Wyniki wyszukiwania: hill

Water Dispenser Adapter for Coleman Chiller 5 Gallon Water Jug

Bottom face down, print with support to get the best result.

Hills for Wargaming

Something I definitely should have done earlier - hills! I created several sizes (in steps of 3", from 6"x6" to 12"x9") with 3 different heights each (1-3"). You can also place them on top of each other, cut them for reassembly, decorate…

Summer Chilling Bird

created via meshy with the prompt (a tui bird wearing a pair of sunglasses, drinking a drink lounging on a deckchair) enjoy

Baseball Key Cover (Blank, Yankees, Phillies, and, Mets)

10-15 minute print, that can easily slide onto almost any key and works on a key chain. Has 4 Different options for different teams, or just blank for overall fun. Enjoy! To make sure the model stays secure during printing, I recommend…

Hexton Hills Tabbed Tile Stackable Tray

Works for Tabbed Terrain Hexes. I don't have much more to say that the original. Be aware that the slots only fit one way, it's a simple thing to flip the bottom due to the genius of the original design. There are four sizes: 12-up -…

Stand for Chilli Technology Action Camera Pro

Printed on Reprap Fisher Delta at 15% infill, no supports. Required drilling out the centre hole to 5mm as it was not quite a perfect fit. An M5 nut should be glued in the end with the hex cutout.

Ice Barrel 400 Chiller Adapter

An adapter to be used on Ice Barrel 400 , so you can chill the water with the lid closed. Connects to a 3/4" barb connector Print upside down with no support

Phillips HUE Button - LK adapter

Adapter for fitting a Phillips HUE button over a LK breaker. Models uploaded for 13x1 mm magnet and 10x2mm magnet.

Token Retainer for Betrayal at House on the Hill (2nd ed) organizer

I really liked the organizer this remix is based on, but I tend to store my board games upright, so the pieces would have all fallen out. Hence, a lid! Took all the pieces into CAD, arranged them just right, and modeled this part to hold…

HueForge - Funny Chinchilla Sign v2

This is a newer model of my original design: https://www.printables.com/model/798718-hueforge-funny-chinchilla-sign This is a funny sign that I made and have placed next to my chinchilla's cage! We refer to her as a potato quite often,…

Chill guy alike model

Chill guy alike model. Isn't perfect but it's good.

Summer Chilling Bird

created via meshy with the prompt (a tui bird wearing a pair of sunglasses, drinking a drink lounging on a deckchair) enjoy

Xelsis milk carafe Chiller/Insulator

A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able…

Chill Chonky Cat

Chill Chonky Cat Meet Chonky Cat , the purrfectly plump companion you didn’t know you needed! With its oversized belly, tiny paws, and huge expressive eyes, this adorable creature is guaranteed to bring a smile to anyone’s face. Whether…

Reinforced split version of Phillips Norelco 3000 holder

Phillips Norelco 3000 holder with reinforcement and split into two interlocking pieces for printing flat

Water Dispenser Adapter for Coleman Chiller 5 Gallon Water Jug

Bottom face down, print with support to get the best result.

Chill Bactrian Camel

Meet the fluffiest traveler in the Sahara… who refuses to travel. This laid-back, two-humped camel just wants to sit, vibe, and judge your hydration habits. The wavy coat prints beautifully, the face has loads of character, and those…

Helmet mount handlebar Mountainbike Uphill

Edit 19.09.25: I installed a new stem, the e*thirteen Plus 35 Stem, with a length of 40 mm. Accordingly, I adjusted the mount to a height of 6 mm. I also reduced the radius of the hook and made it a little longer, so the fidlock closure…

Three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN

This is a three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN

phillips aquatouch mount

simple wall mount for the phillips aquatouch electric shaver. double sided tape works great with this model. no supports required. please, share it if you print it!

