Liczymy pasujące modele…
I have created a simple CAD model of the P - 2 Peacemaker This is my first model in this direction, so I don't have a lot of experience yet I would be very happy about feedback as I said I don't have much experience yet and if there are…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
This is the fan art of B01-Tactical armor from Helldivers2. The item is a .stl file for a chibi character, designed for 3d printing. Feel free to edit and use it as you wish. Also check out the mechs you can sit the little guy in! EXO-45…
takes some 1/4 in rods for the handle and rod for the hinge. could use 6mm x 2 mm magnets for the mag as the hole is around 6mm/0.24 inch. had a removable mag, and is split for printing. Category: Props
Helldivers II Mech using Dummy 13 joints and frames
For Super Earth! G-123 Thermite Grenade Are pesky Hulks turning your squad into paste? Are Shredder tanks treating you like last week’s ration pack? Fear not, Helldiver! The G-123 Thermite Grenade is here to light up the battlefield—and…
I built the revolver in pieces to print easier. The grip has an outline to add the texture of gripping if you wanted to. The way I have the STL set up is the best way I find to print. Please contact me if you may have any questions. Have…
I don't have any instructions on how to best print the model
split for printing, takes some 1/2 in dowel rods. Category: Props
original SolidWorks files are available, along with 3mf and stl files. supports needed
🇬🇧 Small MOLLE Clip – Servant of Freedom (Helldivers Inspired) A small MOLLE clip I designed for my airsoft gear, inspired by the Servant of Freedom player title from Helldivers . Dimensions: 60 × 32.5 × 3 mm (MMU/AMS version) Non-MMU…
These beads are based off the Helldivers 2 skull icon used in a variety of places. I've included flat and faceted variants, and ones with a nose-hole and without. It prints well at 0.2mm layer height, I went for 3 walls and 20% infill but…
Helldivers MX Keycap printed with Black and White
split in 2 and a hole for 1/4 in dowel, Category: Props
needed this for my helldiver cosplay so here it is. takes a 1/2 in rod. Category: Costume
This 3D-printable Hellbomb keychain is the perfect accessory for fans of Helldivers 2. Inspired by the powerful orbital bomb used to decimate enemies, this keychain features a sleek and recognizable design. Lightweight and durable, it can…
Automaton Coaster: This Automaton coaster has been granted to the automatons as morale support from Joel after their many losses against the Helldivers. However, some Helldivers have intercepted this blueprint and used it themselves as a…
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
Helldivers Key chain and Wall Hanger Made with love for democracy & super earth! 3 kinds of wall holders, Helldivers logo, Helldivers ll logo and Super Earth emblem. Keyholder can hold up to 4 Stratagems . There are 7 different Stratagems…
Bust of a Helldiver from Helldivers. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Make sure to check out my new patreon, it's completely free for now and should…
A G-10 Incendiary Grenade from Helldivers 2. I've split this model up for easy printing with minimal overhangs, with .25mm tolerance between parts (my go to for my X1 Carbon). I've also included the full body as one object. This was CAD…
split for printing takes a 1/2 in dowel. theres an option to haev a magnet removable mag, using 6mm by 2 mm magnets. Category: Props
Added a badge for HD2 for this controller stand. Model is 39.96 as recommended in the original model. I had to shrink it just a bit to get it to fit. Insert color change above 10.00mm if you want the skull to be a different color.
I designed this coaster completely from scratch in Fusion 360 using the coasters originally made by H3RBSKI on MakerWorld (link below) as inspiration. His set didn't include the AMR, so I made my own to go with the rest of my set. The…
I've not played Helldivers, but I like the flag so here it is. No Commercial use. I don't own the IP, you don't own the IP.
