Liczymy pasujące modele…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
4 inch to 5.25 inch speaker adapters designed for Stern LCD Pinball machines to upgrade the Pro or Premium speakers to the LE size. ***Remixed to work with Kicker CSC5 5.25 speakers. Holes are sized for an M4 bolt. You can either counter…
UPDATE - Also fits Well Pro AK12 . Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some…
fingerboard kicker a good obstacle that can be used in trick lines
Required M8x20mm Bolts (4 of them) This will mount the Amp in either of these https://thebuttkicker.com/products/buttkicker-gamer-pro https://thebuttkicker.com/products/buttkicker-gamer-plus Simply print two of the 3D model and you are…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Since my daughter loves the Supermario characters and table soccer, I started to design a DIY soccer table with the Nintendo characters as a christmas gift. I designed the bearings in a way, that they can be easily dismantled without any…
The high detailed Ball need some Advanced printing settings. I also added a simple Ball for no extra setting needed. Just play Soccer in the Office. Why you ask? Why not!
***UPDATE!!! → Added a extra model for the SIG XM7. The normal Speedloader will fit as well. Its just so you have the right description on it. Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by…
Unscrew original feet, attach 2-4 of these with countersunk M3x12mm screws. Can be rotated to different orientations depending on desired position. Screw onto rig using the same number of M6 bolts and T-nuts. Note: provided STL is a bit…
I printed this with 15% infill out of PETG.
A simple holder for the ButtKicker Amplifier Remote Control. The slot that holds the remote is on a 45 degree angle so no supports are required for this print.
Hi Internet Sim Racers. I've whipped up something I think you'll like.... So I've recently upgraded to a motion sim and a mate bought a ButtKicker... Since I was already running quad Pucks for my sim rig. I have two spares that I…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A remix from the playseat version. Quick and dirty made because I couldn't lay it down anywhere near it where I could I could reach it. Modify it to make it better if you want. Print Settings Printer: CR6SE Rafts: No Supports: Yes…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Side mount for Buttkicker amp with room for wire passthrough and heat ventilation. Print PETG 4 perimeters / 15% infill. Print x2
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: Remix from Lee Single Stage Kicker V2 by Wackadoodle . I extended the…
Designed E46 front door speaker adapter brackets for Kicker 5 1/4". Used in my E46 325Ci (coupe) BMW OEM speaker size is 6 1/2", Kickers are 5 1/4". Advised to use foam adhesive tape to seal the edges, and reduce any vibrations that could…
Being a car audio guy, I had to print the car audio logos High_Caliber on Thingiverse designed. Unfortunately, I could not find a Kicker logo. Inspired by High_Caliber, this is my take on a Kicker logo. I designed it in two parts, The…
Perhaps one of the old school stoners remembers that in those days you often smoked the blunt/spliff/herbal cigarette through your fist. In the meantime this has changed a lot, at least in my region, because you don't want to have the…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
UPDATE - With help of the commiunity, the Front Loader design could be improved to load easier. Thanks to "Delta Mike" of the Heavy Recoil Club! Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by…
***Had to name it in this wierd way, because Glock is very protective of its name. I should've expected this beforehand, the biggest producer of ...."Horse milk".... will be a bit awkward when its about reading his own name. "Big Stick" -…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
***Update 09.06.26 Edited the model so it will also fir UMP 9 Magazines. Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't…
This 3 piece kit allows you to mount the ButtKicker mount onto your seat without drilling it. Print the files, use the seatbelt trim included with your seat, and add the following: M8 x 60mm Allen style bolts (2) M8 Hex Nuts (2)…
The original bearings of my old Hudora foosball table from 2011 or 2012 bothered me right from the start. The rods had an excessive amount of play in the bearings. Before considering a potential replacement, I wanted to try a bearing…
Hi Internet Sim people... This one is a request by kakemiks on the Simhub discord channel. It's a test model but have a go printing one and leaving feedback. This is for the Sinus live Bass-Pump III Shaker…
This is a piece designed to mount a ButtKicker Mini LFE to a 2-inch tube on a sim racing cockpit. You can see by the photos why this is advantageous to get good separation between the left and right front wheel vibrations. The cockpit…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Ein nachdesignter Tischkickergriff. Wellendurchmesser=6,5mm, Lochtiefe 85mm A redesigned foosball table handle. Shaft diameter=6.5mm, hole depth 85mm
Replacement propeller for ThrustMe Kicker and ThrustMe Cruiser. Potentially can fit ThrustMe Thruster. Features: Go faster, go farther — toroidal props are much more efficient than conventional ones More quiet — even less noise from your…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
small Fingerboard Kicker
this is a mini kicker for fingerboarding it is very swag and epic
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A friend asked me if I could fix a part of his damaged pinball machine.
