Liczymy pasujące modele…
This is a remix, but is not in printables, its in https://www.thingiverse.com/thing:1722395 Connector were added to connect the wings, and the head was modified to have a more easy entry. Made on an Artillery Hornet. Layerhight 0.2 and…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Standoff clamp to securely hold material for laser cutter/engraver and prevent flashback. Designed for Epilog Pro Laser Bed. May work on other honeycomb. Tapered from 5mm to 7.5mm. Holds material to be engraved and/or cut in 3mm (1/8") or…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
This is an Open Source Version of the famous & expensive “Qlocktwo” clock. It works with any ESP8266 and WS2812 LEDs The entire project is meant to be made with a laser cutter. You need the following materials: 4 mm Plywood for the frame,…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
gabarit d'angle pour laser, positionnable facilement grâce a des aimants.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Note: You still have to clean the lens regularly before the laser. There is definitely smoke building up there! Update Feb 2021 V 2.2 better Airflow ------------------------------------------------------------------- Hier habe ich für…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Battery holder for the Laserpecker 2. It can be printed without support (upside down). I increased the wall thickness/perimeter to 4 and print it in draft mode with 0.3mm. Update: There is now another holder for front mounting. It is put…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100mm hose adapter for the suction of the smoke. No support is needed at the pressure and no technical modification is made to the original fan :-) The fan must simply be put through the adapter and reattached to the housing. Then simply…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
This parts are from the founder of LaserPecker and LaserPecker 2, Yu Yu shared it on his Github Page and allowed me to share it here. The Printed Parts halt to support conical parts on the 3rd Axis of the LaserPecker2.
Wydruk około 2,50 €–3,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check your material thickness quickly with this easy mod. gauge is in metric units. Cut from 5mm acrylic or wood Text can be cut or engraved. File is provided in .ai .svg and .pdf format
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Outlet elbow for smoke extraction laser Creality falcon2 Pro, fit on fan. Design for better air flow. Petg, 0.4 or 0.6mm nozzel, layer 0.2-0.32mm, supports
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alignment aid for the laser beam. Model is for the well-known "China Laser". Can be used for 25mm mirrors. Simply insert the assembly into the opening of the laser head and slide in the target, which is included as an SVG file. All prints…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
You need a square nut M3 and an Allen screw M3x6mm
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Are you also fed up with wasting time and material by cutting the wrong thickness of plate? This simple mod has saved me countless times, so therefore I will share my design here. With this mod you can easily measure material thickness on…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Pièce pour extension de l'espace du laser pour la K40
Wydruk około 4,32 €–5,29 € nettoWstępna wycena jednego wariantu
This is a remix with metric bolts, M3/M4. In my remix the disc is 20mm and and a bit thinner. STL model for both M3 and M4 screws (I use M3x30 screws). >> If you like it, please leave a like, rating or a tip... :) Print Settings 0.20mm…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slide on Laserpointer attachment for the Bugasalt V3 the attachment is slightly angled so that the laser is accurate at the optimal shooting distance at about 45cm - 1m this attachment is made for a cheap rechargeable cat toy laserpointer…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Remixed the rugged box by @Whity / @Yanev to fit a Bosch Zamo. The box is smaller than the original packaging and of course more rugged. It has a little compartment for things. Printed in PETG. You will need 6 pieces M3 x 30 screws for…
Wydruk około 6,72 €–8,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Alignment aid for the laser beam. Model is for the well-known "China Laser". Can be used for 25mm mirrors. Simply insert the assembly into the opening of the laser head and slide in the target, which is included as an SVG file. All prints…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
printed with ortur laser master 3 10W Laser For engraving Speed 14000 mm/m Power 50% For cutting Speed 270 mm/m Power 85% Printable doesn't allowing .lbrn2 files so download the text file and change the .txt to .lbrn2
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
The storage box with an openable sliding lid is for the Makita LD030P laser distance meter; it has a lower compartment for the batteries.
