Liczymy pasujące modele…
We have created a Chess Set that is great for travel and families. All the colours are 3D printed separately, so you do not need an AMS type system. (This also cuts down on printing time) First print the boards and then a set each of the…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Flow calibration tool specifically for flexi or articulating 3D prints, like our Spiders. If your Flexi models are fusing together, feel too loose, or it seems like small gaps are being fused, you likely need to adjust your Flow Rate for…
Adjustable phone stand with spring-loaded hinge and mechanical lock. The curved herringbone contact surface supports the device across a wide area while maintaining grip and controlled positioning. The indexed side knob compresses the…
3D Printed Gear Phone Stand Compact, gear-driven stand with smooth adjustable tilt and strong positional hold. ⚙ Adjustable • 🔒 Holds Position Friction mechanism: Uses a 0.5 × 5 × 25 mm helical compression spring to create rotational…
Cooling system to replace stock CS of Creality K1. No major geometry changes, just optimized for FDM printing. ========
It's a blue pig, because that was the filament in my AMS. I hope you enjoy this cute little pig from us.
The Simple Gift Box by Pork3D is a charming 3D-printable container designed to look like a wrapped present — complete with a ribbon and bow. It’s perfect for holding small gifts, jewellery, treats, or even as decorative desk storage.…
UPDATE 22/02/2023 : * Added an M5 version for z_bottom_left (as it was asked by a member) * Added my M3 & M5 printable T-nuts for help (print and insert std hex M3/M5 nut) --------------------- I had hard times with banding on all my…
This Telescoping Star is the perfect fidget toy or unique Christmas ornament. Designed with concentric 5-point star layers, the model expands from a flat, coaster-like object into a 3D conical star structure. The precise tolerances allow…
This is a fidget heart with a place to attach a key ring if desired. Print Setting No Supports
Adjustable phone stand with integrated spring-loaded clamp and mechanical lock. The curved support and textured contact surfaces hold the device securely while allowing fast placement and removal. Angle adjustment is controlled through a…
I wanted to upgrade my Ender 3 Pro to linear rails so I picked up the UniTak3D Ender 3 X-axis Linear Rail Conversion Kit from Amazon https://www.amazon.co.uk/UniTak3D-Upgrade-Conversion-Carriage-included/dp/B09M73XRBH It worked well and,…
Minimalist curved phone stand designed for ultra fast printing and everyday reliability. The continuous bend geometry supports the device at a stable viewing angle while keeping the footprint small and balanced. Smooth rounded contact…
Hi! Disclaimer! This mod is possible if you are running klipper, because CR touch position is changed and as far as I know, it is not possible to edit in stock firmware. I wasn't happy with performance of any available cooling duct for V3…
Clean, minimal remote stands designed to organise multiple remotes in a compact footprint. Each caddy keeps devices upright, separated, and easy to grab while maintaining a tidy, clutter free surface. The angled form improves visibility…
The second of our initial constructor brick sets - the Fighter Jet! Build it either by our model or in any configuration or size you want - want to have more wings, or even turn it into a hovercraft? Just print as the bricks you need, as…
Our first major constructor brick set - the Drag Racer! Build it either by our model or in any configuration or size you want - do you want 6 wheels or 2 engines? Just print as many as you want - once you buy the files, their yours…
Remix of "Aquila X Limit Switch Cover" by JordanBreitling ( https://www.thingiverse.com/thing:5446636 ). I have an Aquila X2 which I bought a CR Touch for. I had to replace the Hot end bracket with the UniTak3D bracket (…
The new and improved Dragster from Brick3D - now lower, sleeker and meaner! This set is chuck-full of new parts, including slimmer wheels, a new T-shape and some very specific triangular bases. Keep an eye out for the new color-ways we'll…
Spherical MagSafe stand designed for the Apple MagSafe Charger with braided cable . The angled magnetic face supports stable attachment while keeping the device elevated for clear viewing, charging, and interaction. The textured lattice…
adaptation for kingroon KP5L write your remarks in the comments you will need 5 brass threaded bushings M4 Category: 3D Printer Extruders
Start your collection with the small, but mighty Bonsai Plant Pot! This beginner set gives you a flexible variety of parts which you can use for much larger projects as well! When you're ready to expand your arsenal - check out our Drag…
⌚ Apple Watch Charger Stand – Lattice Edition This version of the Apple Watch charging stand features a striking lattice mesh texture that gives it a modern, lightweight look while remaining strong and stable. Designed for support-free 3D…
This is a remake of the original model by Dmitry Sorkin (K3D) for the standard, volcano and K1 hotends.
