Liczymy pasujące modele…
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
Designed for generic 5.8L ricebox with bottom size 195x97mm. Combined dessicant container and spool holder, and fully printable with no need for any other hardware. Just print and use. Despite the shrinkage of the material, it is better…
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
Storage for damage counters, coins and markers, the size allows it to be stored inside any 100-card deckbox. For assembly, a minimum of x8 4mm * 3mm magnets are needed, 4 for the lid and 4 for the base, for better grip place all x12…
Hi all, in my lab rutine I use my eppendorfs all the time and ofc it has to be kept on ice. Problem arise as the ice starts melting all the eppendorfs starts floating around. Pretty anoying. So to keep it in place and still on ice I made…
A remix from the Pokeball Planter by Lapwing_3D_Prints ( https://www.thingiverse.com/thing:513 ) to with a screw on lid common to diceboxes. Throw the lid into Tinkercad and place some of Pokémon sculptures by either Printed Obsession (…
Here is the JuiceBox 2.0, it now has a USB C & A buck converter in it. It is still 1 PowerPole input and 2 PowerPole output. Here is the link to the buck converter used: https://www.amazon.com/dp/B09D98799T I printed mine in Orange ASA to…
My hands where practically dripping with free time this summer so I made a customizable Dice Box. This model lets you turn on or off the pen slot, figure slot and eraser slot. You can also choose how many of the slots you want and what…
Dicebox to hold your Vampire the Masquerade, Hunter the Reckoning, or Werewolf the Apocalypse dice. If the dice are at most 23mm from tip to tip, they should fit. Printing this shouldn't require support, as even the bridging near the…
This is a container, and cover, to store one stash of 15 Looney Labs Icehouse pyramids. Pictured with 3d printed pyramids, but fits normal injection-molded ones just as well. You need one “icebox” and one “icebox-lid” per stash (assuming…
Ich habe 3x40 mm Stifte genommen zum Sichern, einfach nach dem Hereinstecken leicht herunterziehen und es hält. Zum Herausnehmen und tauschen einfach rauf drücken, Stifte raus und wieder einhängen, und sichern. Gedruckt mit Carbon PLA…
A perfect expandable dice vault for the dice goblins who still want to keep their dice neatly organized. The center holes together with the ramp in the bottom part make up a dice tower for rolling. The bottom is also taller than the other…
Super simple hinge I made to replace the broken one on my Cruzin Cooler scooter, same hinge as most Coleman and other coolers also. Print from TPU or other very flexible material.
Holds a juice box ~40x48mm, common size in Sweden (probably not just here). Good snug fit. Holds it in really well, even upside down. Edit: v2 - Small changes to handles and outer corners.
Full description and build instructions available on https://github.com/Devnol/Juicebox
Keep your tokens organized during travel and while playing Star Wars Unlimited. Tokens are from metalFABtokens.com. Trays are designed to fit the RNG Dicebox from Heavy Play. Bottom tray can hold two sentinel tokens and either the round…
Threaded. Printed with Prusament PLA Army green. Layer height 0.2 mm. No supports needed. Autodesk Inventor .ipt model included.
Keep your tokens organized during travel and while playing Star Wars Unlimited. Tokens are from metalFABtokens.com. Trays are designed to fit the RNG Dicebox MAX from Heavy Play. This tray is slightly larger than the non-'Max' box. Bottom…
A Hexagon dice box. Fits a standard set of die. used these magnets: https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXY6WBR/
Open the carton, hand it to the child, and in their excitement they squeeze it everywhere! This was designed to solve this exact problem, and neatly makes a portable unit with space for an attached metal straw - much longer lasting than…
This model is entirely my own design, but obviously heavily inspired by the original from Thump2010. The model is just a plain, unlabeled box. I added my callsign in the slicer. Main difference is the use of a different buck/boost…
Uses 4 small Magnets (12mm Diameter) to hold the Lid. I printed it in PETG but you can use PLA or maybe most other plastics too. Orientation: The main part can be printed as-is. Please rotate the lid to lie with the flat side on the bed.
Wider version of https://www.printables.com/model/891659-juicebox-holder Changelog: 2024-08-07 - Redesigned handles
I'd be surprised if anyone downloads this one :D Takes 8x3mm magnets.
A keychain to hold your two favourite dice, so you can always play the games you enjoy wherever you are. Uses vasemode. If using PLA, the cord between the top and bottom might break. If so, cut it off, it's just to keep the both parts…
This box has been design to hold a full set of dice plus an extra D20 for when the first betrays you! designed for 5mm diameter neodenium magnets in both lid and box. Will be printing this over the next few days and will add any tips…
Printing Instructions: Material: PLA Infill: 100% Layer Height: 0.2mm Supports: No Rafts: No Brim: No Color change at 1 mm or 6 layers. Slovak version. Happy printing!
