Liczymy pasujące modele…
Sort like the Sierra RR cars, but even smaller! The 3D long couplers are for ultra sharp curves, you can use regular 1015 couplers if you like. Category: Hobby
Cover snaps over a Kato N scale 11-109 tram chassis to allow for HOn30 or On18 critters to be built.
This is a HOn30 18' boxcar that might or might not look like the Bachperson On30 model. I used Tichy grab irons, stirrups, and brake wheel. 1015 Microtrains couplers and Microtrains axle length (.540") 36" metal wheels form Eastern…
This is a shorty Climax locomotive I made to fit on a Kato 4 wheel chassis. Category: Toys & Games
This is a HOn30 Davenport made to fit a Toma Model Works #6191 power chassis with 7mm wheels and 14mm wheelbase. If you're not up for the challenge of adding he crank rods you can use the "plan B" frame, it has journals like Davenport…
These are the parts I used to make my own freelanced railbus based on the Casey Jones of the Silverton & Northern. https://www.youtube.com/watch?v=1iZ76y9BxHk Category: Hobby
The real locomotive was hand made and still runs. I used video stills to make the drawings. I used a Bachmann N scale 70 tonner with the circuit board removed. A 44 tonner would work as well. Category: Hobby
HOn30 version of a Cincinnati Locomotive built by the Cincinnati Car Corp. This 3d model was made from photos and not scale drawings. To me it is a little bit big for HO scale. You can resize.
This is a HOn30 version of the 3' gauge Hoosac Tunnel and Wilmington railroad. I use Microtrains 1015 couplers and MDC N scale passenger trucks with 36" metal wheels. Category: Hobby
This is a HOn30 5 ton BFA Brookville gas locomotive. It is designed to use a Toma Model Works power chassis #6151 with a 12mm wheelbase and 6mm wheels. This is the chassis used:…
This is a HOn30 Mattole Lumber Co. Vulcan Iron Works 0-4-2. Made to fit a Aru Models 0-4-0 chassis with rear wheel added. Print body tipped up at 23 degrees and after printing remove rear tab. Category: Hobby
HOn30 Ewa Plantation boxcar. Uses Micro Trains length axles. .015" wire for the truss rods. .0125" wire for the grab irons. Use either 1015 couplers or link-pin couplers. Category: Hobby
This is a HOn30 Climax I made using parts from a Life-Like SW600. Just offering it up in case any parts of it can be used. Category: Hobby
This is a HOn30 motor car for the Eureka-Nevada Railway. It used a newer Kato 11-109 or 11-110 power chassis with the plastic shell stripped off. Updated with more detail. Category: Hobby
This is made to take 36" N scale wheels with .540" axles. (Microtrains length) I used HO scale 2x6's for the decking and Microtrains 1015 couplers. The first Rio Grande flat cars were 90 small 4-wheel cars with a capacity of 5 tons, built…
The Kennebec Central has 8 coal cars. 3 of them were made from flatcars. 5 of them were longer. These are old files. I use two 1/16" dia tungsten welding rods under the cars to keep them straight. Category: Hobby
HOn30 Dolly Varden Hopper. Plus bonus shorty.
This is a HOn30 Bellevue and Cascade stockcar. Frame uses Microtrains 1015 couplers. Trucks use any Microtrains axle length (.540") 36" wheels. Category: Hobby
NEW lime rock dump car in HOn30. I updated the journals and springs. Also added brake beams and more bolt detail. Included is a supported model. I used 1015 couplers and 36" N scale Eastern Seaboard Models metal wheels. But any…
These are tippers used by the Lime Rock Railroad made in HOn30. They use MicroTrains length axle wheels and a .020" piece of wire between the journals. Category: Hobby
HOn30 Jackson and Sharp type trucks. Use 36" .540" axle wheels. Category: Hobby
These cars were used on the Iron Mountain RR in Pardee MT. Modeled in HOn30. Any MicroTrains length (.540") axle wheels will work. 36" wheels in N scale are the correct size, but 33" will fit. Category: Toys & Games
Parts for an EBT M3 railcar. I used wheels from a Kato C12, but you could use Kato 11-607, 11-608, or 11-609 wheels. Category: Hobby
I use 1016 couplers and 2 1/16" tungsten welding rods glued to the underside. Category: Hobby
I disliked the tie spacing of the Peco Hon30 "rough" SL-400 track so I made some tie strips to use as a filler. When you decrease the tie spacing then you need to fill the gap with more ties. That's what this 3d file is for.