Why this print head? Fits any 3D printer, that uses ender-3 ot similar hotend Printhead can be removed for service by unscrewing only 2 screws Easy to print - no supports needed Improved air flow for both hotend and model cooling BOM BMG…
This is a multi adapter to hold various sizes of glass bottles in your Yeti Colster Insulatied Can Cooler. Simply slip over the top of the glass bottle, it flexes to size and then rotate into place. I found it fits most long neck bottles,…
Keep one keychain tidy. Split keys into 3 separate loops so you can organise by car / house / shed / work without the bulk. 🔑 Compact • 🧵 TPU • 💪 Tough & Grippy Printed in TPU for AMS — tough, surprisingly rigid, and still has that little…
This is a remix of the K3D Sprite Dual 5015 model originally by Sorkin . Then lower duct part is used from the seperated duct version and the upper mount part from the CHC hotend mod version as it has a few optimizations and mounting…
This is mainly for my custom hotend. Sprite extruder with CHC heater. The two fan paths have been separated. The ducts are 5mm longer to center them on the nozzle. The air outlets are 3mm closer to the nozzle and have a 20 degree angle.…
⌚ Apple Watch Charger Stand – Fine Edition This refined Apple Watch charging stand features a clean, vertical ribbed texture and a smooth rounded dome that holds your watch securely while it charges. Designed for support-free 3D printing…
A set of three lightweight 3D printed bookmarks designed for durability and smooth page handling. Each model uses a different perforation pattern that gives a distinct visual style while keeping material use minimal. The bookmarks measure…
The left and right side have been separated so each fan has it's own path. No other changes made.
A simple two-part gift box designed for standard gift cards, folded cash, or other small flat items. The main shell opens to receive the contents and the wrap piece slides over it to secure everything in place. The wrap includes a raised…
Are you ready for a new constructor brick experience? Try out this Brick3D Demo and discover the power of 3DP-optimized bricks that you can reprint in any color, any size, any number of times you want! Files marked with "PP_B" are for the…
Minimalist fixed-angle phone stand designed for fast, reliable printing and everyday use. The single-piece geometry supports the device at a stable viewing angle while maintaining a very small footprint. Smooth contact surfaces distribute…
AP375GN - AussiePal Great Northern - Pork 3D 001.stl The AP375GN is a custom-designed adapter for the TherAussiePal can cooler, specifically tailored for Great Northern bottles. This adapter provides a secure fit and impeccable…
A 3D printable table tennis bat designed for a lightweight build and fast, support free printing. The paddle uses an exposed rectilinear structure that reduces material use while keeping the hitting surface stiff and responsive. The…
CK3D did a great job to add a second z-axis on a prusa mini. But like on the original design from Prusa, the z-top does not fit, if you use a direct extruder (like the sherpa mini), as the directextruder would bump into it. In this…
All config changes are same to model origin. PRINTS WITHOUT SUPPORTS (MOUNT FOR 4020 WAS UPDATED) There are models for 3 types of hotends: Stock hotend K1 hotend and K1 nozzle K1 hotend and E3D VOLCANO nozzle (I am using this one) I tried…
Print Petg 0.15mm structural 0,4n I printed with transparent filament, chose 9 perimeter and 10 solid bottom layers. Otherwise, the default prusaslicer profile. I recommend smoothing the thread with P220 sandpaper or abrasive wool, then…
led unitak3d pour prusa mk3 mk3s+ nécessite l achat de la barre led https://www.amazon.com/UniTak3D-Printer-Embedded-Upgrade-Creality/dp/B0B3X9CKWW PETG 0.25 remplissage 100%