Silent Hill Doll - Muñeca de Silent Hill f - Fan Art - Koto Shimizu Hinako - Fox -

Silent Hill F doll 25cm tall to print in one piece. Print settings below. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Muñeca de Silent Hill F a imprimir en una sola pieza.…

Electric toothbrush holder (Phillips SoniCare and happybrush)

Electric toothbrush holder for one Phillips Sonicare and one happybrush toothbrush. You may need to use custom support ("on buildplate only") because the happybrush opening has a quite long bridge. Leave your comments if it works without…

crash derby hill climb chassis

a modified chassis for crash derby cars easy to print no supports fits prusas models

Chilli Sauce holder rack for fridge 30mm bottles

Simple holder for 24 chilli sauce bottles or other 30mm bottles. Printed in PETG with 0.2mm layer height.

Noodle in Melancholy Hill

Enjoy! Originally printed in clear resin to achieve a glass-like finish on Photon Mono 4. Requires supports. This model is part of a project I'm working on, will be updated when complete. Stay tuned! I'm planning on making a scene based…

Hexton Hills Tabbed Tile Stackable Tray

Works for Tabbed Terrain Hexes. I don't have much more to say that the original. Be aware that the slots only fit one way, it's a simple thing to flip the bottom due to the genius of the original design. There are four sizes: 12-up -…

Terence Hill

\"Dicono che sia il braccio destro del diavolo... e non sbaglia mai!\" Completa il duo più leggendario del cinema spaghetti western italiano! Dopo Bambino, non poteva mancare: Terence Hill nei panni dell'indimenticabile Trinità ,…

Chill DJ Gnome

🎧 Chill DJ Gnome – Droppin’ Beats, Not Beards! 🎶 Bring good vibes and laid-back beats to your garden, shelf, or print bed with this groovy little DJ gnome! Some supports are needed. I used organic-style supports, which peeled off cleanly…

Phillips Sonicare Toothbrush Holder

Phillips Sonicare Toothbrush Holder

RockShox Mudguard-MTB/Downhill

RockShox Mudguard-MTB/Downhill, printed in TPU

Wiha 261 Gridfinity bin - Precision Phillips Screwdrivers

A STL if you bought the 4 piece set and just want to print A Fusion file if you want the profiles to build out your custom tray. Vertical unit size of 3 for stack-ability while being as compact as possible. Note that the Pico series…

West Side Hills Academy (WSHA)

A key chain that is the logo of a made- up thingy

Chill Pill

When someone is stressing over anything, just tell them to take a "chill pill" ... Some fun art I orginally made as a gift for a pharmacist friend. Designed in TinkerCAD. Printed in Sunlu Marble PLA+ on my Elegoo Centauri Carbon. 0.4…

Phillips OneBlade holder

This holds the OneBlade very well. In the picture the red block is the razor. I have ran a simulation and it stays still

Kinuta Junko Mask from Silent Hill F - Fan Art - Mascara de Kinuta Junco

Kinuta Junco mask to be printed in one piece. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Mascara de Kinuta Junco a imprimir en una sola…

Chilli Bluey's mom

Chilli Bluey's mom

porta phillips

vaso porta phillips

Phillips Barrel

This 3D model does not include supports; however, they can be added in Bambu Studio. It was printed using PLA filament on a Bambu Lab P1S. The design was created in Tinkercad. I hope you find it useful.

Phillips One Blade Stand

Just a simple holder I made to keep the razor guards neat and tidy in my cabinet. There are a few other pockets for a spare blade, Victorinox tweezers and a cleaning brush.

Držák na zkumavky s chilli

Model lze vytisknout zcela bez podpěr, ale určitě je lepší je mít zapnuté.

Electric toothbrush holder V2 (Phillips SoniCare and/or happybrush) - removable backplate

Another version of "Electric toothbrush holder" from Josef Adamcik, improved to be detachable from the wall. Models available for one Phillips Sonicare and one happybrush toothbrush, or both of each. The detachable backplate "prints in…

Shark from Melancholy Hill Gorillaz Video

Originally printed on the Photon Mono 4. Supports required.

