RamjetX PucKicker for Sinus live Bass-Pump III Shaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi Internet Sim people... This one is a request by kakemiks on the Simhub discord channel. It's a test model but have…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hi Internet Sim people...
This one is a request by kakemiks on the Simhub discord channel. It's a test model but have a go printing one and leaving feedback.
This is for the Sinus live Bass-Pump III Shaker
I don't physically have one, so this model is made from a photo of the product and some measurments provided to me by kakemiks.
It is MUCH bigger than the original dayton puckicker... so its designed in 3 parts for printing. Bolt it up with 8mm bolts for strong connection. Use some washers too so you don't crush the plastic.
Make it really strong... those shakers are FAR more powerfull than the pucks. Especially if your to back to back push pull shakers.
Anyway... let me know how my educated guessing went for the model dimentions.
RamjetX
Category: Hobby