Liczymy pasujące modele…
This cute hermit crab model can be printed without a border and is designed to play with or display; the eyes can also rotate. This is a moving hermit crab that is wonderful to print. It was also tested with a border and comes off…
Tips for printing: Filament: PLA Supports: Only for the Full Shells! Don't use supports on the other models! Layer height: 0.16mm (optimal) Wall loops: 3 Infill: 15% Seam position: back Wall generator: classic Detect thin walls: No! Brim:…
ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…
My friend upgraded her hermit crab enclosure so I upgraded my original pool model with a bubbler attachment. I still no nothing about hermit crabs so let me know if theres a way to improve it!
It's a simple tilt-a-whirl, merry-go-round, or wheel for your pet to run on. I kept seeing these on Etsy and decided to design my own. To cut down on non-3D printed parts, I did not use bearings, but it still spins very well. For the…
A hermit crab water dish that goes on the surface of your substrate. I made the steps 0.5cm tall each for easy measurement of water depth. It fits ~1 cup of water pretty nicely, but you may want it shallower if you're concerned about tiny…
This was a fun little project I made. I wanted to make another food dish but with a cuter style. Initially, I made the one with only the little triangles and it looked like a sun in the middle which I really liked. Then I played around…
I printed this originally in PETG but I'm sure PLA would be fine. I had to use supports to support the arch. Let me know what you think. I know nothing about hermit crabs. This will probably work for hamsters and other rodents as well.
This is a fun and creative way to keep your hermit crabs moving all night long. This climbing toy has a base and a disc on top that when assembled correctly, will spin freely for your hermit crabs to walk on. I made multiple designs and…
Hermit Crab Shell (Time Shale) home. 20mm ++ opening. updated timeshale.stl. (12/21/22) Old versions removed : the process of fixing the mesh mistakenly filled the interior. The new model timesale.stl has the interior removed and…
I just wanted a way to make the input wires area a little more clean looking so I whipped this cap together. The screw holes are a bit undersized so I could drill and tap to fasten directly into the material. Print Settings 0.2 layer…
Platform originally made for my friend's hermit crabs, but can work for a number of small critters. I printed this on a P1S. It works best being printed upside down with the ramp along the back of the printer. Tree supports recommended.
A model of articulated hermit crab with movable limbs, claws, body sections, etc. The print-in-place crab and the spiral shell are separated. There are snap-fit structures on parts themselves for assembly. Supports are not required. The…
I wanted to make a food dish for my crabs that had different sections so I can see what they like. They really love popcorn so I made the center section as a kind of treat section and then the other main sections for hardier foods. I…
Large climbable corner structure for hermit crabs with removable tray at the top. Add foraging material in the tray and it is easy to remove and clean or empty. Structure is approx. 165x158. I recommend printing with PETG due to the high…
For Super Earth! G-123 Thermite Grenade Are pesky Hulks turning your squad into paste? Are Shredder tanks treating you like last week’s ration pack? Fear not, Helldiver! The G-123 Thermite Grenade is here to light up the battlefield—and…
A fun articulated hermit crab figurine made in a detailed 3D printed style, featuring a textured shell, flexible segmented legs, and a bright coral color that makes it stand out right away. This playful collectible brings a beachy, quirky…
I designed this as a climbing stick/log for my friend's hermit crab. I would imagine it could be used in various other animal tanks/cages. It is about 12 inches (305mm) long and 1.5 inches (38mm) wide. I printed mine with fuzzy skin. I…
WIP: This model is still a work in progress. I remixed https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion to work on the stock hotend carriage for the BIQU Hermit Crab. Everything “should” be the same as the…
Full Model of the BTT hermit Crab V2 canbus edition. All PCB credit goes to BTT and can be found on their github https://github.com/bigtreetech/HermitCrab/tree/master/HermitCrab2/3D - All other parts (except screws) modelled by me.…
A super basic hermit crab water dish that assumes you'll be putting it slightly lowered into the substrate. I made the steps 1cm tall each for easy measurement of water depth (since you don't want it too deep for tiny crabs). I originally…
Magnetic Flexi Hermit Crab This is an articulated hermit crab with swappable magnetic shells! There is a pause to add hidden 8x3 mm magnets in cavities on the tail so the crab can securely swap between different shell styles. Features…
A friend of mine needed a hermit crab pool, so I designed this. In order to make it water tight I would suggest using PETG with a wall width of 1.4mm. Try to make your layer levels as thick as you can. This will give water less spots to…
i cant wait to get hermit crabs and i want them to be happy here so i made a climbing wall
original SolidWorks files are available, along with 3mf and stl files. supports needed
An articulated hermit crab with more rock and more eldritch horrors.