Phillips Beard Trimmer and Toothbrush Holder

A wall mounted tray for a phillips beard trimmer and electric toothbrush. It has a post to wrap the cords around and spots to plug in the cables when they are not plugged into the wall. The trimmer can be plugged in while in the tray with…

phillips one blade holder

At the center stands a raised stone pedestal supporting an intricately crafted miniature throne . The throne merges Gothic woodcarving with castle-like architectural elements: two small turret towers on either side, crimson banners…

Baseball Key Cover (Blank, Yankees, Phillies, and, Mets)

10-15 minute print, that can easily slide onto almost any key and works on a key chain. Has 4 Different options for different teams, or just blank for overall fun. Enjoy! To make sure the model stays secure during printing, I recommend…

Rodillo Afilador Cuchillos

Éste es un rodillo creado por mi para reemplazar uno roto y que sirve para los recambios de piedras de afilar cuchillos que se venden en los portales chinos. Se compone de 4 piezas: 1 émbolo (PLA o PETG ya que no soporta tensiones. 1 eje…

Fire Forged - Phillips one blade

Forged in Fire - Reused flame and LED base concept used in my other designs. Can be printed as large or small variant with a unique shield for each application. The LED base is designed to work with 3mm flashing LEDs. The flash is built…

Phillips Pastamaker Matrize Cat noodles

Lustige Katzennudeln für die Kids oder Katzenliebhaber die eine Pastamaschine von Phillips besitzen.

Phillips One blade barrel holder with "secret" compartments

Design and details: I designed this holder for the Philips Oneblade 360 Qp4631/65 with the goal of having a place for the body comb and skin protector, hidden when the blade is not in use, but at the same time being easily accessible when…

Naloo Hill Bill Leitungshalter

Ersatz für die Leitungshalter am Oberrohr. M5x16 Senkkopfschraube benötigt. Massiv drucken aus ABS

Sriracha Chilli Sauce Bottle Stand / Stojánek na chilli omáčku Sriracha

Poznámka: Český popis naleznete níže. Description A simple stand for a Sriracha chili sauce bottle that allows storing the bottle upside down . This ensures the sauce is always ready to use – even when only a small amount remains in the…

Phillips One Blade KCD 2 edition holder

A wall mounted holder for the phillips oneblade KCD2. usage of a piece of felt or similar soft materials to line the inner walls of the ring might be beneficial cause it may scratch the model otherwise.

Achilles (Akhilleus) - bust

Achille – Buste Français : Ce buste représente Achille (Akhilleus) , l’un des plus célèbres héros de la mythologie grecque et la figure centrale de l’ Iliade attribuée à Homère. Fils du roi Pélée et de la nymphe marine Thétis, Achille est…

Phillips OneBlade & Shaver Stand

A basic but functional stand for OneBlade, I have two large and one small, all three fit in, plus two beard trimmmers.

Philly Love PS5 Controller Stand

PS5 controller stand with the signature LOVE stamped to represent the city of brotherly love.

Phillips Norelco Trimmer Travel Guard

This is a travel guard that snaps over the trimmer's on/off button. The trimmer is really great, except when it turns on in your luggage and causes TSA to get all excited. Actually, that's never happened to me, but I have had it turn on…

Gravitrax Air Time Hill - Tight Fit - Easy Assembly - Fast Print

Chill Rack

The Chill Rack is a 3D-printed modular beverage storage system designed for neat, compact, and customizable organization of bottles or cans in your fridge, cooler box, or shelf. Each rack interlocks securely with others, allowing you to…

Rocky Hill Path Miniature Base

Here is a collection of Rocky Hill Path bases for your RPG minis. There is a base pack where you get the following sizes: 100mm 80mm 60mm 50mm There are also individual files for each size. I hope you enjoy them and find them helpful in…

LEGO COMPATIBLE military lego Churchill Mk IV, WW2 British tank

churchill

Capybara – 27 min – The Master of Chill!

