Wyniki wyszukiwania: inue

plate NOTICE - The beatings will continue untill morale improves

Spill guard for Dacor Gas Cooktop- Discontinued part, exact replacement

I got asked if I had a model for the spill guards for a Dacor Gas range. Since I had previously published the file for the Dacor Gas range knob set, I decided to make a model so you can print your own spill guards. Dacor no longer makes…

Nozzle Cam Prusa I3Mk3S+ from cheap Earmicroscope -DISCONTINUED (made a new better model)

Update 29.05.2023 . I do not use this design anymore because I made a superior model shortly ago. I recommend not using this model any longer and suggest you use my best nozzle cam (and still the most affordable solution) . Problems with…

DISCONTINUED - Cura for Bambu X1 and P1 Series

It seems as if this does not work flawlessly for everyone anymore. At the moment, I do not own a Bambu Lab Printer - therefore this project is no longer continued/updated and has not been updated for quite some time. For safety measures,…

Press Any Key to continue...

Long missed Anykey is here! I printed mine with 0.4mm nozzle, but smaller diameter is adviseable. With superdetail 0.08mm layerheight it turned fine anyway, tried PLA and PETG and both worked fine. Works with HP Pavilion Gaming 500 HSA -…

TO BE CONTINUED... Bookmark

Perfect bookmark for the books that lie on your nightstand... It makes nice shadows and reminds you every time that it's time to continue reading that amazing book you've been reading for half a year... The two parts should hold firmly,…

KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984. For model: K 2.03 / T-50

This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.

Discontinued Playmobil castle battlements

Playmobil discontinued castle battlements based on Playmobil 3666 compatible with original Playmobil parts. Raft can help for castle battlements connector Support is not necessary but i have used it for my samples.

To Be Continued arrow (Jojo)

Jojo's "To Be Continued" Arrow redesigned as the one available I had issues slicing. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Resolution: 0.2 Infill: 35% Filament: 3DOn ABS Atlantis Blue Notes: May need a brim…

!discontinued! Airsoft reflex sight prototype.

This model does not work and is currently not in development. I made this some time ago, because i wanted make my own cheap red dot sight. https://www.tinkercad.com/things/jTnmEr25lEZ-airsoft-reflex-sighteotech-512-prot TLDR: bad idea If…

Bookmark TO BE CONTINUED

the bookmark is 0.6 mm thick, so 0.2 mm layer height is prefered

Long arm Hanging Universal spool re-winder (Discontinued)

This is an old design I no longer recommend. Instead I suggest this design . Why is it discontinued? Here are the main problems with rewinders of any kind: Very difficult to tune to keep working A new spool is heavier and requires more…

Bookmark Lesezeichen to be continued...

Simply clip it on your page and mark your last read page.

To Be Continued book mark

The perfect book mark

*DISCONTINUED* VORON Euclid Probe Gantry Mount

I no longer use this, now running TAP . ---------------------------------------------------------------------------------------------------------------- My own Voron gantry mount for the Euclid Probe . - Docking is near min X and max Y…

Continue using the original motor! (E3NG)

If you wish to upgrade your AB motor, you might encounter the same situation as I did. The original motor of the Ender 3 cannot be properly mounted on the Z-axis motor bracket. Therefore, I designed this new motor bracket to allow the…

ONE PIECE - "To Be Continued" Fridge Magnet

“To Be Continued” Magnet - One Piece This 3D-printed magnet features the famous “To Be Continued” text from One Piece, perfect for fans looking to add a subtle touch of their favorite anime to everyday life. The model is designed to fit…

Hanging Spool & Buffer Shelf (Discontinued)

New Version found here . This is a full Filament Management System. It is a hanging shelf that holds several Spools of filament. Under each spool is a filament buffer so the system can be used with an MMU2(s). This was designed to be used…

FMController (DISCONTINUED)

THIS DESIGN IS DISCONTINUED AND HASN'T BEEN TESTED. IT PROBABLY ISN'T FUNCTIONAL SO I WOULDN'T ADVICE BUILDING IT. INTRODUCTION The FMC (Flat Mobile Controller) attaches to your phone case and slides under the phone when needed, allowing…

Spool Cuff for MMU2. Buffer Replacement (Discontinued)

Discontinued. This didn’t work well. This is an experimental idea. It may or may not actually work. I welcome testers and feedback and that is why I have posted this thing so early. If you want to test a Custom size spool cuff let me know…

The beatings will continue until morale improves plaque

designed for single extruder: your slicer should autodetect and apply color change automatically

VASE SINUEUX

J'ai conçu ce vase avec de profondes rainures qui mettent en valeur sont aspect sinueux. La photo de présentation est une image de synthèse, mais l'impression a été simulée au slicer pour garantir un résultat satisfaisant. Mes nombreuses…

Beatings will continue sign

Modular Honeycomb Desk Organizer - REMIX, Continued

I really appreciate Googliola's approach to printing these desk organizers. I realized that I needed a few larger pots, and decided to just scale it up to 7 pots. These work great with existing Modular Honeycomb Desk Organizer prints and…

PTZ 2804 Motor Mount - discontinued motors :(

Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source Standard Content Library for our 3-D printable designs, so you can focus more on your…

Press "Any" key to continue!