have a solid static version and one that is split and takes some 6mm x 2mm magnets to allow the buttons to have resistance if the magnets are reversed. Category: Props
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
Helldivers keychain, 2-color .3mf
designed for the arms to move, split for printing. all parts are snap fit, but may take some force. Category: Props
Just a simple multicolor coaster (non multicolor version coming soon)
This is for galactic armory Hellbomb prop cosplay. you need to print 3 mounts. but i recommend you print 1 lcd mount to make sure it fits in your Hellbomb. it should fit in all 3 spots. the 2 parts are glue together after installing…
Edit: V2 was re-created from scratch with more polygons on curved edges. I haven't printed it but don't see any errors in the model in Cura. I've heard stories of the infamous Malevelon Creek, I joined the Helldivers after it was…
needed this for my helldiver cosplay so here it is. takes a 1/2 in rod. Category: Costume
3D Print Files in STL format of a Helldiver Controller Holder The figure stands at 226mm tall and includes a lot of different features: - 2 versions of the base model: 1 with cape and 1 without - 3MF file with full color data for…
This Eagle 500KG Bomb keychain is a 3D-printable tribute to the devastating airstrike stratagem in Helldivers 2. Designed for fans of the game, this keychain features a crisp and detailed cutout of the Eagle 500KG Bomb icon. Ideal for…
This 3D-printable Hellbomb keychain is the perfect accessory for fans of Helldivers 2. Inspired by the powerful orbital bomb used to decimate enemies, this keychain features a sleek and recognizable design. Lightweight and durable, it can…
The Mortar Sentry keychain is a must-have for Helldivers 2 fans who rely on automated firepower. Inspired by the in-game stratagem, this 3D-printable keychain captures the essence of this essential turret. Attach it to your keys,…
This Reinforce keychain is a tribute to one of the most vital stratagems in Helldivers 2. Whether you’re reviving fallen teammates in-game or showing off your dedication to the Helldivers cause, this 3D-printable keychain is the perfect…
Simple ball joint structure and once completed should look like the one from the game
This is a simple 3 part container for my mini13 Helldiver so they dont get lost
takes 1/2 in rod for the lengths and 1/4 for the handle and pin. Category: Props
Just a simple multicolor coaster (non multicolor version coming soon)
A 3d printable poster of the Automaton propaganda. Clanker scum. Made with Hueforge.
have a solid static version and one that is split and takes some 6mm x 2mm magnets to allow the buttons to have resistance if the magnets are reversed. Category: Props
takes some 1/4 in rods for the handle and rod for the hinge. could use 6mm x 2 mm magnets for the mag as the hole is around 6mm/0.24 inch. had a removable mag, and is split for printing. Category: Props
This is for galactic armory Hellbomb prop cosplay. you need to print 3 mounts. but i recommend you print 1 lcd mount to make sure it fits in your Hellbomb. it should fit in all 3 spots. the 2 parts are glue together after installing…
another remake of an older model. used 1/4 rod/dowel for the cylinder and support and some 6mm x 4mm magnets for the cylinder's bullets so that it snapes as you rotate it. Category: Props
a holster to mount on your helldiver thigh plate. screw the dove tail on your tight plate and then you can slide the holster onto it. the dove tail works for the talon and senator holster(v2 of both of the guns of my model) (dovetail for…
a holster to mount on your helldiver thigh plate. screw the dove tail on your tight plate and then you can slide the holster onto it. the dove tail works for the talon and senator holster(v2 of both of the guns of my model) (dovetail for…
I've not played Helldivers, but I like the flag so here it is. No Commercial use. I don't own the IP, you don't own the IP.
split for printing, takes some 1/2 in dowel rods. Category: Props
split for printing takes a 1/2 in dowel. theres an option to haev a magnet removable mag, using 6mm by 2 mm magnets. Category: Props
Use pen springs for button press so that it can spring back up and for the needle to retract and attract. If you find a problem with any of the design, please notify me in the comments or at [email protected] version 1 of stim:…
To assemble align wing holes with holes on the body. Then push a pin all the way through. This will hold it in place. The main body can sit on the provided stand. Over time the wings may droop due to gravity, to fix this you can reprint…
Bust of a Helldiver from Helldivers. Comes pre-supported for resin printing but completely FDM printable. Photography and supports by the amazing Charro Zuck. Make sure to check out my new patreon, it's completely free for now and should…
designed for the arms to move, split for printing. all parts are snap fit, but may take some force. Category: Props
split for printing. designed for the arms to be snap fit and the props to be able to spin. has a holes for a 1/4 in wood/metal dowel for alignment. Category: Props
TAKES SOME 1/2 IN ROD AND IS SPLIT FOR PRINTING. Category: Props
I elevated the areas that need to be white so that you can preform a color change at that layer. Printed well with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red: Layers 23-45 White: Layers 46-48
I elevated the areas that need to be white so that you can preform a color change at that layer. I Printed the 500KG Bomb remix I did (same thing just different plaque) with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red:…
I elevated the areas that need to be white so that you can preform a color change at that layer. I Printed the 500KG Bomb remix I did (same thing just different plaque) with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red:…
Multiple designs: -offset pattern (-0.8mm) -assembly (for multi color printers) -individual parts (for single color printers, 0.1mm tolerance) -3mf file -DFX
Design avilable with or without text (on pictures) Assembly available for multi color printers
turn you dummy 13 into this epic helldiver dummy. that is a perfect addition to your dummy 13 collection. you will need to make the frame pieces.