Meet the Capibara: calm, cute, and ready to vibe on your shelf or backpack! With its relaxed pose and friendly face, this little fellow is the ultimate print-and-go animal. A great companion for your desk, collection, or to turn into a…

LightSwitchCovers Phillips Hue and Ikea

3 different covers to install over traditional household mechanical switches. Press in threads on the bottom to install with set-screws. Fits Hue Switches with Magnetic Base Plate No drilling necessary

Furrion Chill Cube Duct for Monaco center duct motor homes

I designed this duct to adapt Furrion Chill Cube roof top AC units in my 2005 Safari Panther ( Monaco made). The design applies to center duct motor homes with a duct width of 8" centered in the AC opening. Each side is approximately 200…

chillin logo

chillin

Soporte de cuchillos para cajón

Introduce un nuevo nivel de organización y practicidad en tu cocina con nuestro soporte de cuchillos para el cajón. Mantén tus cuchillos perfectamente almacenados y al alcance de la mano mientras optimizas el espacio en tu cocina. Nuestro…

Chill Capybara Pen or Toothbrush Holder

This cute Capybara was designed as a calm and charming desk or bathroom companion, combining a relaxed vibe with everyday functionality. With its rounded body, peaceful expression, and gentle sculptural details, this capybara brings a…

GIANT ANTHILLS

GIANT ANTHILLS -5 High Quality models -Supported Version

Donvier Chillfast Ice Cream Maker Handle

Is your Donvier Chillfast Ice Cream Maker handle broken? My in-laws was, so I made this. I unfortunately don’t have a picture of it on the Ice cream maker, but i’m told it works great. It is made from 3 parts and requires a bolt under…

Hillbilly Banjo Gnome

Hillbilly Banjo Gnome Bring a little backwoods charm to your shelf, garden, or desk with this cheerful Hillbilly Banjo Gnome. With his big beard, patched-up outfit, chunky boots, tall hat, and trusty banjo in hand, he looks ready to start…

Achilles

Achilles: The Invincible Champion Captured in a moment of eternal defiance, this figure embodies the greatest warrior of the Trojan War. From the detailed Greek hoplite armor to the iconic crested helmet, every element reflects the…

Achilles

Legendary Hero: Achilles Bring the myth to life with this high-detail Achilles figure. Poised for battle with a dynamic stance, this model is perfect for tabletop gaming, dioramas, or as a standout display piece. Featuring sharp textures…

Chilling SpongeBob Figurine Cartoon 3D Printable

Transform your workspace into an underwater paradise with this incredibly detailed SpongeBob 3D print STL that captures everyone's favorite sponge in perfect relaxation mode! This expertly crafted figurine showcases SpongeBob sitting…

Phillies Ring The Bell earring

Show your Philly pride with these Ring the Bell earrings — a 3D‑printed tribute to the Philadelphia Phillies and their iconic rally cry. Designed for fans who love to celebrate every home run, these earrings capture the spirit of Citizens…

22 and 25mm Wide Head Phillips Norelco Guard

This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for one for awhile so I decided to modify a regular head and I needed to widen some and remove other combs/fins to make it…

Betrayal at House on the Hill Organizer

2nd Edition! For all those pesky fiddley bits in Betrayal... Organize them using this token organizer that fits perfectly in the box! Stores all tokens for Betrayal at House on the Hill board game and Widows Walk expansion. Everything…

ATMOS Chill'n Smiley Face

ATMOS Chill'n Smiley Face printed in 3 colors

Leuchtturm Schillig

Leuchtturm Schillig Nordsee

Chilla Lunatacs Thundercats Villains collection busts fanarts by CG Pyro STL 3d priting collectibles

Download free Chilla Lunatacs Thundercats Villains collection busts fanarts by CG Pyro STL 3d priting collectibles If you are a Thundercats lover you can't miss this collection, join my patreon and get this great character as a reward.…

downhill bike suspention rubber protector

it fits at 35 mm if smaller of bigger you may size it at your slicer.

Modular Outlet Shelf for Phillips SonicCare

Dangly wires and bathroom clutter are a thing of the past with the Modular Outlet Shelf! Instructions Remove the screws from your existing outlet cover, leave the cover in place! Place the 3d printed outlet cover OVER your existing one…

Phillips Norelco 3000 Trimmer Tray

Tray for a Phillips Norelco 3000 trimmer. I was tired of trimmings going everywhere when I set it down so made this handy little tray to contain them. I added some little rubber feet to Elevate the design.