A cute little hermit crab that can hold you pens and has a space under the shell! This also has a lovely space for the SD card insert that can hold 3 regular sized and 6 micro SD cards! You can sell however many prints you want with this…
Circular hermit crab feeder with dishes for food and treats. Full scale is 5" in diamter. Can be scaled up or down to accommodate tank size. Printed in pla .4mm nozzle 15% infill.
With the BIQU Hermit Crab installed, there are few options for hotend mounts that explicitly list compatibility. When combined with the Ender 5 Plus, it becomes even harder if I do not want to lose print space. 2022-03-13 - Update:…
Print, screw to baseplate with 2 M3x8ish screws, zip tie USB-C cable to support, profit.
1: This Model is a Remix of the work from WF3D. “ https://www.prusaprinters.org/de/social/3516-wf3d/prints” Model: "https://cults3d.com/en/3d-model/game/apex-legends-thermite-grenade-spicy-sausage" 2:The remix was inspired by the work of…
Hide is about 152 in diameter with a 80 wide opening. Recommend running this in PETG due to the humidity of hermit crab enclosures and turning on supports, I used tree and it turned out fin. Model is around 200g but with supports it…
A mount for the Laser Tree LT40W-AA diode laser to secure it to a Biqu Hermit Crab tool-changer. Two Models are included: A simple mount A Voronoi sketch version to match my personal Ender 3VO Theme The Lt40aa model was sourced from…
The model is about 6 inches wide, and 9 inches tall. I would recommend scaling down the faceplate, eyes, and mustache to about 98% so that it can fit in and be removed from the chassis in order to store items inside. If you do not want to…
A lithopane of the Hermit tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.
I designed this bridge for hermit crab enrichment. I couldn't really find any bridges that didn't use supports, so I designed this one. Let me know any feedback you have!
The Thermite Grenade from Apex Legends! I saw a lot of other thermite files out there, but I never found one that had the thermite expanded out into it's active state. This model was created from scratch using in-game reference photos. It…
Hermit Crab Strain Relief I made a strain relief that holds the wires really solid and in a vertical position to allow maximum height clearance. I used two M2 heat inserts in the top to holes to attach. I feel like you might be able to…
Hermit Crab Stairs paired with a dollar tree bin, Cut out the depth for the stairs insert and allow around an inch for walls
Couldn't find a dish file large enough that i liked for my hermit crabs to fully submerge so I had to make one. The overall size is about 89x157x70 footprint. 63.5x81 basin at the bottom. I highly recommend running it with PETG, PLA…
Larger hermit crab food dish with 7 different sections for a variety of food. Recommend printing with PETG due to the higher humidity that hermit crab enclosures tend to have.
I remixed @Ryan_1788814 wonderful Hermit Crab creation and scaled up a bit. I added some color to it as well in Bambu Studio to incorporate the AMS. Color One is SUNLU PLA+ 2.0 Red Color Two is SUNLU Silk PLA Triple Color…
There are 90° overhangs everywhere so I am not sure how printable this is.
I was able to successfully cut out the cookie dough by chilling it sufficiently, lowering the room temperature, and dusting it with flour.
Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
TAKES A 1/2 IN ROD AND IS SPLIT FOR PRINTING. Category: Props
A drag knife mount for the biqu hermit crab toolchanger. The model is designed to be printed in PLA or PLA+. Use 4 M3x6 screws to mount the holder to the toolplate. Use 2 M3x6 screws to secure the rubberband. BOM: 6 M3x6 screws 6 M3x5x6…
Needed a case and couldn't find one… Simple design, no special features. For assembly four M3x8mm screws are needed (two will be enough). No supports needed.