Wydruk około 5,09 €–6,22 € nettoWstępna wycena jednego wariantu
Motive for creation 作成の動機 I purchased a laser cutter (Two Trees TS3) with a built-in air filter, but when cutting MDF, smoke leaked from the device within a few minutes of starting operation, and I could smell a pungent, irritating odor…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount to stabilize the galvo-style LaserPecker 1 on a drill press Jacob's chuck. Easier to manage focal distance and avoid bumping the lightweight tripod it ships with. Optional “flex pad” model can be printed in TPU or another material…
Wydruk około 2,12 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter for LaserPecker2 fume extraction, from the outlet fan to a 79mm hose. Print in ASA - 0,20, 15% infill, no supports. link for my 79mm hose : https://www.amazon.it/dp/B08GSTB34K?ref=ppx_yo2ov_dt_b_product_details&th=1
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Supports needed and magnet 2x20x5 mm and glue. Infill 0.15, speed 0.2. Design model on which secound year carpenter student Ondřej Brzák
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Raft, auf dem struckturiertem Federstahlblech geprägt, ist die ideale Oberfläche zum Benetzen mit Geschirrspülmittel, zusätzlichem Speisen einer lang-lebigen dickwandigen Seifenblase während des Blasvorganges und sanfter Entnabelung…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple socket to hold 3mm wooden sheets
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to have a mini laser rangefinder to carry along with my Zeiss Ikon Nettar and I didn't want to use the included mini strap, so I designed it to hold it and use it at the same time to properly focus the camera. My design was based…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is a stand I made for a laser cut easter sign. It's about 6cm 3cm 1.2 cm. It can be used for plywood of 3.5 mm. The plywood I used was about 20cm * 12cm so the weight of the plywood may be an issue.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Ve škole používám při demonstracích optických zobrazení na magnetické tabuli pětipaprskový laserový zdroj (asi Didaktik / NTL??) . Někdy se ale hodí mít jeden, tři, nebo čtyři paprsky. Doposud jsem to řešil elektrikářskou páskou.…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
copertura vetrino laser edile
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Více informací naleznete zde: https://pihrt.com/elektronika/480-laserova-brana-pro-minidron-soutez
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Cílem projektu je rozvinout (posunout) dosavadní znalosti v oblasti modelování, samostatnost při obsluze tiskárny, vytvořit zrcadla pro pochopení fyzikálních jevů a funkčnosti laseru a zrcadel.
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
print four put under laser cutter (if you're keeping yours ontop of your prusa enclosure like we are) job done
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Be one of ten who leave a Like at Printables and support me with it :) The new version 04 allows to use the original holder of the laser module. For the assembly, the extruder must be disassembled by means of 4 screws and additionally 2…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
Hi, The print crimp the honeycomb (see on picture). This system is very stable on a Sculpfun honeycomb. Printed in PETG ----- Salut, le Système pince la doublure du nid d'abeille (voir sur l'image). Ce système est très stable sur un nid…
these are slight adjustments to make them a little stronger and variants to have taller and longer arms.
UPDATE17.01.2022 Found another Template including front, back and top. Its only a PDF so its not simply ready to print or cut out, but I thought I add it as it could be useful to some of you. !!WARNING!! if you plan to do this with a…
A very simple too for aligning your laser head (40mm x 40mm square diode laser modules) to your workpiece. It allows you to quickly establish the origin at the corners of your material without having to test fire your laser. Just butt the…
I got a request for a 308 Blaser ammo box of the new design. The spacing is 50pcs/12,60x75,50mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string if…
I've tried the others but was not satisfied with them so I designed these. Been working great for a couple months now with great holding power.
UPDATE 2024-0214: I added a version for the K1 MAX with the help of @mmeidl78 doing test fits on his K1 MAX; thanks. Stylish side mount spool holder for the K1/K1C/K1 MAX styled after the K1C prerelease photos. Hardware needed: 2x M3 x…
Low Profile Honeycomb Pins for Laser Engravers by RebelTaz I have seen these hold down pins for laser engraver honeycomb beds everywhere, but the problem with all of them is that they stick up too far to be useful with "fixed focus"…
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…
This is a jig to engrave up to 10 pens with your laser. I also add a jpeg to use as background for your laser software.
The lift fits on a DeWalt laser DCE089D1G. The laser beam can reach a height of 32 cm from the ground. The lift itself c
These clip standoffs fit snuggly in the honeycomb tray of my Nova 24/60 Thunder Laser. They lift the material .125" off the tray, the clips hold it securely in place while the support standoffs are for supporting the center span, if…
A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if…
Laser visualizer of sound waves Sound propagates as mechanical waves through air molecules. This device contains a rubber membrane that vibrates in response to sound waves. On the membrane is a small mirror, onto which a laser is…
Laser cut from 3.1mm poplar plywood, the sign and arm in mine are 3d printed though im sure you could do them using the laser cutter as well.
