15 modeli
Zyxel GS1200-8 10 inch rack mount, remixed from the excellent model by Chillora. The remix introduces rounded corners and a centered slot to match the “rounded” rack look. Recommended to print in PETG for high thermal environments with…
There are already a few 10 inch rack mounts for Zyxel GS1200-8 (and GS1200-5), but this one has some unique features: As slim as possible, to squeeze it into small spots. The holes fit between the 0.625 inch and 0.500 inch sections…
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 10 inch rack. The mount is 1U high, and the switch mounts flush with the front. The total depth when mounted in the rack is no more than then depth of the…
A holder to mount a ZyXEL switch onto a Skadis board. To mount the holder to the peg board, use these T-nuts .
Mount Zyxel GS1200-5HP v2 in 19inch Rack
I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…
Support pour ne pas gêner la sortie d'air de la Livebox dans ma baie de brassage. Support so as not to obstruct the air outlet of the Livebox
1:1 Nachbau der originalen Einfädeltaste
Dieses Teil wurde modifiziert um ein ausbrechen des M3 Gewindes für die Umlenkrolle zu verhindern. Außerdem hat es im Filmkanal eine eckige Aussparung für die Aufnahme einer Reflexlichtschranke DY70. Das Kabel für diese Lichtschranke kann…
I needed something that can fit both network devices so i combined them :)
1U 19'' Rack Mount for Zyxel GS1200-8HP Managed Switch and its Powersupply
Multiboard mount for a Zyxel GS1200-5HPv2 5 port managed POE switch. Parts for both the switch and the power supply. You will need to print two of each. Printing Guidelines: I printed using standard Multiboard settings. Use 3 perimeter…
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 19 inch rack.
Fits: Zyxel GS1200-8 — 155 × 85 × 26 mm. Print settings Print it face down — front panel flat on the bed, tray pointing up. This is the one thing that matters. Printed upright, the top edge of the cut-out becomes a 157 mm unsupported…
