Wyniki wyszukiwania: lino

Aperolino

Aperolino "MK II" // *complete Rework*

01.09.2025: Danke @GBorni von Makerworld für das Erstellen des gif deines fertigen Aperolinos in Aktion! Das zeigt doch sehr gut allen wie simple es dann abläuft! 11.11.2024: Stößelaufnahme mit kleinerem Durchmesser von -0,15mm für das…

Aperolino MK2 // Ventilblock "Aperol" mit Leckage-Ablauf & Doppeldichtung

Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…

Aperolino MK2 // Ventilblock Prosecco für "sehr viele Marken" mit Doppeldichtung & Abfluss

Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…

Aperolino MK2 // Ventilblock "Wasser Glasflasche" mit Leckage-Ablauf & Doppeldichtung

Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…

Aperolino MK2 // Table clamp with M16 screw (Size: S, L)

Update 30.12.: Length of srew optimized to 60mm so it fits on any thickness of tables used with the 2 clamps. Before there was a gap of table-tickness the one screw with the both clamps could not cover. Print settings: Clamp with no 4-5…

Aperolino harder spring

If you like this model, please throw me a like. Harder compression spring for the Aperolino to ensure tightness. I strongly recommend using PETG. Update (24/08/23) Design optimized to increase the compression spring deflection with the…

Duplo/Hubelino compatible marble run cones

This is a set of cones for the http://www.thingiverse.com/thing:159219 marble run system. For the larger ones I add variants that can be printed without extra support. Update 2014-12-19 : Added OpenScad files Update 2025-12-29: Fixed…

El Goblino - DOORS Roblox

¡Oye! El Goblino - DOORS Print this cool and easy figurine of El Goblino, a character from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. This model comes in two parts, head and body. Both can be printed without supports…

Duplo and Hubelino compatible marble run parts

There are already a couple of good models for LEGO duplo compatible marble run parts. Most of them didn't work for me so I designed my own. The marble cut out is the same as for the Hubelino parts (commercial marble run parts) so they can…

Helinox Chair Feet

I have designed these for easy to click on and off, moreover it makes it easier to clean after use. All feet is stored separately and can easily fit into the Helinox chair zero storage bag together with the chair. It is also possible to…

Spoolino - AMS Adapter for Small 200g/250g Spools

I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … For (nearly?) all 200/250g spools Only two parts…

Pug Carlino

My Pug

Helix - Lego Duplo / Hubelino compatible

Great additional Helix compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose the Helix left & right direction. Did some optimization for better printing, like connected stud holes, thicker…

Lego Duplo and Hubelino compatible Marble Run "Finish" Bowl

Simple remix of the wonderful "marble run cone - very small" by @wuz23 and remixed @c_schmitz. I use this as the piece at the very end of the marble run track to collect the marbles. Enjoy and post your makes! If you found my Things…

The Drop - Lego Duplo / Hubelino compatible

Great additional Drop compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can build tracks from 4 sites to the drop. It speeds up and goes in one direction. Did some optimization for better printing,…

Tunnel - Lego Duplo / Hubelino compatible

Great additional Tunnel Set compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 2x2, 3x2 and 4x2 length. Did some optimization for better printing, like connected stud holes, thicker walls…

Goblinoid Tooth Fairy

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

BALL FEET FOR HELINOX CHAIRS

The feet on my Helinox chairs had perished, and rather than replace them with standard skinny versions and adding a ball foot adapter, I made these replacements to enjoy the best of both worlds. The Helinox ball foot adapter accessory is…

Smooth Slope - Lego Duplo / Hubelino compatible

Great additional 3x2 Slope compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The 3x2 slope is a good addition to the 2x2 and 4x2 slope from Hubelino. Did some optimization for better printing, like…

Duplo Hubelino marble Run Ball

A Ball that fits the Duplo Huboline marble Run.

