunting. The model…
NOTE: Z Rotation Distance Will Need Changed From 8 to 13.1 For This Mod In The Config This mod will convert your BugBu 210 or 260 to a belt driven bed instead of triple lead screw driven. This mod will use all of the existing non printed…
I extended the Caliburn C4's butt by about 39mm to feel a little more comfortable.
Printed in silver PLA. Wing rotates, just like the real thing (use a 3mm screw).
Here is the model for Eggburt Bear. Eggburt is a good Friend of Barry, and Just like Barry would like to be your friend too, do you have space for Eggburt Bear? maybe he can keep Barry Company. I hope you enjoy, Thanks Bugman If you like…
The nozzle can be 3D printed but not the manifold section. It is too porous and will leak. I would recommend making the manifold section from a metal block, then drilling and tapping holes and threads. Nozzle Bore Diameter 2.2mm Nozzle…
These magnetic building toys use 8x2mm magnets. Print the tips in two colours so you can keep north and south staight and you know which ends will attract each other. The balls need to be magnetic. You can use steel bearings or print…
Das Model dient dem Aufrollen eines Logbuchs um dieses besser in einem Standart PETling stecken zu können und es leichter aus seinem Behälter zu entfernen. Das Modell besteht aus 3 Teilen die Ich in einer STL Datei verstaut habe die…
This is a remixed mount for the CR Touch in a BugBu 3D printer.
Da mir meine erste Version des Logbuchaufrollers zu umständlich in der Montage vorkam habe ich Ihn um eine Rastfunktion erweitert außerdem gibt es das Mittelteil nun in 2 Längen. Ubdate 11.5.2025 Ich habe mir das lange Mittelteil…
Printed at 0.2 layers with 10% infill, no supports. While intended as a test print for the BugBu printer, feel free to try it on anything.
DEUTSCH: Hallo Füchse, wir hoffen, dass es euch allen gut geht und ihr euren Uncl0ggbuddy in vollen Zügen genießt! Wir haben eine STL-Datei erstellt, mit der ihr eurem Uncl0ggbuddy eine Sicherheitskappe verleihen könnt. Ihr könnt nun eure…
Remixed the Mantis XOL Toolhead to fit a dragon hot end and mount to the bugbu. Follow the instructions here: https://github.com/Armchair-Engineering/Mantis-Xol/blob/main/Assembly.md None of these parts should require supports.
If you don't want the loose power switch box in the files, you can use the foot. It will replace one back foot, and you can install your switch in the foot. There is a cover as well so electrical connections are not exposed.
Have you ever had sliding bags during a rough car ride? Well, the BagBuddy will solve your problems! In a car, the BagBuddy hooks onto the headrest rod on the seat in front of you. It has a smart design keeping the print time under 3…
Instead of putting the tokens in bags, sealing up the bags and packings the bags, only to reverse the process when it's time to play, I made these simple lids to keep things in place, even if the box is storred vertically (or even upside…
This mod is ONLY for the 310 version of the BugBu. Just replace the same name parts from the BugBu 310 list with these parts to go tall. You will also need 2 - MGN12 linear rails for this mod. The linear rails will need to be 50mm shorter…
Was Inspired by LilMikey's work on the Tronxy to create a bed system leveled independently using Magnets and M4 balls. Eventually ended up mixing bits of Simplecore, the Voron Trident, and the original rail mounting method for the 260's…
Introducing the new and improved BagDuddy (I had to use the same type of title and the same description to respect the original model by FusioN.) Tired of the frustration of holding a bag open while trying to fill it? Whether you're…
Wir haben uns ein UTG Bugbuster (3-9x32 AO) zu gelegt für eine kleine Luftpistole. Leider fanden wir im Internet keine schönen Abdeckungen, die uns gefallen haben, oder die gut gepasst haben. Also habe ich ausgemessen und es in Fusion 360…
4 walls 20% infill attach the mount to the toolhead before the orbiter
Adapter to fit Accushot sidewheel on the Bugbuster 3-12x32. Remove center rubber piece and replace with this.
Modded stepper mounts to fit W-Jack between the motor and the frame so you can tension the belts a little. You unscrew the motor a little and then use the screw on the side of the motor mount to tighten the W-Jack which moves the motor…
BugBu project I like the original design but I wanted to use this toolhead on my BugBu-ed Flyingbear P902. Added long holes for Bu's X carriage. This toolhead looks chunky but with P902 frame and BugBu hardware the 235x235 bed fully used.