I added a raised edge to the design by tom janssens. Its design was already very good as a urine shield. But our cats like to dig out the litter box, and this raised edge means that this is also a thing of the past.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
This is a 4mm thick spacer for the af16/af18 kicker cover. Needed when spacing the CVT instead of using washers. I would recommend printing in ABS/ASA. I have not tried with any other materials.
For my friends from Offenbach/Germany :-) If you want to do a 2 color print, please create your gcode and upload it to: https://www.prusaprinters.org/color-print/ and add a color change to layer height 1.2mm Category: Coins & Badges
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Benötigte Teile: 1x M5 Gewindestange 45mm 1x M5 Selbstsichernde Mutter (zum freien positionieren des Kickers - nicht festziehen) Beilagscheibe(n) 5mm (zum ausdinzanzieren des Kickers) 2x M6x25 Schraube 2x M6 Mutter Gummiband
Es ist einfach nur eine kleine Endkappe für die Führungen von einem Tischkicker. It is simply a small end cap for the guides of a football table. Druckt es am besten mit TPU 0,2mm Schichthöhe 100% Infill It is best printed with TPU 0.2mm…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Angles the mini up by 10° more. Category: Computer
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Tweeter pods seen at Slamology 2026. They contained tweeters from the QS line but these have been updated to work with the CS tweeters since they are available for purchase. I've also inculded the model for the KSC270 midrange speaker.…
A large kicker ramp for fingerboards.
Tested with ABS, PETG. No supports needed To discharge a bb, push the raised edge between the magazine feed lips.
Use the loop backwards so the cars go around smoother.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
This is a plastic protective piece you can place under your upper middle plastic to help protect the left side of the art plastic on Elvira and the Party Monsters. It it placed under the artwork and wraps around the left side to keep the…
ButtKicker Mini holder for Sparco sport seat. You should print 2 of them and use M6 bolts and Nuts. The bolts should be with plain head in order to not be noticeable under the cushion.
A copy of the original handle for 16mm rods. Prints without support. For wood inlay but works fine without.
This is a remix of https://www.thingiverse.com/thing:4303004 by Shaykz. A holder for the Buttkicker Gamer 2 remote with a pipe clamp for the Playseat Challenge. I used some double-sided tape within the clamp. Print Settings Printer Brand:…
A Buttkicker GAMERPLUS mount to be bolted directly into the seat instead of the frame of the rig. It has been going strong for more than 1 year now, without any issues. An optional Support clamp is there, albeit I have not used it. Other…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
The FIFA soccer world cup goes into the finals, and it's time to step into the action. Grab some pencils and some colleagues, friends or kids, and keep up the game in the half time break. A you have the pencils ready you can just draw a…
Schieber zur Anzeige des Torstandes als Ersatzteil für einen Tischkicker. Mit Rastnase von unten. Maßangaben in mm. Print instructions Category: Replacement Parts Summary Schieber zur Anzeige des Torstandes als Ersatzteil für einen…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Die kleine Box bietet genug Platz für fast alles, was man am Tisch so braucht. Hinein passen 2 Bälle (zumindest die Leo ITSF), 4 Griffbänder, ein paar Abschlussringe und eine Münze (2ct, 5ct, 10ct). Für den Zusammenbau braucht ihr zwei…
A simple USB-powered scoreboard for tabletop-sportgames like Tipp-Kick or similar. I used an arduino nano, a 16x02a-LCD, a littel 12mm piezo speaker, two 5mm LEDs, a potentiometer for adjusting the contrast and three buttons. The code,…
Butt kicker remote mount for a 40mm rail. Sized at 41mm. Secure with double sided tape or a zip tie blow.