The Apple Watch Charger Stand by Pork3D is a compact, support-free 3D printed stand designed to hold your Apple Watch securely while charging. Its rounded shape and textured surface give it a modern, HomePod-inspired look, and the snug…
This compact Cable Winder is the perfect solution for keeping your charging cables neat, protected and tangle-free. The cable winds smoothly into the centre spool, storing it cleanly inside the body so your desk, drawer or travel bag…
This compact Cable Winder is a simple, satisfying solution for keeping your charging cables neat, tidy and tangle-free. The cable wraps smoothly into the centre of the winder, leaving a clean and compact shape that’s perfect for desks,…
iPad / Tablet Riser Stand A clean, sturdy tablet stand that lifts your screen to a better viewing angle — perfect for desks, kitchens, workshops, and anywhere you want hands-free use. 📱 Tablet Ready • 🧍♂ Raised View • 🧼 Minimal Design…
NO STOCK HOTEND SUPPORT - VOLCANO ONLY Thanks to Dmitry Sorkin for the original design! Use ABS or other high temperature resistant filament. 4 perimeter or more 5 top and bottom layers or more 0.5 line width 0.16 layer height BOM: 2x…
The Orbit Collection – Modular Pen & Pencil Holders The Orbit Collection by Pork3D is a modular pen and pencil holder system designed to keep your desk organised while adding a modern geometric aesthetic. The collection includes four…
Window Blind Cord Safety Cleat (Mini) A compact, low-profile cleat for wrapping and securing blind cords — keeps things tidy and helps reduce dangling cord clutter. 🪟 Compact • 🧵 Cord Tidy • 🔩 Screw Mount Small but practical. This mini…
I really liked the K3D cooling with my original sprite pro but wanted to upgrade the hot end for better volumetric flow. I decided to go with Triangle Labs CHCB-OT and am loving it but could not find a cooling duct that I liked as much as…
BLTouch and nozzle offsets: x = 4mm, y = 43.25mm.
Re-mix of e3d buggy that does more than sit on a shelf. I am a beginner at 3d printing so feel free to re-mix and fix any problems you may find. printed wth 0.4mm nozzle, 0.2mm layer height, 3 walls and 20% infill. No supports necessary.…
Cakewalk 3D is a precise, effective and handy extruder that converts your desktop 3D printer into a food printer. We’ve succesfully tested with chocolate, meringue, ketchup, guacamole, swiss buttercream… The screw-based extruder is…
You can use original screw from the bottom wheel and locknut, though you'll need to hold it with pliers to screw it in. You'll need the original drilling guide to use with this adapter. Do note that bottom right screw ends up drilled with…
Allows for usage of KlackEnder, no other modification required to other STLs. Offset is the same. Cables need to be fed from the “top”, might require usage of tweezers, but it is possible. I made the holes for .15 variant. Either modify…
Original with BMG: https://www.thingiverse.com/thing:5172583 The only part with supports is Body and only in one spot (guess it). On the photos is the Thick version of the Body. I assume it's more rigid then slim ver but Thick ver…
UniTak3D Direct Drive Filament Runout Mount This is the 3D object that lets you mount the Filament runout sensor with the UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket . This is designed to work with the Original Creality Ender…
Catch All Tray T The Catch All Tray T by Pork3D features a striking grid of vertical pillars that form a sculpted surface rising toward the centre. This geometric structure creates a deep pocket while the surrounding pillars add texture…
This is the remix of Sorkin's printhead design. https://www.thingiverse.com/thing:5172583 His design is for E3D V6 hotend with K3D BMG extruder that fits my ender-3 gantry but won't fit my CR-10V3 gantry. So I redesigned to fit the items…