Exact track of the Nürburgring Nordschleife Gesamtstrecke based on real satillite data. Model can be used to hang on a wall for example. 💬 Questions & Custom Requests If you have any questions or need help with this print, feel free to…
Split of the Cant Bed Mount to fit on a smaller build plate. print in loaded orientation with regular supports touching buildplate. Glue with ca Glue and use screws to locate and clamp. do not remove screws. 1.0 - added through hole and…
Replaces the X carriage. Carriage bolts together with M3x25 from the rear. Dragon Burner mounts to the front. Sherpa mini mounting. to mount stepper to the rear, use sherpa spacer., otherwise motor will face front. need: 8 m3x4x4 heatsets…
This is my take on Rooster Cogburn from True Grit. You may need to rescale this design to fit your needs
I do not have a RPi 4 to use with the original backpack, so I split it in half and kept the motherboard portion. Same port position and holes out the top. Done with permission from the creator of the BugBu series. Rolls17. Go check his…
Prints fine on a BugBu 210 printer. Designed to hold a Meanwell 5v 5 amp PSU to power the Raspberry Pi on the BugBu printer. I was constantly getting “Undervoltage Detected” errors on my Pi when connected with a buck converter through the…
With the extruder I chose to use on my bugbu260 build the original bltouch mount left my crtouch sitting to low, so the simple solution to a simple problem, make the mount shorter. I have made 2 versions of the original design: V1-…
Diseño para una lámina con relieve de la carátula del álbum 'Gangbusters' del grupo Caravan Palace.
Nozzle thread = M12 @ 1.75mm pitch Pipe threads are both 1/8 BSP
Simple adapter designed to facilitate mounting a FogBuster Bolt-on Mount (P/N 00315) to 20mm extrusion using a M5x25mm machine screw, a M5 washer and a t-nut appropriate for the extrusion. The extrusion pictured is 20mm OpenBuilds V-Slot.…
This is a Z-Axis Assembly to hold the Anet A8 bed in the Bugbu Core XY printer. For this to work you need to use 300mm lead screws and linear rods or you cut the Anet A8 ones to size :) you need to print every part twice. Some tolerances…
This is a Bowden Toolhead for the Bugbu Core XY printer. It uses the “standard” V6 cooling fan and mount (that blue thingy). The fan shroud attached to the repo is a bad CAD reconstruction of the BiQu Hurakan fan shroud I had laying…
Built in the true RepRap spirit of continuous development, this custom toolhead for the Bugbu printer ecosystem is engineered for absolute reliability, precision, and high-speed performance. This design completely replaces the traditional…
Box für 8mm Schlagbuchstaben und Schlagzahlen 330-008 Schlagzahlen-Satz 8 mm Schrifthöhe 12mm Schaftbreite, 58 - 61 HRC Härte und 331-008 Schlagbuchstaben-Satz 8 mm Schrifthöhe 12mm Schaftbreite 58 - 61 HRC Härte Optional Stab mit 10x5…
Box für 4mm Schlagbuchstaben und Schlagzahlen 330-004 Schlagzahlen-Satz 4 mm Schrifthöhe - 8mm Schaftbreite, 58 - 61 HRC Härte und 331-004 Schlagbuchstaben-Satz 4 mm Schrifthöhe - 8mm Schaftbreite 58 - 61 HRC Härte Optional Stab mit 10x5…
Minimalistic and satisfying to use soldering fume extractor Parts list: Fan - 70x70x25 , 12V Cells - 3x li-ion 18650 (any brand will do) / buy 3S1P battery pack Magnetic connector Screws - 4x M4 (35mm long) + nuts (you may need to shorten…
easy to print raises charging cube to provide space for cable allow cube to access usb-ports from top
Replaces the X carriage. Carriage bolts together with M3x25 from the rear. Dragon Burner mounts to the front. Sherpa mini mounting. to mount stepper to the rear, use sherpa spacer., otherwise motor will face front. need: 8 m3x4x4 heatsets…
This is my take on Rooster Cogburn from True Grit. You may need to rescale this design to fit your needs
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Replica MK82 GBU Toy bomb for use in airsoft games to replicate large drone munitions.. I don't remember where I got the original design but I changed it so you can print it out on a small printer. Can carry up to about 10 lbs of sand in…
3D printable topographic miniature of Seoul, Seongbuk (Korea Univ.) - 🇰🇷 South Korea Capture the beauty of Seoul, Seongbuk (Korea Univ.) 's city landscape with this topographic miniature! This 3D model represents the geographic area…
3D printable topographic miniature of Siegburg - 🇩🇪 Germany Capture the beauty of Siegburg 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.795, 7.208 (LatLng) .…
Unscrew your minimalist IKEA Bangbula, put this in and make it twice as useful!
This mod uses a 60mm bolt instead of 25mm. allows pulleys to be serviced without removing part from printer.
In honor of my favorite band -- Caravan Palace - Gangbusters Melody Club Robot head from the album cover. Images are of the small version with the color changes in the 3MF file. Start with black, then the green, then yellow/gold eyes, and…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
