Liczymy pasujące modele…
If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place. UPDATED for both new 2024 and old 2020 magsafe charger versions. Idea Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy…
iPhone 16, iPhone 16 Plus, iPhone 16 Pro and iPhone 16 Pro Max cases Print it in TPU for maximum convenience. If printed without top and bottom layer, it will be easier to peel from the print bed. Check my other models for even better…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Modular Desk Organizer System – Standard Set This Desk organizer design includes four interchangeable components sized to fit together naturally. The set consists of a Classic Phone Stand , Pen Holder Module , Storage Cup Module and a…
Inspired by the energy of waves and the elegance of natural rhythm, this sculptural phone stand merges functional balance with fluid aesthetics . Part of the Meyui Onami series , this piece explores how motion and stillness can coexist in…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
iPhone 17, iPhone 17e, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max cases Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. Two variants available - thin with camera border and regular (thick) -…
The charging cable can be used while in the stand. I use an Apple leather case and that fits good. Printed on the side. No supports needed!
My dbrand grip case broke and I don't really want to get another one because they are expensive. I made this model based off of the dbrand grip with a couple of my own touches. You can expose the infill on the bottom to create a unique…
Description Simple form, easy to print, no supports Disclaimer: This charger is designed to fit only the original Apple chargers *2025-02-10 Big Update. Currently Apple released 2025 a new charger (Ø 55,5mm and a height of 4,37mm). The…
A simple stand for iPhone 11, 12, 13, 14, 15 and 16. I use an Apple leather case and that fits good. Cutout in the front to still be able to swipe up. I added a second version for those who use an apple wallet on thier phones Printing…
Print at 0.16mm Supports: yes
These models are from the (new) iPhone 14 Pro. The .obj file is for renders. (Usdz file is available but i couldn’t upload it here.) The .3mf file and stl are for 3D printing. If you just want your dummy in one single color, then you can…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
I use an Apple leather case and that fits good. If you look for a stand where the charging cable can be used: https://www.printables.com/model/401057-iphone-stand EDIT : I added a second version for those who use an apple wallet on thier…
Case for the iPhone 13. It has grips on the side to help prevent drops. Fits the regular iPhone 13 only. Designed for PLA/non-flexibles.
This is a relatively easy to print phone case for the iPhone 15 Pro Max so you can protect your shiny, new, titanium phone. The case consists of two pieces: the case and the camera guard. Print the case in TPU or other flexible filament,…
I took the iPhone 13 CAD models from Front Page Tech and 3D printed them! I converted the STEP files to STLs then printed them out on the Prusa Mini in Red Prusament. The original STEP files along with my exported STLs are included. My…
This model was drawn in Fusion 360 based on the actual iPhone 17 Pro Max technical drawing. The model measures 163.43 mm in height and 77.98 mm in width. The model includes the power button, volume buttons, action button, microphone and…
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
UPDATE 1 Added Case model with Honeycomb pattern on the frame ______________________________________________________________________ This Case consists of the main cover and a mini bumper for the cameras that fits between the iPhone 13…
IPhone 15 pro case. should be printed in tpu.
Simple case for iPhone 13 Pro Prints easily with PETG or PLA
I designed this case for my iPhone 14 Pro Max when I first got it and was waiting to buy a regular case. I printed this in Ninjaflex TPU (85A shore hardness) which works well. Something in the low 90A scale would be better in my opinion…
Printed in TPU with a 0.6mm nozzle. You may need to slide a knife along the top of the buttons to free them from the case. Use your slicer to create the pattern on the back using infill only with no top or bottom layers for the bottom. I…
iPhone Halter für iPhone 12/13/14/15/16/17 Pro in Verbindung mit dem MagSafe Ladekabel. Durchgangsloch zum Herausdrücken des MagSafe. Bei bedarf mit einem doppelseitigen Klebeband auf dem Tisch fixieren. iPhone stand for iPhone…
I don't know if this counts as a remix, but I believe in giving credit when it's due. I printed and used Leo DIY's case. The print came out great and the case fit well, but I had a hard time pushing the lock and volume buttons. I used his…
Remix of https://www.thingiverse.com/thing:4946346 to make it compatible with the IPhone 11 Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 100% Filament: 3DJake TPU Orange Category: 3D Printing
Feel free to like and share your make!
I mean I was gonna make just one entry for new iPhone lineup but Apple chosen to 🦆 the naming scheme. here you go brand new iPhones 17, 17 Pro and 17 Pro Max If you’re looking for rest of iPhone 17 models (I mean Air) check link bellow ⤵…
D: Schutzhülle für das Apple iPhone 7 und iPhone 8 Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as a hard case…
Credit for this design goes to https://www.thingiverse.com/jburd/designs I simply added the cable tracks on the back. I also added an addition file with and extension to support a phone if it isn't magnetic (tested with iPhone 11 and it…
cover for iPhone 14, material TPE/TPU, layer height 0,2mm, no full top or bottom layer, honeycomb filling
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? I printed flat @ 0,1 layer height
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
TPU 95A Buse : 0.4 mm Wall : 0.4 or 0.8 mm Infill : 5% 2 versions : 1 thick (3.5 mm) 1 thin (2 mm) I added an other version with larger holes to press buttons. I encourage to download these version. The idea is to create a soft material…
This is an iPhone 15 case. I haven’t tested it yet but I aim to test it the next few days. If you make it and test it, please tell me in the comments if it fits or not.