I wanted to get my gauge off the ground, and figured I might as well make it look aesthetically pleasing while also giving my son's crabs something to climb around on. Uses a round guage with a 41mm diameter rear insert. I got the one…
I couldn't pour the water into the dishwasher because the shelf was in the way. So I designed a funnel with a side offset. Now I can pour the water in much easier, faster and without a mess.
Print in PETG, with supports and brim. DO NOT PRINT IN PLA, I am positive the links will break when you remove them from the plate if you do that.
Forest Hermit with Raven Category: Creatures
A 3D Printed mount for attaching a BIQU HERMIT CRAB tool-changer to an MGN12H linear rail. This mount is designed for an Ender 3 with a Voron Switchwire conversion (Ender-wire) but may also function on a regular Switchwire, although I…
This gantry adapter is specially for use for the biqu hermit crab using a bltouch. It solves the problem I found that you had to use 2 additional pieces to mount the bl touch and it would be far out to the left of the hot end. I found…
This is a mounting plate for a BIQU Hermit Crab with a Top Linear Rail Mount . I use this as part of my Ender 5 Plus to Mercury One.1 Conversion. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No…
A Giant Hermit Crab for your tabletop wargames and RPGs. If you like this free piece please take a second to check out our Tribe (https://www.myminifactory.com/users/nonPareil%20Institute?show=tribe#/) where you can get at least 20 assets…
This is a mount to hold the Biqu Hermit Crab Tool Plates. Can be mounted both horizontally or vertically with multiple mounting holes.
Printed with Fuzzy skin effect.
I recently purchased a BIQU Hermit Crab and wanted to install it on my Ender 5 Plus. Here is a remixed bracket that I put together to allow me to install the Hermit Crab on my top-mounted linear rails. To install the bracket, you need 4 x…
A 3d printed Litho press for printing stone lithographs. Admittedly this press runs up to the limits of plastic, and can only print lithographs on thin papers (i.e. kitakata, newsprint, masa) To print on thicker western papers like…
Edit: STL now includes hole for stepper motor … oops. A simple printed Direct drive conversion designed to fit a BIQU HERMIT CRAB tool-plate to a stock Creality Mk8 Hot-end and Ender 3 extruder assembly. It utilises the standard mounting…
Hello all, I wanted to share on here a go at my rendering of a health counter used for the hermitcraft tcg. The counters encompass the total amount that any of the hermits can start or go down too all the way from 0300 and down to 0000. I…
Design Components: 1. EVA 3 adapter plate for Hermit Crab 2. Pass-thru belt grabbers 3. LGX Lite mounting plate 4. Rat Rig style Pinda mount (modified for this printhead) 6. EVA 3 compatible cooling duct assembly, stretched and clearanced…
From the depths emerges this terrifying Giant Mutant Hermit Crab , a monstrous sea creature sculpted with rich oceanic detail. Featuring a massive crushing claw, jagged legs, coral-encrusted shell, and expressive bulging eyes, this…
This is a stand to work on Biqu Hermit Crab Tool Plates. Its a remix of my original tool plate mount. There is a tray in the front to hold parts. Its designed so that you can stop the print at the correct layer and install magnets in the…
Large dish for staring hermit crab shells to keep them from getting covered in sand. Approx. 220x127x51 Recommend using PETG due to the high humidity typically found in hermit crab tanks.
