34 modeli
EN: LED Lightbar for Prusa i3 MK2, MK25, MK3 This is an easy-to-snap light model for the printer frame. Note that there are differences in frame width of 5 mm on each side between the MK2 and MK3. For this reason, two sets of models are…
The BMW R1200 GS K25 miss 2 covers on the frame on the right side. Decided to design and print 2 covers to fit there. I print them in PETG 0.2mm. If you print it share here the result in the make section. Enjoy.
--NOTE: so... updating on multiple sites sucks. so i'm not going to keep this repository here up to date. if you want the most upto date version, i'll maintain the cults 3d version. so google for that one-- Introducing the Keccak256 Boom…
This is my version of a 3d-printed bumper for CRC CK25. It has been designed to be printed in Flex, TPU or similar. It could be compatible with other models, as long as the distance between the front posts is 60.5mm. Angled design allow…
Just a copy of the Scubapro Tool needed to insert the piston bushing when servicing a Mk20 or Mk25 (EVO) first stage. I got the measurements with calipers from a machined version of this i own. It should do the job just fine, but so far i…
Needed to replace a lost drip tray lid on my parent's Keurig coffee maker. Couldn't find a model that would work with their device, so I grabbed the measurements off another drip tray I had access to and modeled one out. I made a drip…
Protective end cap for ScubaPro MK25. Printed in clear TPU with 25% infill.
Dust cover for the PK250 based on the original cover. Inner diameter 25 mm, outer diameter 30 mm.
A replacement drip tray that pairs with the replacement lid I made earlier, which can be found here: https://www.printables.com/model/1059320-keurig-k-express-essentials-k25-drip-tray-lid
Bracket/Stand/clip replacement for the K250 keyboard from Logitech.
Catch 3 is extended enough so the plunger doesn't fall out of the inner tube. Chamfer added to inside to guide plunger and not get stuck. 10mm spacers included in case you need them. Size them how you like.
3 of some of the different brake and fuel line clips on the frame of a typical 88-98 GM full size truck. These specifically came off of a 94 K2500 6.5 TD truck. I will add any if I model any more. I printed mine in polycarbonate.
You need 2 pieces hexagon socket M5x15 screws and 2 self locking nuts. You have to stop printing the knob at 9mm height and insert a M6 nut. For mounting on the guide rail, take a M6 carriage bolt. Reduce the square of the carriage bolt…
Vibration-Dampener for Takedown when using K25 spring. the K25 spring is wider diameter than the original spring I was noticing spring 'ringing' when firing This spring guide fits over the plunger rod for a better spring fit to reduce…
Broke that little part holding ( so called.. ) VTX antenna.. And actually we dont need it. I made little gaps for faster removes etc. And the most cooler.. XT30 slot! Extended front base is for future plan of adding ELRS reciever slot.…
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
Smaller mount I designed based on official Protek25 antenna mount STL. This mount is for analog Protek25 with Frsky XM+ receiver. Printed with TPU.
Use at own risk. Category: Sport & Outdoors
With a K31 and K25, I'm hitting about 300. Not a huge increase from my single K25, which was hitting at 285 fps. It's probably because my barrel is kinda gunked up from using too much lube on the ram orings. Also, if you find the prime…
This is for adapting the filter S&B makes for the 6.5 with a 3-inch output, to the Holset 54mm with a 4-inch intake that quadstartuning sells. Printed with fillamentum Flexfill 98A, I used some duct seal around in just to make sure there…
hijinx catch 3 k25 and k26 printed plunger guide No barrel guide needed.
Building off of some excellent work done by MARZSOLT on the Prusa Mk3: https://www.instructables.com/id/Laser-Engraving-on-Your-Prusa-MK3/ I decided to modify it to fit the MK2.5 with he latest angled extruder fan. The key difference is…
GWL/POWER DC Switch ZJK250 - 250A, 48V wall holder https://shop.gwl.eu/Battery-Management/DC-Switch-ZJK250-250A-48V.html Category: Electronics
This is a simple adapter to convert a Kurzweil K2500R to use a standard 240x64 graphic LCD module such as the CRYSTALFONTZ CFAG24064A-TTI-TZ module. The K2000 used a standard sized LCD module but the K2500R uses a larger module with a…
Adding version v2 - reinforced bead mount Another version of RunCam 5 Orange mount for Iflight Protek25. This is flat mount - 20 deg. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:**…
A simple clip for the Alpicool K25 car fridge to keep the lid open when the unit is off to allow air circulation and prevent the inside from going mouldy after an extended period of being in storage. Ridiculously simple print, but allows…
This is a drop in replacement gear for the plastic one on my ice cream mixer. I pritned it in PETG on a X1C with a 0.4mm nozzle with good results. Some things to get in mind : The original design is made as it isn't easily printed on a…
This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and…
I really liked the Lynx style catch by _TK-521 when I was using a ~30mm OD 2.3mm K24 style spring, but in Australia I struggled to get access to a 1.8mm or 2.0mm wire diameter K24 spring with the right number of coils, so my best bet to…
This is a simple adapter to convert a Kurzweil K2500R to use a standard 240x64 graphic LCD module such as the CRYSTALFONTZ CFAG24064A-TTI-TZ module. The K2000 used a standard sized LCD module but the K2500R uses a larger module with a…
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
3 of some of the different brake and fuel line clips on the frame of a typical 88-98 GM full size truck. These specifically came off of a 94 K2500 6.5 TD truck. I will add any if I model any more. I printed mine in polycarbonate.
Protective end cap for ScubaPro MK25. Printed in clear TPU with 25% infill.