The weak hinge is now fixed uploaded 28 February see picture. I got a request for a .308 ammo box. The spacing is 20pcs/12,6x75,24mm between the insert top and bottom. I made 3 different versions/logo. Let me know if you want another…
Here's my attempt at a laser pistol from Fallout. I scaled it up to 200%. You might want to sand the connection points so they fit if your tolerances aren't perfect. Here’s my assembly and painting video for this…
I used these files to have 3mm plexi cut for the enclosure on my Flashforge Adventurer 5m using the specs provided on the Flashforge DIY Enclosure Wiki page. These are not intended to be printable, but should be used for cutting your own…
There are times when thin materials need to be held down to the laser bed to maintain flatness. A clip is often used to hold down the work. The WeCreat Vision does not use a honeycomb bed but rather uses knife edge slats running front to…
A Collection of Rubber Stamp handles for either 3D Printing or Laser Cutting. The 3D Printed Version was Printed in Black PLA+. You can also print the included Cover/Caps to keep stamp ink from getting all over the place. The Laser Cut…
YOUTUBE video showing the use of this 3d scanning frame: Improved LARGE version of my scanning frame v2 which is working great using RaptorX in parallel laser scanning mode. Motivation for designing this 3d scanning frame: Object can be…
This is my design for a CNC Laser for more information you can visit My-Laser CNC Oficial Page Still in development i'm building two prototypes one for me and one for a client. If i make any changes i post here, but please keep in mind…
Openbuilds 2040 V-Slot The plates are 8 mm thick and are designed for 2040 v-rail. Y-Plates: One of the plates is designed for a Nema 17 stepper motor and the other accommodates a 16 mm f625zz flanged bearing. X-Plates: The back plate is…
This box is designed to be laser cut from 3mm plywood - it is simply glued together, with one side going on last BEFORE the top lid; you can't attach the lid after it is all glued. Dimensions: 116 x 53 x 50 // W x D x H I've included a…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Drag Chain for the Longer Ray5 laser engraver 10W (probably would fit for all the models) You'll need 26 chain links for the X axis and 33 for the Y-axis (Dont know if all units have the same cable lengths). The chain can be printed in…
Hier mal mein Wichtel Set. Alle Dateien sind selbst gezeichnet und sollen auch bitte nur privat genutzt werden. Die Laserteile kann sich jeder selbst skalieren. Ich habe auch svg mit nur 2 Farben genommen, das funktioniert auf MrBeam und…
Credit to IOK / 이성인 https://blog.naver.com/leesi11 Allowed me to post here for others to find. Jig which covers the LaserPecker Stand compatible with the L1 Pro Autostand and LP2 Stand. Print plate upside down to avoid using supports for…
A simple mod for the Slimline PlayStation 2 that protects your discs from getting scratched by the lasers ribbon cable. Support for both laser types! The mod should work on any PS2 Slim model in theory but confirmed to work on 70004 &…
Plaque for the Orbital Laser stratagem UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
This pin fits a standard laser cutter honeycomb table and is tight enough to keep lightly warped thin wood down and accurately cut. Other pins are bulky and too high for high resolution cutting. This pin is version 2. the original one…
A laser cutter hold-down pin. Works very well in PLA, haven't tried other filaments. This should fit most generic “red box” laser cutters and are a better alternative to magnets or wood pins.
Got a request for GAIM VR for Blaser R8. VR Simulator with Oculus 2 and 3. Have 2 friends from work who requested to make their GAIM VR more realistic to use the real rifle for training in GAIM VR. Both of them say they become better in…
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
This is my design of mounting feet and height extender for the Sculpfun S9. I'm not sure, but I think it should work with the S6 (Pro) as well. These are mounting feet including the possibility to increase the printer, depending on how…
This is a wooden replacement bird feeder (dice tower) for the Wingspan board game. The tower and lifts off of and lays inside the dice tray for storage. There are 2 versions, one without the logo (pictured) and one with a more detailed…
Please give it a ❤️ if you like it 🥰 Here is the video about it (FR): Please give it a ❤️ if you like it 🥰
Foldable legs for the Ortur Laser Master 3. Similar dimensions of the set sold by Ortur for $80. These have the option for reusing the original feet as well. Use a 25mm M5 bolt with M5 hex nut for securing legs to bracket. Use 8mm M4 bolt…
2023 NEW.: Added threaded hole at the tips to mount m4 setscrews, to hold rings etc for fiber engravers. Do you own a 80mm chuck-style rotary for your laser-engraver machine? Then you need these special designed jaws for grapping big…
Round components can be lasered with this ratation system. I made this model for a friend, it is based on the " Rotary Axis For Diode Laser " from "ThothLoki". According to his own statement, the model contains some problems, therefore I…
Ortur LM2 Height adjustable feet. Very easy to adjust the height of your ortur laser Screw the base to your table or table Place the feet of the height you need Ready to engraver Patas para ajustar la altura del laser Ortur LM2. Una forma…
function 1.Limit the position of the clamp. 2.be the base of clamp. 3.make the clamp easier to use. print: 4/5 walls 25+% infill
Always make sure you are using high quality eye protection and ventilation while working with lasers. Eye protection is very important! https://github.com/Adamslab/SimpleEngraver This is a 3D printable frame for a simple 2-axis laser…
All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…
Creality Falcon 2 laser cutter Honeycomb with Pegs This jig aligns material with laser movement It also allows placement of subsequent material in the same place for repeated production.