***Made to fit Golden Eagle, WA-Spec Magazines especially. This one was a bit challenging, first it goes easy, but it will need more force, the more BBs you load into it.. Don't you hate to load your GBB-Magazines with a wild three-piece…
Case Kicker that ejects to the right, and kicks at the end of travel to allow for longer cartridges. Interacts with the Press handlebar, so the handlebar must be completely vertical when in the up position. Decapping Primer ramp included,…
Für Zusammenbau: Teil 1 + 2 mit Superkleber verbinden 3 Stk M4x16 Schrauben 3 Stk selbstsichernde M4 Mutter Gummiband Schraubverbindungen nicht festziehen. Alle verschraubten Teile müssen beweglich bleiben.
Wanting to give your balls a boost? Introducing the ball kicker for the Hubelino ball system! Note: Tested with 24mm plastic marble and 3D printed Hubelino parts. Any feedback would be appreciated.
The Logo of the german footballclub "Sv Kickers"
I wanted a way to keep my Kicker Core v2 power brick off the floor and tidy up the cables a bit. I included hole for zip ties to keep everything together.
use 10-20 fill and see how low ur printer can print. best printed with small noz. size it up idk why its small.
This part is for a children's kicker table. It avoids the ball being stuck in the corners. Print instructions Scale it for your table. Mirror it and print two of every orientation.
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
This print will hold a Kicker bass knob and fit into the hole in the dash where the USB and aux input sits. You will need to remove the USB and aux inputs for this to fit. This should be printed in PETG or another higher temp material.…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Nachdem an dem Tischkicker der alte Punkteschieber defekt war habe ich einen neuen erstellt.
Simple mini ramp for use with all fingerboards and bmx bikes. Really easy to print with low infill for less material usage. Follow me for more tech deck skate park accessories being uploaded all the time test printed for quality You may…
Leg extension to raise / elevate our kicker table
Kicker includes a bracket for Subaru with these speakers but it didn't fit my 2018 Legacy. This should fit other Subarus around the same year. I designed this as a 2-piece solution so there's no extra hardware needed and the speaker sits…
I made models of grip handle and lid for soccer game table. Inner diameter is 18 mm, therefore it fits very tight and not loose during tough game. Enjoy..
Der alte Leonhart Kickertisch hat in der oberen Platte 4 Löcher mit ca. 16 mm Durchmesser. Ich denke die waren ursprünglich für Aschenbecher gedacht. Nun wird heute nicht mehr geraucht und schon gar nicht drinnen. Für diese Löcher gibt es…
für 3/16 Inch / 4,762mm Kugeln
Hey all, here’s a simple project people might find useful. I got a buttkicker gamer 2 for free with the amp (I am very lucky) but it didn’t come with the proprietary cable support wanted to charge me $26 plus shipping (!!) for. So, I…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
She's sized to fit alongside your 6 incher (6-inch ACTION FIGURES, ya frickin sickie), but don't get her too close to them or she might just rip their little vinyl heads off SHE MEANS BUSINESS
Pieza para reparar juguete para gato, Cat toy piece
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
The folding Foosball/Kicker table "Ullrich Compact" lacks a space for the balls when folded. This holder holds 5 balls.
Designed for a colleague of mine who kicks ass. The crankshaft might need to be slightly sanded for operation.
I ended up recreating the models from scratch. I fixed the scaling issues and updated the distance between the holes to 65 mm (Mounting points for BUTTKICKER 4080 universal mount post). I also reduced the length of the insert by 1 mm to…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
Simple easy 1x4 holder for aerosol zipkicker, tolerance is pretty tight, added a small pocket for extra tips or other things. Fits next to my CA glue holder No supports needed, printed at 0.3 layer height for speed out of PLA