Straight - Lego Duplo / Hubelino compatible

Great additional Straight in two different sizes compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 3x2 and 5x2 length. Did some optimization for better printing, like connected stud holes,…

Y Track - Lego Duplo / Hubelino compatible

Great additional Y-Track compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. Did some optimization for better printing, like connected stud holes, thicker walls and after much test-prints i managed to get…

Quick Turn - Lego Duplo / Hubelino compatible

Quick Turn is a fast curve, compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. Did some optimization for better printing, like connected stud holes, thicker walls and after much test-prints i managed to…

Aperolino Ventilblock PET Wasserflasche mit Gewinde und stirnseitiger Dichtung

Ventilblock von Luisengineering abgewandelt mit einem Schraubverschluss um die leere Flasche mitsamt den Ventilblock aus dem Halter ziehen zu können. Als Dichtung kann de r Dichtring 20x3,1 vom Set benutzt werden, dieser dichtet einfach…

Short Curve - Lego Duplo / Hubelino compatible

Great additional smooth short curve compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose left & right direction. Did some optimization for better printing, like connected stud holes, thicker…

Doublecurve - Lego Duplo / Hubelino compatible

Great additional Doublecurve set compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. You can choose 3x3 and4x4, each left and right direction Did some optimization for better printing, like connected stud…

Jump / Wobble - Lego Duplo / Hubelino compatible

Additional Jump compatible to Hubelino® a Marble run for Lego® Duplo®. Its for marbles around Ø25mm. The balls do a little jump. Very funny you put some of them in a row to let the balls wobble. Did some optimization for better printing,…

Marble Ball for Lego / Duplo / Hubelino Track

I created this simple replacement ball for the Lego/Duplo/Hubelino marble run toy systems. The ball dimensions should be nearly identical, and you can vary the weight of the ball by including more or less infill, changing how fast the…

Chicago Illinois 3D Miniature

3d miniature of Chicago, Illinois! Check out my collection of other miniature cities: https://www.printables.com/@jarvizar/collections/1124416 I also have an updated Multi-Color version of this model (and many other exclusive miniatures)…

Wrigley Field - Ballpark in Chicago, Illinois, USA

⚾ Welcome to Chicago! 🐻 This multi-part assembly can be printed easily in colors even without MMU/AMS, although with it you can achieve even more realism and details. See the assembly instructions further below. Wrigley Field is a…

Stößelaufnahme Set (tight, normal, loose) {for Aperolino MKII}

Ein Set von verschiedenen Passungen der Stößelaufnahmen für den Ventilblock. Mein Problem: Bei mir ist es vorgekommen, dass mit Schwankungen beim Druck der Ventilblöcken manche Stößelaufnahmen-Dichteinsätze bei PETG von Firma XY gut,…

Helinox Chair Zero feet

PETG or ABS/ASA for weather protection some strength profile with more walls (6) print upsidedown without support better to use brim

Tolino Shine 1st generation front cover

After my quite old ebook reader fell down it immediately broke. The material of the front cover was that much brittle, that it even broke into thousands of tiny pieces when I tried to remove it. Even tough the device is now out of…

Intelino - rails

Intelino - rails

Illinois, USA (IL) Topographic Map with Rivers

Illinois, USA (IL) Topographic Relief Map with Rivers and Coastal Waters Illinois, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…

Hubelino-Kugellift | Hubelino marble elevator

Hubelino ist eine großartige Duplo-kompartible Murmelbahn. Dieses Ding ist ein Lift für Hubelino-Murmeln. Der Antrieb erfolgt mechanisch und universell über einen Ixolino-Akkuschrauber, wie er eigentlich in keinem Kinderhaushalt fehlen…

German Shepherd / Malinois Mandala Art (Stained Glass Style)

This model features a highly detailed 2D silhouette of a German Shepherd in an intricate mandala style, perfect for 3D printing enthusiasts who appreciate elegant and complex designs. It also appeals to fans of similar breeds, such as the…

Aperolino Flaschenhalter 219mm

About a like and the posting of a make I am happy! Happy printing :)

Duplo / Hubelino compatible pillar (4x4, 8 high)

A DUPLO compatible pillar 8 bricks high and 4x4 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…

Ferrari's Horse - Cavallino Rampante

A new 3D figurine generated by AI, the famous Ferrari's Horse. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Duplo Hubelino Marble run sphere 24mm