HOn30 Maine truck. Uses .540" axle wheels. I use Eastern Seaboard Models 9209 N scale 36" metal wheels. Category: Hobby
These trucks use 36" Eastern Seaboard Models 9202 metal wheels for .540" MTL length axles. But any .540" wide wheel should work. This is an old file. Category: Hobby
New Rockland Slate in Canada had a small 30" gauge railroad. 0.540" wide axles and 1015 couplers. Couplers snap in.
Someone asked for me to upload these. I was able to use code 55 rail in them. Category: Hobby
Here is my version of the ALCO Boxcab designed for HOn30. This was designed loosely based on several prototype photos and uses a readily available chassis. This model was designed to be printed on an FDM printer with a standard 0.4 mm…
Here is a simple (and hopefully somewhat beginner friendly) Hon30 Class A Vertical Boiler Climax. This was designed loosely based on several prototype photos with inspiration drawn from the NWSL and Mark Rollins kits that were offered a…
These are for a Fyling Zoo HOn30 18 ton Climax. Category: Hobby
Here are a few freelanced 4-wheeled cars to round out your rolling stock. These models utilize my wood side dump car chassis and were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height. These…
Designed to use a Tomytec TM TR02 chassis or something similar. Category: Hobby
Here is another simple and beginner friendly HOn30 Freelance Climax, this time though it’s a Class B. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available…
Here is my take on the ubiquitous H.K. Porter 0-4-0. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and all parts are designed to be printed with no support. Also, this model is designed for use on…
Just pop off the bottom plate and put this on. Category: Hobby
Here is a simple model of a narrow gauge skeleton log car. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and 1015 couplers. Tips for…
Here is my take on Overton style passenger cars. These models were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and/or 1015 couplers. There are now…
Using N scale TTrak standards you can NOW make an Hon30 module with these 3d printed track connectors. They use Kato unijoiners and the Hon30 track tie strips (I've created available here ) and you supply the code 55 rail to have an Hon30…
Here is my version of the universal small narrow-gauge diesel often known as a “critter”. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and all parts are designed to be…
Here is another HOn30 geared steam locomotive, this time though it’s a Shay! This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available Kato 11-105, 11-106, or…
HOn30 railbus designed to use a Tomytec TM TR02 chassis or similar. Few different versions. Category: Hobby
Here is an adapter to retrofit a Tomytec TM-TR02 chassis into a vintage Minitrains Plymouth. The vast majority of original Minitrains suffer from split gears. To fix this I decided to re-power mine with a more modern and easily sourced…
Here is another simple and beginner friendly HOn30 Freelance Climax, this time though it’s a Class B. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available…
Here is another HOn30 geared steam locomotive, this time though it’s a Shay! This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available Kato 11-105, 11-106, or…
Here is my take on Overton style passenger cars. These models were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and/or 1015 couplers. There are now…
HOn30 Gilpin ore cars, 2 flavors. The trucks have a flat side to the bolster, that goes towards the coupler. Couplers are MTL 1015. I use Eastern Seaboard Models 36" N scale metal wheels in the trucks, but any MTL length axle will work.