This is a printable (no support required) toolhead and duct to adapt a Volcano hotend to a BIQU Hermit Crab using a BMG extruder. This is compatible with the following: Volcano Hotend BMG Extruder 5015 blower 40mm fan BLTouch Use the left…
gantry mount for HeroMe7 with BTT Hermit Crab 2 (CAN)
Here is a design for HCTCG deck boxes that correspond with each hermit type. The latch along with the two larger sides have icons from HCTCG that were made by another community member originally and then edited by myself. All files…
As I gridfinitify myself to organize as much as possible. I wanted a better way to house the tool plates for my Biqu Hermitcrab. The already excellent model by zcohen was printed out and in use but I wanted to be able to have it attached…
Mount on M3x6 screws and M3x6 inserts
Had one of the hermit crabs start to dig under my waterdishes and didn't want to collapse the tunnel when changing water. This tray is sized for two of the water dishes and has a bit of a lip around it to help keep sand out but also has a…
This is an adapter plate from the Hermit Crab Tool plate to the Micro Swiss NG REVO and Standard direct drive extruder. This uses the interface with the Hero Me gen 7 bed level sensor. This design requires 12 M3 heat set inserts and one…
Project: the hermit.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 178.38x324.32mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness…
my personal remade of a minimalist hermitcrab mount for the voron SW. My print is in ASA, 0.24 layer heigh,20% cubic infill and 2 walls and supports for the rear “bridge” it should be pretty sturdy,i'm using a older version (without the…
HERMIT CRAB 2 - CAN cable support and strain releif to use a standard PG7 Cable gland with integrated spiral cable protector. Ideally print in ABS or ASA for strength - I printed at 0.12 due to the threads but fairly sure other layer…
Lore: The Hermit Caravan Crab Origins: When the Great Flood drowned the coastal kingdoms, arcane energies seeped into the tide pools, mutating ordinary crustaceans into colossal scavengers. These creatures learned to survive by adopting…
A smaller 7 segment dish designed to hold supplements that hermit crabs need. Recommend printing with PETG due to the higher humidity that hermit crab enclosures tend to have.
Wanted a smaller single section dish to put treats out for the hermit crabs in addition to the multi section food dish. Can be placed in areas the large ones can't for foraging. Tend to put things like berries and things that will go bad…
Wife wanted a sign to stick in the sand that read "No Crabby Attitudes" so i made her one. Made with Flashforge Burnt Titanium PETG for the base and Sunlu Mint Green PETG for the letters. The text was added in Orca (so you should be able…
UPDATE: it fits the Biqu Hermitcrab CAN perfectly! A modification of the X-axis plate to hold a Biqu Hermitcrab CAN on my Sovol SV03. I outsourced the printing to JawsTec at the time, and everything seems to line up well. It should also…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Staking Layers' design is great for covering over the exposed wires of the Hermit Crab V1 system from BIQU. I made the mounting holes a bit bigger for M3
Version2 has been updated. mid plate does not secure itself to any part. It simply gets clamped between the MGN12H block and the Hermit crab. Full range adjustment on the Hermits H2 slot holes. Modelled (but not remixed) with help from…
I printed on a Prusa MK4S with supports enabled
Here is my take of the Hermitcraft TCG item icons created into keychainsin part to share with the community at large as well as to let other strangers know about the Hermitcraft trading card game. Each of these where used with the…
this is specifically designed for hermit crabs nothing else
It can be direclty mounted to the back of the Biqu Hermit Crab 2 mounting blade on the linear rail. Direct drop in replacement, original screw can be used. Height was adjusted so the beld is in the right position. Please ignore the print…
This is the Thermite Grenade from Helldivers 2. Its main feature is that when the bottom part is twisted, the spikes extend and retract. Similar to the Thermite Grenade in Helldivers 2. There is also a Hatsune Miku and blank pin to…
The linear rail adapter that comes with the Hermit Crab 2 has the slots for the timing belt spaced too close together. This makes it necessary to replace the stock belt, which is way too tight. I was too impatient to wait for a new belt…
Replacement X carriage for the Taz 6 to mount the hermit crab modular tool system. Eliminates the weak single-screw with a plastic wedge quick-toolchange system from the Taz 6 in favor of a thinner system that includes wiring and no tools…
i have hermit crabs so i made a hide for them
This is a filled solid export of Xisumavoid's Season 7 Main Tower bouth with and without the Ball ontop.
In my quest to finally stop upgrading the toolhead on my CR-6, I decided to install a Hermit Crab v2, that way if I have a problem I can just pop the toolhead off instead of disassembling everything in the enclosure or pulling the printer…