Press "Any" key to continue! This keycap is compatible with Cherry Mx key switches. I printed mine at a 1.2mm layer height without any print supports. If you'd like to do some colour changes at different layer heights; you can start the…

BDUAV 2204 Motor Mount - discontinued motors :(

Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source Standard Content Library for our 3-D printable designs, so you can focus more on your…

To Be Continued

Based on the popular meme template, this is a perfect bookmark for that one read that just needs to be continued later. The arrow hooks on to the spine of the book.

Turbo-Bowl: Turbo-Vase+, the Sequel Continues

here's some matching bowls for Vase10A. (Turbo-Vase+, the Sequel). Scaled 1X and 2X Category: Sculptures

Project - Scout (PTZ) - discontinued motors :(

Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source Standard Content Library for our 3-D printable designs, so you can focus more on your…

Festool 449666 fence clamp component (discontinued, for MFT 1080 / 800)

This is a component (part 31 or 25 on the explosion chart) of the fence holder for the original MFT 800 /1080. All the other components are available to order as of 07/2021. You can gain a few centimetres of cross cut capacity by using…

Minuet of Forest Plinth

Recommend small layers to really get the detail, it would look really cool in a stone filament. HIGHLY recommended to size up a bit unless you detail setting are dialed in. :)

Simple, 1 gram, 8 minuet tweezers

Do you ever just need a pair of tweezers, but you just can't find those pesky little things? Well, you're in luck because this pair of simple useful tweezers can be printed in under 10 minutes! weather it's for grabbing those painful…

Project - Scout (BDUAV) - discontinued motors :(

Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source Standard Content Library for our 3-D printable designs, so you can focus more on your…

Wyze Cam v3 / Elfa Top Track (discontinued) mount

Nice stable mount for a Wyze Cam v3 to the now-discontinued version of the Elfa Top Track (e.g., here ). Note that this model does not have the snap-fit features to make it click into place on the Top Track, it just stays in under gravity…

Nesting Boxes v0.1 (Discontinued)

Nesting Boxes with their sizes in the file name. These are very basic, still being worked on.

AirBuffer for EMMS (External MMU Mount System) PRUSA Enclosure - DISCONTINUED

Update: I made a better autoretracting system. This Airbuffer was not reliable enough. Please consider these files as obsolete/discontinued. But if you find this useful in any way or other projects you may use them anyway. That’s why…

Antec Minuet 350 (MT-352 PSU) Flex PSU Adapter Bracket

Bracket allowing you to mount a flex atx PSU in an Antec Minuet 350 case that comes with a proprietary PSU (MT-352)

Project - Ansel V2 (PTZ) - discontinued motors :(

Welcome to MotorGo. Our mission is to make advanced robotics simple and accessible to the world. As part of that mission, we are building an open source Standard Content Library for our 3-D printable designs, so you can focus more on your…

Andersen Window Louver Bracket Replacement – Discontinued Part (3D Printed Repair)

Do you have an older Andersen louvered window with broken or missing brackets? These parts are no longer available from Andersen, but now you can print your own durable replacement. This model was reverse-engineered from an original…

Modular light display for aquariums -= DISCONTINUED =-

-= 03/12/2025 =- -= DESCONTINUADO =- Pantalla de luz modular para acuarios, desde 20cm hasta el infinito. Imprimir en PET-G, ABS, ASA, PC o cualquier filamento que soporte temperatura. Tornillería M3x5 M3x7 M3x10 e insertos M3x5 Se…

Hooks for IKEA Bästis Bone (discontinued item)

Extra / Replacement Hooks for the discontinued Hook Rail Bone from the old IKEA Bästis collection (2007 I think). Did a 10% infill on a test print, it hold when placing it on bone without snapping, but maybe 20% or more should be better…

The useless objects series continues

Useless

Box divider for IKEA Variera (discontinued)

A box divider for the discontinued IKEA Variera.

Starmaus- Discontinued project

Starmaus was supposed to be a show that focuses on two rival lab companies with two different raptors, attempting to make the 'perfect' defense raptor. Inspiration from the sentinels from Murder Drones (credit to Glitch Studios for that…

The Marshmallow Guardian: The Journey Continues

The Marshmallow Guardian: The Journey Continues Fluffernut is back: a round little marshmallow with two dot eyes and a tiny open mouth. It sits on a desk, a shelf or next to the bed. The model One piece, about 74 x 70 x 75 mm. Print it in…

X4(original discontinued version) TPU Case

This is for the original X4(not available on xteink’s site anymore): Add a pause for the insert of the magnet(0.1inch thick) Add a pause for the insert of the 3D printed X4 support device to support the bezel overhang Print support device…

ONE PIECE - "To Be Continued" Fridge Magnet

“To Be Continued” Magnet - One Piece This 3D-printed magnet features the famous “To Be Continued” text from One Piece, perfect for fans looking to add a subtle touch of their favorite anime to everyday life. The model is designed to fit…

Spill guard for Dacor Gas Cooktop- Discontinued part, exact replacement

I got asked if I had a model for the spill guards for a Dacor Gas range. Since I had previously published the file for the Dacor Gas range knob set, I decided to make a model so you can print your own spill guards. Dacor no longer makes…

Masta Blasta Case (Discontinued. CHECK DESCRIPTION)

What happened, why discontinued? Reason for that would be probably my self-conscious about KYC (Know Your Customer), so that case I just moved on to the PayHip where I sell other materials. If you want to buy this file, Click Here