12 & 6 inch shelves for displaying HOn30 & OO9 model trains. Multiple shelves can be aligned to each other using 1/8 X 2 inch pins (stainless steel is recommended). Can be attached to the wall with drywall screws or stacked on top of each…
Very old file. HOn30 hopper frames to narrow Tichy hoppers down to HOn30: https://photos.app.goo.gl/1hoMNR56THrudEvP6
Here is my take on the Wood Side Dump Car. This was designed loosely based on several prototype photos and a sales brochure. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height…
Fresh off the Mad Doctor's operating table is my version of ubiquitous steeple Cab designed for HOn30. I've made steam and diesel engines, so why not an electric loco? This model was designed to be printed on an FDM printer with a…
To coincide with the release of my Baby Shay here is my take on the Gilpin Ore Cars. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins,…
Quincy & Torch Lake early rockcar that was narrowed and shortened. I used the trucks from my boxcar here: https://www.thingiverse.com/thing:5131200 Couplers are Microtrains 1015. Category: Hobby
Same railbus I have up on Shapeways. Will take either a Kato 4 wheel chassis or the Kato 8 wheel chassis. Category: Models
Jackson and Sharp type trucks for HOn30 passenger equipment. They use 36" Eastern Seaboard Models 9202 metal wheels for .540" MTL length axles. But any .540" wide wheel should work. Category: Hobby
HOn30 Baldwin tender. The floor is designed for Kato Caboose trucks. You can put their contact strips into these new trucks. Also made to fit a MDC/Athearn 2-6-0/2-8-0 motor in the tender or a coreless motor using the mount. Category: Hobby
HOn30 SRRL style railbus sideframes that fit a Bachmann 44 or 70 tonner truck. Category: Hobby
Narrow a D&SP waycar for HOn30 and made a short version. I used .015" wire along the bottom of the frame. And I used Kato diesel wheels. Category: Hobby
The whistle is cored to put .010-.015" piano wire into it. Keeps it from breaking off. DON'T FORGET TO SUPPORT THE TINY PIN INSIDE THE BELL FRAME! Category: Hobby
To match my boxcar. Use trucks and underframe from the boxcar. Category: Hobby
HOn30 Grove Farm plantation 0-6-0T. I used an Aru Model ARU-A4010 chassis on mine. Category: Hobby
Just a HOn30 cab file I had laying around. For the kitbashers and scratchbuilders. Category: Hobby
This is a HOn30 slightly shortened Kennebec Central Forney #1 made to fit a Toma Model Works Kiso loco chassis. The real locomotive was converted to burn coal with an extended smokebox. To print tip the body up at 23 degrees. After…
A HOn30 bridge based on the Buchanon bridge along the Waynesburg & Washington
Update: 12/22/25: I have updated the files to be easier to design in and with. The gauge is better on tight curves now as well. HOn30 tie strips with uniform ties and wood grain texture. To be used with code 55 rail. When laying the rail…
Wooden box girder bridge with “X” cross beams. Made to be printed in place and supported from underneath. For best results print in resin. The details are too fine for FDM.
A shorter version of this wooden box girder bridge - based on this prototype Chris found .
HOn30 logcar. Uses 1015 couplers or print the one with dummy couplers. For trucks use the ones in my 18' Boxcar model. Wheels are Eastern Seaboard Models 36" metal wheels with .540" axles. But any Micro Trains length (.540") axles should…
HOn30 ore car with no couplers. Use Micro Trains 1015 couplers
HOn30 Steam Dummy *based* on Baldwin #12807 Std 5½&8x13 33” 0-4-0 Coke 7/1892 4 5/10-C North Chicago Street Ry #12 Motor Returned as “too small” ~ Resold Mohnsville & Adamstown #1 Print roof upside down and sand it smooth. "block" file…
HOn30 Gilpin ore cars, 2 flavors. The trucks have a flat side to the bolster, that goes towards the coupler. Couplers are MTL 1015. I use Eastern Seaboard Models 36" N scale metal wheels in the trucks, but any MTL length axle will work.
Eureka Mill Ore Car HOn30. 1015 couplers and MTL length axles. I used 36" N scale metal wheels from Eastern Seaboard Models. If you can support this model better, then please upload it.