Spice box to hold your spices. I have added two versions. In First version, the box itself is divided into sections. In second version, you have the compartments separately as shown in render. A lip is also included that can be used to…
Printing Instructions: Material: PLA Infill: 100% Layer Height: 0.2mm Supports: No Rafts: No Brim: No Color change at 1 mm or 6 layers. English version. Happy printing!
Made a holder to hold my Juicebox charger with the Tesla charge adaptor connected to it so I can hang it from the wall without removing the Tesla adaptor. Recommended 0.2mm layer, 6 walls, 25% infill, PETG
Unleash the power of dragons with this Dragonhead Dice Box, perfect for Dungeons & Dragons, Pathfinder, or really any TTRPG! Designed by FletchForm Studios, this dicebox is in the shape of a dragon head! Dragonhead Design: A detailed…
The are some terminal covers for the 12V in side of the Lone Peak Juicebox camper electrical system. Print with TPU and they should be flexible enough to friction fit on the terminals.
Juice box holder / Saftkisten Ständer a stable and sturdy holder to keep the juicebox high enough to properly fit a glas below without placing it at the counter top's edge. Juice box ist placed slightly tilted to ensure proper flow.…
Build a whimsical audio recording device that features built-in effects. You can record an audio sample (20-second max) and play it back as a loop. During playback, you can change the pitch of the recording using a slider, and apply two…
I had an old icebox. It was in good condition, but I lost the drain cap. And the cap that connects to the air bubbler I was using for fishing was broken. I made new caps to replace them. My icebox is the same brand as this one and I think…
Trichter zur schnellen und einfachen Nachfüllung von Emsa Spicebox Gewürzdosen. 0,2mm PLA Brim
This is a thicc juicebox you could print.
Needed small boxes to spice cabin so made some. 9,5 cm deep to fit in our spice cabin. Three width: little over 6cm for soup cubes, 95 mm for thinner bags and 110 mm for wider.
A friend who plays Pathfinder wanted a version that wasn't so D&D related, but didn't have a logo on mind. We went with a simple D20 design. How I Designed This Removed the logo in Onshape and exported as a STEP file. Imported the file…
This is the physical housing for the IceboxHero , a self-contained, fault-tolerant freezer temperature monitoring system built on a Raspberry Pi Zero 2 W. Project Repository & Code: https://github.com/crakerjac/IceboxHero Hardware Fitment…
!!!WIP!!! After some field testing, some reinforcement is needed. Keep an eye out for the next version after V3. Recommend 8 perimeters, and at least 5 top and bottom layers to make sure it is strong enough. V3 includes a T20 bit on the…
This is JuiceBox , a robot from the game Crashlands that help Flux with advices, crafting recipes and also as a sidekick cargo pallet. I model this character to 3D print as multiparts, so you can make it at your time and also test some…
JuiceBox Ständer mit Abtropfschale – modular & magnetisch Entstanden für die PRINTED Hub 2026 Dieser Ständer ist ursprünglich für die PRINTED Hub 2026 in Rüdesheim am Rhein entstanden. Dort hat er sich im Einsatz bewährt, und jetzt gibt's…
🇬🇧 English version below 🇩🇪 Deutsch Schluss mit klebrigen Sirupflecken auf der Arbeitsplatte! 🍓💧 Diese Tropfschale kommt einfach unter den Spenderkarton Deiner Juicebox, dem Sirupspender, mit dem Du Dein Wasser mit Geschmack aufpeppst.…
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
!!!WIP!!! After some field testing, some reinforcement is needed. Keep an eye out for the next version after V3. Recommend 8 perimeters, and at least 5 top and bottom layers to make sure it is strong enough. V3 includes a T20 bit on the…
This is the physical housing for the IceboxHero , a self-contained, fault-tolerant freezer temperature monitoring system built on a Raspberry Pi Zero 2 W. Project Repository & Code: https://github.com/crakerjac/IceboxHero Hardware Fitment…
This model is entirely my own design, but obviously heavily inspired by the original from Thump2010. The model is just a plain, unlabeled box. I added my callsign in the slicer. Main difference is the use of a different buck/boost…
A buddy of mine bought some USB buck converter boards and was going to make an adapter cable and I had the idea of this box instead. It has one set of power poles in and 2 sets out, and then USB to power a PI, what have you. This box is…
After failing on repairing the handle old school ways (glue in a metal part), which didn't last very long, I started designing a 3d print (actually one of the first things I printed). This lasted a couple of years till it broke again. In…