Print two hulls with the flat side down. Print one core with the side face down. On this image I marked the down face in blue. This way, the layerlines of the plug are 90 degrees to the layerlines of the hulls, providing maximum strength.…

Doorstrap filler for Ami/Rocks-E/Topolino

Not my model, just re-uploading here for everyone to enjoy and to make a complete collection on here . A small gap filler that goes around the door pull straps of an Ami/Rocks-E. Should help to keep the cold/breeze out, since the doors…

Výtah kuličko dráhy Lego duplo / Lego duplo and Hubelino marble lift (elevator)

Výškově variabilní šnekový dopravník na kuličky k dráze kompatibilní s Lego Duplo. Výšku lze upravovat vkládáním nebo odebíráním mezikusů. Kostky jsou rozměrově kompatibilní s kostkami Lego duplo. Základnová šneková hřídel je se základnou…

Helinox Chair Cup Holder

Fits: Chair One, Chair Two, Chair One XL, Sunset Chair, Beach Chair, Savanna Chair, Playa Chair, Chair One Mini, Chair Zero, Chair Zero L, and Chair Zero High-Back. Supports: Yes (everywhere) Infill: 30% The way this is uploaded, it will…

Aperolino Soda Stream Bottle Adapter

Out of a comment under the Aperolino, i decided to change the design to an soda stream 0,6l glas bottle. O-Ring: 24mm https://amzn.to/3QMhSzg https://www.youtube.com/watch?v=p2EYFeVhTlQ&t=7s Made by luisengineering1

Hubelino Elevator

I saw the need for an elevator for my Kid's Hubelino marble system more than they did, but they liked it a lot in the end nontheless.. I had a cheap 12V geared motor with (CM-370-1260 w/ 10 RPM) still laying around from another project…

Ventilation System for Camping Toilets (Trelino ,Trocken Trenntoilette, TTT, SOG, ...)

At the end of 2022, our Thetford cassette toilet, which Pössl had installed in our van, has been replaced by an "Evo L" dry separation toilet (TTT) from Trellino... The aim here is to offer a modular system with which the challenges to…

Ami/Rocks-E/Topolino Doorpull handle/grip

A small 3.6cm (approx 1.5inch) ball to attach to the doorpull straps of a Citroën Ami or Opel Rocks-E (or the upcoming Fiat Topolino?). Sick of having to need a firm grip on the door strap? Door flies open at the slightest gust of wind?…

Clinometer

Explore trigonometry applications with a project based learning (PBL) approach in the classroom with this durable, support-free, clinometer. I have used this design in my classroom after the frustrations of trying to build these devices…

Placa 2D de perros - Husky - Great Pyrenees - Belgian Malinois

Si tienes una mascota de esta raza y te gustan las bicicletas o simplemente amas a tu perro, esta placa te encantará para llevarla contigo en tu bicicleta o en tu llavero cada día. Al generar el slicer, recuerda configurarlo para hacer…

Duplo / Hubelino compatible pillar (2x2, 8 high)

A DUPLO compatible pillar 8 bricks high and 2x2 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…

Plinth Clip for kitchen legs - Universal Kitchen Clog Hook Clip - Gancio per zoccolino cucina

Universal Clip / Hook for Kitchen Clog - Hook Clip for Plastic Clog Feet and Aluminium Clog - Clip for kitchen base - Plinth Clip for kitchen legs - Gancio per zoccolino cucina - Molletta tamponamento cucina Resize/Scale to adjust…

Duplo / Hubelino compatible pillar (2x2, 4 high)

A DUPLO compatible pillar 4 bricks high and 2x2 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Prints without supports.

