Liczymy pasujące modele…
I build faster, more agressive propeller for minn kota trolling motors (my is minn kota 50lbs, can be installed on other models. That is first version of it. After tests I add a more pictures there. I add a small center part of if too, so…
Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…
Eine praktische Halterung für Kotanyi Gewürzgläser auf einer Kastentür. Die Gläser halten sehr gut und fallen auch nicht raus wenn die Tür mit Schwung geöffnet bzw. geschlossen wird. Sehr übersichtlich, platzsparend und leicht zu…
🇺🇸 Welcome to the Midwest! St. Joseph's Cathedral of Sioux Falls, South Dakota in the United States is a catholic temple built in the XX Century and recently restored. It is one of the greatest landmarks of the city, along with the Sioux…
USS South Dakota was launched June 7,1941. South Dakota took part in in many battles in the pacific such as Battle of Santa Cruz and Iwo Jima. Print Settings Printer: Prusa MINI+ Rafts: No Supports: No Resolution: .05 Infill: 100%…
Wanted a phonecase for my cyberpynk halloween costume. Case is made for a galaxy S20 FE, but f3d file is included for remixes. 15xm3 sqrews were used with 2xm5 heatinsert for antenna cable fitting. i also used two magnets to make the…
This is a gift. I added the Minn Kota logo for the recipient. There's a blank version as well. I used a wide brim on the top files because I didn't want the print to fall over due to a narrow base. I also lined the top of the print…
North Dakota, USA (ND) Topographic Relief Map with Rivers and Coastal Waters North Dakota, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
South Dakota, USA (SD) Topographic Relief Map with Rivers and Coastal Waters South Dakota, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
I created this model to reduce the weight of carrying a full Leukotape spool (4 oz) to around an arms’ length (0.4 oz).
Remixed the center section to make a five vs. three blade propeller. The blade prop is copied over from 'tamas' original. Work in progress, I need to go back and tweak the lower part of the slot, as there is a 1/32" gap at one of the…
Scientifically accurate 1:36 scale model of a dakotaraptor. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height…
Spice organizer KOTANYIand MAESTRO Print instructions Simply Print
3 blade prop (Print with honeycomb infill)
Cat phone stand / Stojak na telefon w kształce kota
This is the speed control knob for an older electric Minn-Kota Trolling motor.
Duża miska na wodę lub karmę dla psa / kota.
this dinosaur is the second biggest raptor in north america and it is playable from the game saurian
pause at layer top 4.2 for dual colors layer height: 0.2mm i used Polymaker black and Overture white PLA filament on my Creality Ender3
Kotarbau canister lid replacement for kotarbau canister without valve print gasket with tpu or use gasket o-ring 41x5mm Print settings 0,2mm layer 6walls 6 top and bottom layer no supports
Clamp (For Shaft Diameter 1.128") Used on Minn Kota Endura C2-55 5 Perimeters 100% Infill Use 2 - 1/4 Bolts. Hole on side for 1/4 carabiner (Snug Fit) Spacer for Harken Pulley Kit 5 Perimeters 20% Infill Harken Pulley…
Just a quick mecha that I threw together for use in your favorite 6mm giant robot games. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my…
Minn kota heading sensor mount to fit this type of quick connect mounts: https://www.aliexpress.com/item/1005004886346146.html?spm=a2g0o.order_list.order_list_main.126.79881802XsmKSO
Buddy wanted to replace OEM cassette deck with a CAMECHO Android head unit, but couldn't find any aftermarket bezels with snug fit while keeping head unit display centered within original dash molding, so I designed one. STL Flavors: 45…
Ein Praktischer Löffel für die Gewürze von Kotanyi im Glasbehälter. Passt Perfekt rein und man kann auch die ganze Tief des Glases nutzen. Inkl. Halterung für Wand oder Kastentür. Der Löffel hält auch wenn die Tür mit Schwung geöffnet…
Parts to hang hats on Dakota Closets shelving units. Two, 5mm x 10mm Euro screws attach the brackets to the units. Example of screws .
Iguanodontid from early Cretaceous North America, featured in Walking With Dinosaurs as the North American Iguanodon.
Minn Kota micro Remote holder
Created for MMU AMS printing. Perfect for your Dodge pickup truck.
minn kota Endura c2 30lb.. replacement title locking pin lever
A simple cover for the main screw that attaches the inner door handle to the door structure - see attached image for location. Works for front doors, as well as rear doors on quad cab trucks. Should fit any 2nd generation Dodge Dakota…
Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.
KOTARO LIVES ALONE
wydrukowanie kota zewnętrznego i tabliczka ze szczegółowym oznaczeniem dla pochodzenia, kot-czarny, tabliczka -biała, znak na tabliczce -czerwony
Minn Kota trolling motors, some of them at least, have a GPS puck to use the trolling motor in virtual anchor mode. The puck connects to the motor using Bluetooth, and the only wiring it needs is 12V power. These are typically installed…
I remixed this slightly for my 2006 dodge Dakota. I had to shorten the body to make room for my factory dome light. It's mounted onto the headliner with stainless M4 machine screws. I also resized the switch holes for 20mm round rocker…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
I already got my holders for my gpsmap device on all my N bikes. So I did not want to buy N other holders. Now I can use my garmin holders for the lezyne computer as well.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
My cousin needed a plastic arm inside a gearbox that moves the head of a mechanical ride on dinosaur. He gave me the original part he glued together and I designed this to replace it. He said it works perfectly. I do not know what this…
🦬 SIOUX FALLS ☀ If you are from Sioux Falls, a vexillologist (look it up!), have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you! This is the unofficial, people's…
The Dakota Closets system from Menard's is pretty nice, but the location of the wardrobe rods are too far forward. This template helps with drilling new holes 3" back from where they are now. Note that some of the uprights I have use…
I recommend PET-G/ASA/PC 3 perimeters, 50% infill. For assembly you will need 4 pcs of the screws M3-8mm. New handle is reinforced.