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
Designed to work ideally with an iPhone 14 Pro or similarly sized iPhone (13, 13 Pro, 14 should be similar) to charge with Apple MagSafe USB-C charger. V2 - Added TPU Base After months of use, I wanted to revise this to fix a couple of…
This cellphone stand is designed for iPhone's and features corresponding recess for power- and AUX-Cables. Printing Recommendations: 0.2 mm layer hight, supports needed (touching buildplate), 15 % infill. Print from PLA will work fine and…
This model is free. If you appreciate this model, please leave a download and a like! iPhone 14 Pro and iPhone 14 Pro Max. Stylized dummy phones to see if it fits in your pocket/purse/bag/jacket. Based on measurements and reference images…
I'm not too fond of cases that cover the entire back so this one will still work with a MagSafe charger. You will need to flip the case 180 degrees on the print bed so that the phone back lays on the print bed. No supports or brims…
This self-designed flexible case fits perfectly on the Apple iPhone 13 pro (iPhone 14 pro version included as well). It offers precise cutouts and covered buttons that are easy to press. I had to experiment with the print settings quite a…
D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…
This is a remixed/edited phone stand that I configured to use at my desk for my iPhone XR that has a thick case on it - the original just fit the bare phone without a case. Widened the body a little too for support. Printed on my prusa…
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? other iphone 16 series models: iPhone 16 Pro https://www.printables.com/model/1003040-iphone-16-pro iPhone 16 Plus…
D: Schutzhülle für das Apple iPhone XS und iPhone XS MAX. Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone XS and iPhone XS MAX. I printed the case in PLA…
This case was printed with ninjatek ninjaflex (85A) TPU. I printed this very slowly with my Ender3 with a bowden extruder. I had the best results printing the case with the pattern facing up and filling the other side with support.
My first attempt at iPhone 15 case. My daughter got a new phone, and the case (ordered online) was not due to arrive for a couple of days. I had a reel of flexible PLA, and figured that I could print one. But I couldn't find any existing…
This is a remix of Scott Yu-Jan's iPhone Dock, adjusted for iPhone 12 Mini. For original design: https://makerworld.com/en/models/615378#profileId-538769 Special thanks to @jlf_cleaner_1966931 for the cover photo!
I like a minimal case, but wanted to have a design on the pack. This one can be printed in PLA as is, no supports, and can just snap on. It's a tight fit, but will fit. The “Camera Bump" is to help protect the lenses, but is printed…
This is a Remix of the iPhone Standby Mode Dock by Scott Yu-Jan . I have changed the dimensions so that an iPhone 13 with a case fits (152x78mm). At the top, there’s a slot for an Apple Watch charger, allowing you to charge your AirPods.…
This is a flexible case for the iPhone 12 Pro Max. This must be printed in TPU, TPE, or other flexible materials including some nylons. Do NOT print this in PLA, PETG, ABS, ASA, or any other material that is not flexible. You may not be…
iPhone XR - 3d Model based on apple guidelines. STL and STEP file is attached.
Just a simple MagsSafe phone stand with the infill visible. Use the .3mf file to specify an infill that suites your taste. Adaptive Cubic is my favorite infill for this model. Printed at .3mm with supports using Eryone Navy Blue Matte…
UPDATE 14/9/'24: tweaked button positions. UPDATE 25/11/'24 made screws flush with body and fixed speaker holes Want to get your hands on an iPhone 16 Pro before anyone else does? Got you covered! This model is a full scale model of the…
iPhone 14 cover. Only for standard iPhone 14, NOT for pro, plus or max. Side note: I couldn't test this cover because I don't own an iPhone 14. This model is based on my iPhone 13 cover ( iPhone 13 Cover by gravity | Download free STL…
I couldn’t find any model for an iPhone 14 plus case so I created this one. Printed this for my phone and it fits like a glove. I included 2 versions so you can chose the one you like most. Only difference is on the back of the phone. One…
This is a iPhone 12 Case that I know fits and fits well. I printed mine in PETG Clear on my Prusa MK3s. Print instructions Print in PETG, and it will snap right on your phone.
Remix of my iPhone 15 Pro Case, but for the 15 Pro Max - I dont have one to test on, so please let me know if any adjustments are needed. ---------------------------------------------------------------------------------------- Ultra Slim…
Remixed from TheLightSpeed! to get a more bumper type feel. Print instructions print in whatever material you want. should snap in tight.
Magsafe Link : https://www.amazon.com/gp/product/B09FZ5Z7S4/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
A very simple yet elegant stand for the iPhone - specifically designed for the iPhone 12/13 Mini initially, but works for all MagSafe iPhones (Not sure about the new 15 Pro Max, that might be slightly too tall in vertical mode; it will…
This is a desktop stand that can accommodate an Apple iPhone Magsafe charger, Apple Watch Charger, and Airpod Charger (through lightning). The design was originally made by JIPyro and posted on Thingiverse. I have modified the design and…
iPhone 15 case with lens protection.