First off, attribution: This is a remix of the laser bed corner inserts by morpha on thingiverse. Found here: https://www.thingiverse.com/thing:4857543 During my testing, I figured out the true 0,0 of the Snapmaker A350 (at least mine) is…
Darthwolf's clips are a great idea, but for me they just loosely sat in the laser bed and didn't really do anything. Instead, I've redesigned it with wedged feet so that it squeezes in between the slots and can hold a piece down. EDIT…
This sled ensures that the lighter is placed properly in the cutting space. I also included a .svg template for you to use when making engraving designs! This item is parametric, meaning you can change how many slots it has, the border…
This is my adjustable focusing stick that I use with my fiber laser. The 3mf files include three parts: 10cm wide top end of stick 15cm long bottom end of stick (short version) 20cm long bottom end of stick (long version) The short…
This is a gCode file that you can use in your Laser Engraver to test the effect of speed vs power. It will produce a Greyscale burn pattern that is 140 mm / 107 mm. You can use this test pattern to get an idea of how your engraver will…
I converted the .stl files with tinkercad and it worked suprisingly well. I had to upload the original .stl files, because you can only publish a printables post with at least one model file.
Ich mag es sehr, verschiedene Techniken zu kombinieren. Durch meinen neuen Laser ist eine weitere dazu gekommen. Da ich auch immer schon dem Modellbau sehr nahe stehe, habe ich mal ein kleines Wohnhaus im Maßstab 1:87 (H0) entworfen.…
"V" the "Visitors" Laser Gun. The laser gun of the iconic television series of the 80s, "V" the "Visitors". Print instructions Category: Props Summary "V" the "Visitors" Laser Gun. The laser gun of the iconic television series of the 80s,…
Designed to work with 3mm (1/8") thick materials. Recommended material: PETG Inspired by Lakeshore3D's P2 clips, available here: https://www.etsy.com/ca/listing/1481624168/slat-clips-and-material-locators-for
Designed to hold the standard 12mm cylindrical laser crosshair module you find on site such as Amazon or AliExpress. Requires that you replace the stock 5mm M3 Flat Head Socket Cap Screw (FHSCS) with an 8mm or 10mm one. The laser is a…
I tried a few other prints like this but wasn't happy with them so I ended up designing my own version. There are 2 lengths. A short and a long depending on the thickness of the material. There's only about 3mm difference in length for…
I made a wooden dowel version, now you don't need screws to make it. Originally published on Atomm . Explore the full project: https://www.atomm.com/template/19311-lasercut-iris-box
You know these laser-cut plants that you buy, shape and glue to your bases and/or dioramas? Well, I was inspired to make a really, really flat plants in Blender, so you can print them flat on an FDM printer, shape and glue. I'm not sure…
Foot for the Creality Laser Falkon so that it stands in the same place, rise by 2.5cm and 5cm, or put them on top of each other for more height
![[REMIX] Rugged box for Bosch Zamo Laser Measue](https://media.printables.com/media/prints/663548/images/5225882_39d18197-5171-412f-9129-d04d28ebab76_f8887cff-ee0e-431b-958d-4d0c448cf769/pxl_20231129_113306422.jpg)
![Zippo Sled/Frame for Laser Engraving [Parametric]](https://media.printables.com/media/prints/37596/images/371404_766640a4-15f9-47ac-a829-ef304d70ca54/61786212252__20a5fd51-6daf-430c-bd81-ff0c759441ea.jpg)
