Liczymy pasujące modele…
Minor adjustments to my previous design, the Deutsche Bundesbahn Gls205/Gms54 Guterwagen (https://www.printables.com/model/181948-deutsche-bundesbahn-gls205-gms54-guterwagen-gauge-) have resulted in this very similar Gmhs53. 11NOV2018:…
A proof of concept for sharpening gravers using the GRS style sharpening jig. The jig slides on a pillar which means it holds the angle independent of height and stick-out so might be better for electric sharpeners. I used a 10mm steel…
This is my try to recreate the shield in OpenSCAD, because with this Program anything is parametric. So this model can be changed very easy. In particular I designed this, because I liked the sturdy of the prusa shield, but in the same…
I own a lot of GRS equipment, and I wanted a way to store my equipment off the bench without buying a bunch of wasted and expensive steel dovetail mounts, so I modeled this so I can screw it into the wall and mount my not-in-use GRS…
A wall hanger for the TSO GRS-16 PE Parallel Edge Guide Rail Square
I needed additional collets for the Jura by GRS inside ring holder because I drill into them a lot and abuse them mercilessly. This way I can print new single ones without having to buy a whole new set each time to get the ONE I generally…
Hey! This is my first thing ever designed. I use it in my worksop and find it very usefull! I printed it with PET G and it helps me organizing those little GRS quick changers without paying 20 bucks. Enjoy and glhf with jewelry making <3
This is the bracket if you want to hang your Guide Rail Square 16 V2 on the wall or inside a cabinet door
Intended to fit the GRS button hole spinner set. https://thunderstickstudio.com/collections/spinners/products/usb-spinner Only 150x90x45mm size so should fit any 3d printer. Uses four M4x12 countersunk screws to secure the bottom cover.…
There are other hooks for the TSO GRS-16 PE track saw squares but they seemed clunky/harder to use. This includes a curve so its easy to slide the square's edge on until it snaps into place. This is also designed to have only two screws…
Used specifically for the new v2 model however it should work fine with the previous models. Semi-remixed from https://www.thingiverse.com/thing:6061324
Update 2025: STL files now available! This is my version of the Paperboy arcade machine handlebars, it is purely for steering and has no other functions... yet. I could modify it so that it has the fire buttons for throwing papers and…
This is a holder to store all the equipment that comes with the Jura by GRS QC basic set.
UPDATE: Please find the rest of the project files here: https://www.thingiverse.com/thing:5319457 Here is my take on a (single print) set of motorbike handlebars, to fit the GRS USB Button Hole Spinner. I made this to use on MAME's…
Learning to CAD is still a work in progress for me, so I probably spent about 20-25 minutes working on this in Fusion 360 with most of the time spent getting the compliant section sized and shaped how I wanted it to be. It was purposely…
I scoured all the major model sites for bit holder for my beloved Bosch PS21 Driver. I printed out a bunch, but many were not the same drill model, or required magnets to be glued during the printer or after. The original model that this…
Replacement cup for GRS make citrus press. The cup fits into the base funnel. Printed without supports.
I designed a replacement cover for the rear Picatinny rail of the GRS Bifrost gun stock. I did not like the Pica rail and the grip of it when stabilizing the rear end when shooting seated. This gives you clean look and great control over…
I own a lot of GRS equipment, and I wanted a way to store my equipment off the bench without buying a bunch of wasted and expensive steel dovetail mounts, so I modeled this so I can screw it into the wall and mount my not-in-use GRS…
Couldn't find a steering wheel for the GRS USB Button Hole Spinner so I decided to make one. After making the wheel I've decided to make a CP for it separate from my Bartop arcade. Important: I used this Spinner for my Steering Wheel.…
Just printed a bunch of JGR Shoe Organizer and wanted to make it a bit more tidy where I have them and not slide around. No filets or chamfers, really just a blocky clip, but it works great and wont be seen anyway. Obviously just for the…
Printed in PLA with .4 nozzle, didn't have any issues and the GRS panels snapped in--your mileage may vary..
STL Versions now available - One of my early projects and I find some parts of the construction embarrassing but it works. Print them face down. If the curve gives you issues, bury the model into the bed a little to lessen the curve…
230311 Printer paper stand (Dual, 500 sheet 80 grs) In order to make some space on the shelve I put the paper for the printer vertically so the laptops also fit on this shelve within reach. Can be mounted with 3,5 mm (1/8") screws.…
Included are three apertures corresponding (more or less) the sizes offered by Williams for the WGRS-54 peep sight. If printer tolerances are OK, it'll thread right in. These should fit any other peep sight that uses the same 7/32-40…
Handy storage wheel rack for engravers or anyone who use 5" diamond laps. Curved bottom fits laps securely.
I designed this for my GR10 fully 3d printed headphone. The headphone by the way, you can get it here: https://cults3d.com/en/creations/gr10-a-fully-3d-printable-headphone-converter-for-koss-ksc75-ksc35-portapro-e
This is the very 1st time I made something that I thought others could use and enjoy. If you know what this is you are a Jeweler. The problem is with the GRS system you have things on top of your bench, this gets the GRS family of things…
Here is a simple tool holder for the GRS-16 square that fits the Festool rails. The holder screws to the plywood tool wall using 4G screws. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter **Resolution:** .4mm Infill: 15%…