Firstly, All credit for this model goes to Arrowhead Game Studios & Sony Computer Entertainment My son is a big Helldivers 2 fan and I originally sought and found a model but unfortunately after repeated attempts (printing it upside down)…
The OBJ and STEP files can be separated into individual parts using the “split into parts” feature fund in most slicers. Youll need some parts to assemble the P-11: 14X 6x2mm round magnets 1X 3 mm x 7 mm x 3 mm ball bearings 1X 22 mm x 22…
This is a Coaster Cover inspired by @Tripwire_586192 ‘s design made to fit @H3RBSKI's stratagem coaster set . I completely remodeled this in Fusion 360 which is why I'm posting it as an original design and not a remix. The issues I had…
Miniatures in 1:48 scale of a variety of Helldiver miniatures! Please follow the link in the PDF for the full files, there are so many I couldn't upload them all here! 20 poses included as well as 7 different swappable helmets. Some poses…
Check out my cults3d page, it has a lot more files https://cults3d.com/en/users/ItsTheBot/3d-models 5/20/25 - Added 6 new minimap markers
I printed it with 0.2mm nozzle for highest fidelity, but a 0.4mm nozzle will work with Arachne perimeter generation Magnet of the 500kg bomb stratagem from Helldivers 2. Holes on the back are made to fit 2 of these magnets.…
Made a version of my headphone stand for a friend of mine who is really into Helldivers II and though some of you out there would like it as well. Enjoy. Assembly is pretty straight forward: Pillar goes into base recess. (depending on how…
Join the ranks of the legends by printing this glorious tribute to bravery and sacrifice! These 5 shining stars and the powerful Outstanding Patriotism message immortalize the excellence of a true Hero of Super Earth. Perfect for…
A plaque for the jet pack strategem from Helldivers 2. Made for a friend who enjoys flying through the air a concerning amount. You know the type. Printed on a mini+ but if you have an actual multi material printer it will be much easier.…
Helldiver 2 stratagem key cap for a mechanical keyboard.
Helldiver 2 stratagem key cap for a mechanical keyboard.
Helldiver 2 stratagem key cap for a mechanical keyboard.
Helldiver 2 stratagem key cap for a mechanical keyboard.
Helldiver 2 stratagem key cap for a mechanical keyboard.
Helldiver 2 stratagem key cap for a mechanical keyboard.
Helldiver 2 stratagem key cap for a mechanical keyboard.
Edit: V2 was re-created from scratch with more polygons on curved edges. I haven't printed it but don't see any errors in the model in Cura. I've heard stories of the infamous Malevelon Creek, I joined the Helldivers after it was…
Pre-ordered the HD2 themed PS5 controller so I wanted a cool stand for it. Found 2 files by some talented designers and merged them together & this is what I came up with. *Also works with PS4 & Xbox controller, see images. Layer height:…
Simple stamp based on vector logo, can be used to stamp things. Final effect will depend on haw you'll press it, which and how much paint will be used. Try it first on test surface, that will be similar or the same as the final one. Based…
one of the best stratagems from the game. takes a 2.5 in tube and a 1/4 in rod. prints in 4 plates of pieces for smaller printers. Category: Costume
Thanks for spreading the democracy. https://www.reddit.com/r/Helldivers/comments/1ave9y8/i_made_a_democracy_propaganda_poster/?tl=de&rdt=44897 Print at 15% infill with a layer height of 0.20mm White until layer #5 at 1.0 mm Red until…
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