Simple stand for Kotanyi grinder with integrated toothpick holder I printed from PLA, 0.6 nozzle with 0.3mm quality and variable layer height.
If you make a modification to the speed control of your engine, this knob with the brand logo will be helpful. File designed to be printed in 2 colors
Powerbutton fix for the Garmin Dakota 20 GPS. The rubber sidewalls were gone, and the button didn't work anymore. Print Settings Layer Height 0.16 Infill: 20% Supports: No Raft: No Brim: No Instructions: Open the battery cover Remove…
A Free sample of Commander Chokotay from Star Trek Voyager. This is just one figure of a multi figure set which includes are the know Bridge crew and primary cast, as well some additional figures
made up a keychain of my dakota Category: Keychains
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This model is for a 1998 Dodge Dakota w/ a 3.9L V6 Magnum. I used it to make custom derby headers.
Show your school pride with this multi-color 3D model of the University of North Dakota Fighting Hawks logo . This is a faithful, high-quality reproduction perfect for students, alumni, and fans of UND. This model is designed to be…
This is a file I created to repair the broken screw mounting points for a manual transmission 2001 Dodge Dakota. It may work for all gen 2 Dakotas. You will need to drill out the existing mounts, but the prints should fit comfortably…
die ist ein Ersatz für den Einschaltknopf des Garmin Dakota GPS-Empfängers. Bei den Garmins löst sich gerne mal das Gummi über dem Einschaltknopf auf. Das Problem hatte auch ein Freund mit einem Garmin Dakota. Der Ersatzknopf wird mit der…
A hidden adapter that mounts an IKEA SKOTAT onto a SKÅDIS pegboard. SKÅDIS peg hooks on one face, SKOTAT mounting interface on the other — bridging the gap IKEA never filled. It sits behind the SKOTAT once mounted, so the finish is…
A 3d model resemble the Dakota crescent Every print help to Converse the old Dakota crescent
I included a 3mf with supports along the bottom and a brim at the very bottom with the model rotated and a corner cut off. This is my recommended way to print it, otherwise the top of the plunger looks awful and needs sanded. This also…
Miska dla jedzenia i dla picie
Ms Kotakos is a 3d name 265 mm long x 50 mm high x 20 mm deep. It is made with the Arial Black font with a custom scad file. I am making names for my grandchildrens' teachers as Christmas gifts. The 'Ms' is 1 mm deeper than the other…
I wanted to use the dakota 9 cube organizer as my cereal filament holder and removing one of the vertical dividers allows it to hold three additional filaments without compromising structural integrity. these printed parts cover the holes…
Sorry it's not exact. We weren't spending a lot of time on it, mostly just to collect some dimensions. Uploading in case anyone else finds this model useful to take further. This does not claim to be the same part or an exact fit…
I included a 3mf with supports along the bottom and a brim at the very bottom with the model rotated and a corner cut off. This is my recommended way to print it, otherwise the top of the plunger looks awful and needs sanded. This also…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
North Dakota (SSN-784) will be a Virginia-class submarine. She will be the second ship of the United States Navy to be n
This is the multi-part version of the lightsaber. It has been broken into different parts so they can be printed separately in different colors then glued together. There are locators for making the parts easy to glue on. The cap is…
Mount for Ikeas Skotat power strip. Featuring snaps on the back for direkt mount. Supports for the snaps are needed. Print one normal and one mirrored Mounts are 9 grid elements apart, but it is a bit wider than 9 grid elements and as I…
A Chakota. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
Use the print orientation from the file to make sure the main clamps are printed correctly. Enable supports (organic supports recommended) for the Skadis hooks
3D printable topographic miniature of Jakarta, Kota Tua and Glodok - 🇮🇩 Indonesia Capture the beauty of Jakarta, Kota Tua and Glodok 's city landscape with this topographic miniature! This 3D model represents the geographic area around…
Podstawka pod miskę do maksymalnej średnicy 13cm miski. Kąt nachylenia 12st. Podstawka i nóżki drukowane oddzielnie. Inserty wtapiane do płytki głównej. Otwory przygotowane pod inserty M4 i śruby M4. W plikach również plik do edycji w…
Designed for my dad who lost/broke some that came with it. Quick little print, may require some heat to bend the little pegs that go into the channel if its a loose fit.
Was originally designed to mount an LED on the top for visibility at night. Can be remixed to mount whatever you feel like.
Dog tags with different styles. Print Settings Supports: No Infill: 20 Filament: Overature PLA Grey Category: Animals
I don't have space for a spice rack, so I have all my spices on the same level. When I am searching for a spice, I have to move a bunch of spices around to get to the one I have. To make this easier, I created this tray that can hold 8…
Minn Kota doesn't include a cap for the i-Pilot Link cable connector if you are not able to hook it up. Print this to protect your connections from the elements. Recommend printing at .05 or .1 layer height for best results with threads.