Under-Desk Headphone Holder + Cable Wrap Keep your headset off the desk and your cables under control. This under-mount hook stores your headphones neatly and includes a built-in spot to wrap up the cord. 🎧 Under-Desk • 🔌 Cable Tidy • 🧼…
All 38 flat (simple) rectangle models for Brick3D. Includes every size up to 6x6x1 height and some other sizes. There are some larger pieces, but we've avoided using them due to warping issues. Not all models have Height 2 or Hollow…
the ultimate solution for showcasing your collectible cards with style and simplicity. Designed to accommodate sleeved cards, this stand ensures your collection is both protected and beautifully displayed. The latest model has been…
I saw another use upload a make of the Chess Set by Pork3D.com and really liked their cover, but when requested by another user they never provided their STL. So I designed my own, with my next to 0 modeling skills (This is actually my…
I created this specifically to hold the UniTak3D Ender 3 3D Printer LED Lights found on Amazon here https://www.amazon.ca/dp/B0B7B1QG5Q?psc=1&ref=ppx_yo2ov_dt_b_product_details . I didn't like the way they just laid in the gantry rails so…
Introducing the magical world of Link3d Tiles - where imagination comes to life and creativity knows no bounds! Unleash your inner architect and engineer as you connect, stack, and expand these versatile tiles to construct extraordinary…
All (51) tapered/shifted bricks of various heights. Supports are integrated. Sizes are varied based on how we used them in our sets, so it doesnt include very possible size combo like the flat rectangles. Collection can be expanded with…
Catch All Tray Q The Catch All Tray Q by Pork3D features a lightweight honeycomb lattice surface that creates a modern geometric look while keeping the tray visually open and airy. The hexagonal structure adds texture and depth while…
Unitak3D sells a two bracket system to convert the Ender 3 printers from Bowden to Direct Drive. The top bracket has two positions either for single or dual gear extruders. When I changed the cooling system using Hero Me G7 I found that…
MINI-CK3D-z-bottom-left (M5 version) upravený pro použití s sadou https://www.printables.com/cs/model/45555-squash-ball
download the zip file it has a material list plus both versions of this model, and some pictures. have made a uploade the batton for the wheel system. v3 has smaller wheels and and will not get stuck in the baton
This is a remix of the dual 5015 cooling solution for the Sprite extruder. I added a mounting hole for an 8mm endoscope.
All (41) triangle bricks of varying sizes. Supports are integrated. Varying sizes up to 6x6. ZIP File added to Other files. Most sizes are H1 and don't exceed 6x6 to avoid warping and be easy to pair on the printer bed with other bricks.
Decorative rabbit sculpture with a clean vertical form and fine ribbed surface texture. The elongated silhouette and smooth curves create a calm visual presence that works across modern, minimalist, and neutral interiors. Designed as a…
This mount is specific to Unitak3D direct extruder. It will slide on the Unitak3d base plate. Print with minimal support. No screws needed but for a more rigid installation use the m5 slot. If you do u need to drill trough the Unitak3d…
All (currently 6) angle adapters for various angles. More to come soon. Supports are integrated. ZIP File is included Feel free to request more adapters as needed
Легендарный мод головы от Дмитрия Соркина на принтер Anycubic Chiron. Вот руки добрались и до него! Версия под вплавляемые втулки М3 диаметром 4,5 мм. В каретке одно отверстие нужно рассверлить сверлом 3,2 мм.