I've added one version with a inbuilt nut and another with knurling. The internal valve should be printed with 100% infill. The included .gcode files are configured to print the valve at 100% infill, while the outer body is set to 4 walls…
Update: I've uploaded a additional version of the case with a tighter fit Remix of a Iphone 13 mini case I found online. The original model has a flat backside, wich leaves the cameras of the phone sticking out and exposed. To fix this,…
No supports needed 20 or more infill. You want the case to still have flex, as it's a tight case to ensure your iPhone is safe. 0.2mm Resolution Test the case with your phone thoroughly , to ensure your phone is held securely within the…
remodel v2 with larger hexagon style and add a lens protection Buy me a coffee: https://paypal.me/leositu Thank you!
This is the base iPhone 12/12 pro case I designed. It fits securely and protects camera lenses. has a very satisfying snap when installing the phone :) probably best to print in PETG as its a bit more flexible than abs and stronger than…
Scale model of the iPhone 14 Pro and iPhone 14 Pro Max, dimensions from schematics posted online, so you can print and accurate dummy of the smartphone.
I designed this to be a thick bottom to print flat with no supports but to also have protection for the camera. Iphone 16 pro max case
This model provides a representation of the overall dimensions for the iPhone Duo, to evaluate how it feels in the hand, and whether or not it will fit in your pocket. It was modeled using overall dimensions announced by Apple (not a…
Originally published here: Apple iPhone 6s & 7 & 8 & SE 2020 case by tato_713 - Thingiverse For the regular iPhone 6 Plus, 6s Plus, 7 Plus and 8 Plus, see this . This case was tested only with the iPhone 6, 6s, 8 and SE (2020), but it is…
This is a flexible phone case for the Apple iPhone 15 Pro. It optionally supports the addition of an adhesive metal MagSafe ring in the back pocket, and has a separately printed inlay ring for lens protection. The main case is meant to be…
Last year I designed a case for my iPhone 11 Pro that I really liked ( https://www.prusaprinters.org/prints/21979-iphone-11-pro-case-updated ). I've upgraded my phone so I needed to create a new case. This design provides protection for…
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
My design for a stand that holds both the Apple iPhone MagSafe and Apple Watch wireless chargers so you can view and charge both devices at the same time. It holds both chargers flush with the front face of the stand and features a groove…
Print with backside down TPU at 120 or 200um layer height. The infill can vary depending on how flexible you want the case to be. Ex. 20% is very flexible and easy to insert, and 100% is much stiffer. Overture TPU worked well. Print on a…
Note: For an updated version of this concept with upgraded fit, please visit the below link: https://www.printables.com/model/811094-updated-iphone-15-phone-case-verified-fit-customiz This model is meant to be a platform for creative…
Simple iPhone 12 Mini case. Print instructions No supports needed.
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
The design is a simple DIY iPhone 13 Mini case using a blend of PLA/TPU. The PLA forms the hard shell, while the TPU is used as padding for impact and slip purposes. Every edge has been blended to eliminate snag points on other case…
Eine weiter Hülle nur diesmal passend für das iPhone X/XS. Auf der Kamera Seite steht die Hülle zum schütz über. Auf der Display-Seite sind wir mit dem Display bündig (Achtung Kratzer Gefahr). Die meisten nutzen aber meist sowieso ein…
I printed it with the back side (with the triangle pattern) away from the build plate which required more support but resulted in a much nicer finish for the exterior of the phone case. the case with the hole punch out is what I used the…
Originally published here: Apple iPhone 6 Plus & 6s Plus & 7 Plus & 8 Plus case by tato_713 - Thingiverse For the iPhone 6, 6s, 7, 8 and SE 2020, see this . This case was designed using as reference the iPhone 7 Plus, and a commercial…
Project Description Secure your new iPhone 17 Pro immediately with this custom, high-precision 3D printable case featuring a sleek, minimalist aesthetic! This protective case is precisely modeled on the latest design specifications…
Best fit with apple leather case Prints without supports on the side. I added Gcode for Prusa Mini and i3 Mk3s If you want a stand for just the iPhone: https://www.prusaprinters.org/prints/128413-iphone-stand
Project Description Be one of the first to get a custom case for the new iPhone 17 (Standard) ! This is a protective, minimalist case, optimized for 3D printing and precisely modeled based on the Accessory Design Guidelines (ADG) to…
iPhone mount for bike handlebar for phones with a case. Easy clip in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount. You will need additionally 4x M3.5 x 16 screws (ISO 7046) 4x M3.5 nuts…
D: Schutzhülle für das Apple iPhone 7 plus+ und iPhone 8 plus+ Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as…
Easy to print dummy model of the iPhone 15 Pro Max. Print as oriented and no supports needed. Perfect fit in original case.
a dummy model of an iPhone 17 Pro
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
