Liczymy pasujące modele…
The Fraks Flexarm is a tool-balancing arm designed to keep the attached tool parallel throughout its movement. It was created to hold soldering irons to install heat set inserts into 3D printed parts. It has a large working area for its…
Replacement for a Lexar USB Stick case. Cut off the support material after printing the main part of the case. Lexar's USB stick can be open easily by prying it on the side with a knife.
Sluneční clona mechanicky pasuje, ale opticky jsem jí ještě netestoval. Takže používat na vlastní nebezpečí. ;-)
After making the Fraks Flexarm i was looking for a place to make it usable for me. I didn’t want to bolt it down on my desk but had a perfectly usable wall. Print without support, the Fraks can be placed in it the same way as you do with…
Flexaret Film Spool for Flexaret VII, should be compatible with other Flexaret models aswell as other devices. Printed with supports.
Sluneční clona pro starý český fotoaprát Flexaret. Navrženo jako těsné k nasazení, Drží sama na kroužku čočky.
A simple cap to protect Meopta Flexaret VI lens. Drag attach, no threads. An eyelet is provided to tie the cap to the camera with a string. Best print with PETG. No support needed.
Exposure button for Flexaret VI Print Settings Printer Brand: Creality Printer: CR-10S5 Rafts: No Supports: Dont need Infill: 100 Filament: Spectrum Premium PLA black Notes: Use glossy filament, I had only matt available. Post-Printing…
I own a Meopta Flexaret Va camera. This camera takes push on filters. I just have a yellow one and a close up adapters. On my rangefinder camera, I use a Leica Thread Mount Voigtländer Color Skopar 35mm 2.5 lens that takes 39mm filters. I…
I recently purchased a hardware kit from KB3D.com for building the FRAKS Flexarm Heatset Insert Press. In addition to the hardware, several 3D printed parts are needed to complete the build. The designer of this elegant kit,…
Lens cap for a czech film camera - Meopta Flexaret VII.
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
A simple cap to protect Meopta Flexaret III lens. Drag attach, no threads. An eyelet is provided to tie the cap to the camera with a string. Best print with PETG. No support needed.
A simple lens shade for Meopta Flexaret VI cameras. Drag attach. Best print with PETG. No support needed.
A simple lens shade for Meopta Flexaret III cameras. Drag attach. Best print with PETG. No support needed.
If you want/need to restore an ancient Meopta Flexaret VI, you will note that the old synthetic leather liners will need to be changed… If you have a fresh new set, you are lucky… When I restore my old Flexaret VI, I design an entire set…
Was a bit tricky to model due to its odd shape. Printed on a PRUSA Mk3s. It can be printed using minimal supports on critical areas only but i got best results with supports everywhere (SNUG) It requires six nuts (M2 1.68mm thick) to be…
A wall rack for holding Size 1 and Size 2 Tapping heads for Flexarm tapping arms. Also holds a chuck key for a drill chuck. Holds four size 1 and two size 2 heads. Wall mount with #12-#14 screws. Use wall anchors or attach to solid…
A holster for the above hard drive that you can stick to the back of your laptop screen
This is a quick change mount for a Yihua soldering station using their 9071 soldering iron. No magnets or screws, the mount locks on using a mechanical feature. Original Fraks Flexarm project here…
I do not like gridfinity (gasp) and have no need for it on this awesome press arm. I redesigned the tray to just be a tray with smooth bottom edges to help get things out of it.
Updated sizes for M4 hardware to hold down joints when using other 1515 aluminium extrusions, which have about 3mm nominal diameter holes; hence needing to tap up to M4. Updated hardware is as follows: M3*8mm SHCS -> M4*8mm SHCS
I am making a full opengrid wall and wanted to mount a flexarm to that. This HAS to be mounted to a full grid plate rather than a lite one in order to be able to hold up to the forces put on it. Printed in PETG no supports required. 6…
Heatset Inserts Holder for 1515 Extrusion for Fraks Flexarm-Heat insert press, used the cable clamps of the Fraks Flexarm to make a heat inset holder that fits on 1515 extrusion. 0.16 layer height 2 wall loops 3 top/bottom layers 15%…
Magnetic feeder for flexarium or terrarium for chamelon or other repltiles
Utilizes the existing fraks mounts, just extends it slightly and allows the use of a magnetic light from behind. it is modular so can be removed easily. Since it is a functional part use 4 walls, 4 tops and bottoms, 35% infill. I printed…
If you want/need to restore an ancient Meopta Flexaret VI, you will note that the old synthetic leather liners will need to be changed… If you have a fresh new set, you are lucky… When I restore my old Flexaret VI, I design an entire set…
Was a bit tricky to model due to its odd shape. Printed on a PRUSA Mk3s. It can be printed using minimal supports on critical areas only but i got best results with supports everywhere (SNUG) It requires six nuts (M2 1.68mm thick) to be…
I thought it might be interesting to have the same leveling and control behavior of the FRAKS arm combined with a rotary tool, so I made this mounting bracket for the F2 Pro. This operates the same as the other FRAKS mounts for soldering…
I do not like gridfinity (gasp) and have no need for it on this awesome press arm. I redesigned the tray to just be a tray with smooth bottom edges to help get things out of it.
Because I don't use the CompactFlash, and because inserting or removing an SD card—or worse, a microSD card—is annoying, I quickly designed this little holder. Printed with a color change at the height of the pseudo LED prism.
I wanted to create a sleeker look to the Lexar Go SSD & hub combo. The SSD & hub combo simply press fits into the cover. The cover has an opening to allow for cooling and easy extraction. Files are available with and without cold shoe…
Krytka pro FLEXARET VI a FLEXARET VII Filament: Aurapol PET-G graphite black & Filament PM PET-G orange 2018 Resolution: 0.20 mm