Chillet

Chillet from Palworld with eyes and a mouth sculpted in. Additionally, added raised areas where the blue spots are on one of the models. I would recommend printing it at 100mm tall minimum to preserve detail. Recommended Print Settings:…

Large Chilli

The top green part prints with regular settings. For the body use 0% infill and two walls.

Chilli

Two part, should fit snugly together. I have used a little bit of support for the body.

Hilleberg tent peg hat

Sometimes, the ground is a bit harder, and the pegs are digging right into the hand, or the sole of the boot. Therefore, I made a small “hat” to prevent dammage to hands or boots. It is designed for the smaller Hilleberg Y-pegs (the ones…

Chilla Thundercats Lunatacs free Download STL FILes coupon alla models 50off

I propose you a deal of 50% profit STL 3d printing models Hello my friend, I'm celebrating, because I'm going to start a treatment that I need for a long time, a health issue, and therefore I need a lot of support to collect the money, so…

Hamax Chill footstrap

My child bike seat footstrap broke after 2 years of usage, and I took the chance to put my new skills in OnShape on my service designing the spare part. I designed two versions: original version: like the original one in all it's…

Project C.O.L.D (Chill your drink in less then 2 min!)

Introducing Project C.O.L.D (Convection Optimized Liquid Down-cooling) https://www.printables.com/model/998405-project-cold-a-3d-printable-drink-chiller/comments This is my latest 3D printable creation that can chill any 12oz can of soda…

Mangos para cuchillo

Lo imprimí en ABS para una mayor resistencia y durabilidad. La altura de capa que utilicé fue de 0.2 con alisado para una mejor terminación, lo imprimí en su momento con la creality ender 3 v2.

Captain Churchill Movable

head and torso now are printed separately, so it can turn

AEG AXP26U338CW ChillFlexPro 2-hose conversion

AC shroud to convert the one-hose AEG AC to a two-hose AC for better efficiency. Fits a 125mm intake hose. Also includes the 3D scan of the back.

Clip for phillips vacuum cleaner head

Clip to hold the vacuum cleaner head on a Phillips vacuum cleaner. Printed with PLA, 100% infill, 0.15mm layer height

Hand crank can chiller. Cool a drink in 2 minutes!

Update, check out V2 here : https://www.printables.com/model/1035150-hand-crank-can-chiller-v2-work-in-progress Proudly presenting the hand powered can chiller. Beside this device you need a container with a layer of ice on wich the can…

Posa cuchillos

Soporte para poner cuchillos de cocina dentro de un cajón o para poner sobre la mesada de la cocina. Es muy sencillo y editable.

Hillerstorp feet

Replacement for the feet that can brake with age. I printed mine with PETG but I have tried with PLA as well and that also works. The model is made for and old Hillerstorp model, but I know the model can work with other brands as well.…

Chilly's water bottle tether

A simple tether for Chilly's 500ml water bottles. Print in TPU and stretch over neck of bottle. It should be pretty durable. Prints flat with no supports required. A great test print for TPU.

Chilli seed container

After trying to print an existing box for my chili seeds but not managing to get some good threads, I re-modelled it from scratch. Did some costum threads with overhang max 45° → can be printed without support or other issues. My prints…

lucky chilli charmb (cornicello)

A cornicello is an Italian amulet or talisman worn to protect against the evil eye and bad luck in general, and, historically, to promote fertility and virility. In Neapolitan, it is called curniciello or variants thereof. The amulet is…

Commands and Colors movement trays and Hills

These movement trays and hills are to be used with any of the Command and Colors games by Richard Borg. Fully compatible with: Commands & Colors Ancients Commands & Colors Napoleonics Commands & Colors Medieval Commands & Colors Samurai…

Juwel RIO Aquarium lamp holders for Phillips HUE 7820230p7

Juwel RIO Multilux hub tends to break. The more expensive Helialux comes with extra features but a ridiculous price. I had an unused set of Phillips hue lamps 7820230p7 and turned them into aquarium lightning which can follow…