Malinois wall decor

Malinois Imprimé avec une Ender 3 en 0.4mm (11g pla, 1h15)

Spiegelhalter | Mirrorholder Opel Rocks E Fiat Topolino Citroen Ami

Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…

Geometric dog wall art - “Malinois style”

Geometric dog wall art - “Malinois style”: Default size is around 150cmx120cm 77 pcs (all parts can be print at full size on a standard printer bed) All parts are numbered on the back and here you can find the numbers assignment :…

Melinoe Cosplay Accessories - Hades II - FDM

All the cosplay bits and bobs needed for Melinoe. I'm so excited to debut this new costume! The only back references currently available (January 2023) is magnified screenshots of Melinoe from trailer gameplay. I had to guesstimate…

Simple Universal Phone Holder for Ami/Rocks-E/Topolino

I couldn't find a universal phone hoider for the Ami/Rocks-E/Topolino, so I created something I took an iPhone holder and stripped it down, then added on a universal phone clamp from another project. Now we have a universal phone holder…

Improved Aperolino block and valve

Needs

Aperolino tube adapter 6mm to 4mm

If you like this model, please throw me a like. Adapter for the Aperolino to use a PTFE 4mm tube, which is common in 3D printing, instead of an 6mm tube. PTFE is usually food safe, but I can't guarantee anything. Use at your own risk!…

SCATOLINO PER ODONTOTECNICA (2.0)

Scatolino per messa in articolatore di modelli in gesso Utilizzare solo il TPU per la stampa. Se volete utilizzarlo è buona cosa passarci sopra la vasellina per una rimozione sicura del gesso. Baseformer for placing in articulator plaster…

Hubelino Marble Track (Length 3)

A piece of marble track for Hubelino with length three for more flexibility in your track design. — Printing tips: Use a brim to improve bed adhesion. If the piece fits too loosely or doesn't fit at all, try to adjust the horizontal…

Chicago Cityscape 3D Model – Windy City Skyline – Illinois Architecture & Lake Michigan

If you want another U.S. city, international landmark, or custom project – just send me a message and I'm ready to get to work! Discover the bold architecture and vibrant energy of the Windy City with this detailed 3D model of the Chicago…

Rueda de Molino

Rueda para molino

Inclinometer

I modeled this to use on a welding table that I'm building. The table will have two fully tiltable sections, so this little gizmo should be able to tell me if the table sections are level and, if not, what angle they are tilted at. The…

Clinometer - trigonometry is fun now

In this post, we’ll explore how to create your own 3D printable clinometer and discuss its practical applications. The focus of the target group This is a trigonometry project, anyone interested in math, angles and trigonometry can use…

LEGO Duplo and Hubelino compatible hole down

LEGO Duplo and Hubelino compatible hole down. I used tree supports which worked great for separating. Don't forget to use supports in the circle area.

Aperolino Rueckstellfeder

Die Feder Stellt die Mischrinne zurück, um Nachlaufen aus Rinne zu verhindern.

REMIX Aperolino "MK II" Gehäusebeine

Remix der Gehäusebeine, damit man diese direkt auf ein Holzbrett schrauben kann. Ich hab die STEP Datei hochgeladen, dann kann jeder das für sich noch anpassen bei Bedarf. Das Modell ist die rechte Version. Für linke Version einmal…

Registration Jig for Linocut Printing (2 Types)

Registration Jig for Linocut Printing 2 Types -Flat jig w/ grip nubs on bottom -Stepped jig sans grip nubs

Multi-Function Level and Inclinometer Tool

Introducing the Multi-Function Level and Inclinometer Tool, a versatile instrument designed for leveling, angle measurement, and incline tracking. Compact and portable at 3” squared this tool provides all the functions of a larger level…

Turning knob remix for Hubelino Elevator

This remix of the Hubelino Elevator offers users several options for upgrading and customizing the original model: Rotary Knob : A newly designed rotary knob has been created to replace the motor in the original model. This allows for…

Supporto da parete per spazzolino elettrico Oral-B presa IT

ITA Remix del modello “Minimalist Oral-B Braun Electric Toothbrush Wall Mount” di András Bognár ATTENZIONE: Alcuni utenti hanno segnalato che l'ingresso per la presa risulta essere leggermente più largo del dovuto, e l'aggancio potrebbe…

Duplo / Hubelino compatible pillar (3x3, 8 high)

A DUPLO compatible pillar 8 bricks high and 3x3 wide. Visual appearance inspired by a “Ground support” or “Truss tower” from Event / PA technology. Pillars come in handy to easily achieve certain heights. Especially when building a DUPLO…

gap gauge (szczelinomierz) 2-9mm

Hi, I hope you will find this project useful, it is a basic feeler gauge that I will use on escalators