https://www.amazon.com/dp/B09M73XRBH?psc=1&ref=ppx_yo2ov_dt_b_product_details UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar I got one of these kits because I installed a BLV rail kit a year ago and the rails were crap. So…
Pretty Basic I altered the ducts to support a single 5015 fan including cutting and rotating the mount to fit a single fan, also the ducts are more centered up on the nozzle than originally. Also made a better fit for the fan duct to sink…
abstandslehre um Nozzel und Lüfter (K3D) auf den Richtigen abstand zu bringen (1mm). Einfach von hinten aufs Bett legen ( Z-Offset vorher einstellen und anfahren) ---- distance gauge to bring nozzle and fan (K3D) to the correct distance…
I was not happy with nozzle mounts on the revo system as the spring just doesnt put enough pressure to hold the ADXL in place while running IS tests. I also wanted something a little closer to the center of gravity for the toolhead.. This…
Festive season or not, this new demo has some universally-useful new parts, not seen in any of our sets yet. Splitters/mergers - from 1to2 or 2to1, align and arrange even and odd rows as you wish Pass-through wedges - you can now taper…
While shortly using the Unitak direct drive gantry mod plate on my Ender 2 Pro, i wanted to test how much quieter two 4020 sunon fans would be compared to the stock 4010 and 4010 turbo that came in the machine. That goal was reached here,…
The Apple MagSafe Stand is a compact, sculpted charging stand designed specifically for the Apple MagSafe Charger (braided cable version) . Featuring a smooth curved profile and a clean integrated MagSafe puck recess, it turns your…
Are you ready for a new constructor brick experience? Try out this Brick3D Demo and discover the power of 3DP-optimized bricks that you can reprint in any color, any size, any number of times you want! When you're ready for more - find…
On my Ender 3 Pro the black aluminum spacers are a fraction of a millimeter larger than the hole for the eccentric nut in the back plate. The other 4 holes are fine just the two for the eccentric nuts might be a problem. I decided to make…
Direct Drive mount for the UniTak3D Ender 3 Direct Drive Conversion gantry. I purchased this direct drive gantry to give me a more sturdy mount and then designed the direct drive mount for it. Link for Direct Drive Gantry:…
A little comparison, the red model is the original one I printed out a year ago. I shifted the nozzles so that they were in the center of the nozzle. I made the walls thicker I made holes for thermal inserts Redesigned the planes for fans…
Catch All Tray E The Catch All Tray E by Pork3D features a flowing ripple pattern that spreads outward from a soft central pocket. The sculpted waves create a smooth organic form while naturally guiding small items toward the centre. The…
The Provok3d nozzle mount is conceptually really nice. It's simple to bolt in where your nozzle goes. For most nozzles, that's great. For something using an E3D V6 (or more likely Dragon) heater block, the recommended installation…
Squircle Mouse Pad – 240mm A minimal desk essential shaped with intention. The Squircle Mouse Pad blends the softness of a circle with the structure of a square, creating a perfectly balanced surface that feels natural under hand and…
Simple remix for Unitak3D Direct Drive conversion for better cable management
Port Pick (Pocket Cleaning Tool) A tiny, handy tool for cleaning pocket lint and debris from charging ports and tight gaps — quick, simple, and made to keep with your tech. 📱 Lint Fix • 🧼 Quick Clean • 🧰 Pocket Tool Ever had a cable that…
After extensive testing, I created a calibration print for the Flexi Flow Calibration Tool V4 by CK3D . After trying many different settings, I realized that this model could not achieve the desired quality with Creality Slicer , so I…
Datos en español: este es un jazz pequeño que escala con los legend class, o si quieres puedes agrandarlo en tu edito donde lo imprimas, Realmente no importa. está basado en el jazz de transformers 1984 en su modo auto cybertroniano, que…
Основа головы легендарного мода от Дмитрия Соркина на Longer LK4. Адаптация произведена с минимальными изменениями под вплавляемые втулки. Добротная голова, рекомендую!
CatGuard Mouse Pad by Pork3D is a playful desk accessory designed for anyone whose cat loves to invade mouse space at the worst possible moment. The raised curved barrier helps protect your active mouse area, creating a defined zone that…
Cable holder for K3D sprite cooling system (left side)
First I printed this model here: https://www.printables.com/model/550466-unitak3d-direct-drive-filament-runout-mount but it is not suitable for the dual gear extruder. I have designed a new one that is also a bit stronger. I printed it in…
Catch All Tray R The Catch All Tray R by Pork3D features a smooth sculpted surface that flows toward a soft central pocket. The gentle curves create a calm organic form while naturally guiding small items toward the centre. Its asymmetric…
![Voxelab Aquila Orbiter V2 E3D V6 Dual 5015 [K3D BMG Remix]](https://media.printables.com/media/prints/977807/images/7484313_ab09a21b-da71-4485-a48a-9de009309e82_07450afb-9f5d-4da3-a8e4-04842ef5b033/image.png)