Leifheit Linomatic rotary dryer ground socket cover

Replacement cover for the ground socket of a Leifheit Linomatic rotary dryer. Should fit all Leifheit plastic ground sockets for 50 mm dryer poles. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…

University of Illinois Key Chain

Show your Illini pride with this two color print of the University of Illinois key chain

SCATOLINO PER ORTODONZIA

scatolino per modelli ortodontici Se vi serve più grande basta cambiare la dimensione in Cura oppure utilizzando Meshmixer raffrontandolo con una scansione dentale. Tuttavia il file è dimensionalmente corretto If you need it larger just…

cone_mid_flat_inlet Remix of Duplo/Hubelino compatible marble run cones

This is a Remix of: More detailed of the part named cone_mid_flat_inlet It was mentioned in the comments of the remixed file that the stubs come lose and are already separate in the model. That is correct and fixed in the attached files.

University of Illinois Illini Drink Coaster

Display your University of Illinois Orange and Blue spirit with a two-color coaster for your beverage of choice! Print Details Material: PLA Layer Height: 0.20 mm Infill: 15% Supports: None Brim: None Color change at 3.6 mm → Layer 18 for…

Baren for linocut printmaking

120 mm diameter Made using the Prusa MK3S+ layer height: 0.24mm Infill: 15% Support only on bed Joined together using a 5mm threaded insert and screw

Grinder Nozzle Melitta Molino Mod

Grinder Nozzle Melitta Molino Mod A little upgrade for the Melitta Molino Coffee Grinder. I had the problem that the coffee powder for my espresso spilled out of the "nozzle" so I build a better one. Just simply print it and push it…

Personaje masculino GTA5 / Male character GTA5

Personaje masculino del juego GTA 5 campesino de 10 cm de alto. Male character from the game GTA 5, peasant, 10 cm tall

Belgian malinois Double-sided foto

Double-sided photo of Belgian Malinois Shepherd. layer height 0.16mm in layer 4 color change

Intelino Rails - koleje

Intelino koleje. Dlouhá jako originál ⅓ koleje jako originál Zahnutá kolej, co se dá použít na obě strany díky použití spojek Spojky na koleje - doporučuji vyzkoušet dle vaší tiskárny tisk +- pár procent velikosti. Model na tisk barevného…

Topolino e Minnie xmas time

Ho creato il modello di topolino e minnie in versione natalizia

Duplo/Hubelino marble run end

Standard path-finishing brick for Duplo marble run.

Malinois (Belgian shepherd) dog wall art

Malinois Belgian Shepherd wall decor with three mounting points for double‑sided tape. Print as is, or scale in X and Y to fit your printer.

Mickey Cookie Cutter and Minnie Cookie Cutter Topolino

🎀 Bring magic to your kitchen with Mickey topolino and Minnie cookie cutters! 🐭

Essdee Lino Cutter - compatible handle

printing 0,16mm layer height no supports use brims to maximize bed adhesion strength: I used a modifier to set a 60 strength on the upper part to strengthen the thread area

Hubelino/Duplo Bricks

I designed a few special building blocks for the marble run with Hublino or Lego: A drop section measuring 2x2 A drop section measuring 2x4. Here, the track runs diagonally through the brick A drop section measuring 2x6. Two tracks can…

Helinox Chair Replacment Foot

Replacment foot for helinox camping chair Print Settings Printer: Flash Forge Creator Pro Rafts: No Supports: No Resolution: .1 mm Infill: 100% Post-Printing Take a 1/2 in drill bit, i used an endmill in a drill,down the middle to clean…

Belgian MALINOIS cookie cutter

Nothing special, just cookie cutter

Footrest Ami/Rocks-E/Topolino (3 versions, no AMS/MMU)

A nice footrest with a grippy pattern for your Rocks-E, Topolino or Ami. Three versions available. Just a grippy pattern and versions with Opel or Citroën logo. Printing instructions: These should be really easy to print, no need for any…

Helinox end cap with rope clamp for rubber rope for 17,4mm poles (Chair One XL, Swivel Chair, Sunset Chair, Savanna Chair, Bench One)

If, like me, you are a little clumsy and, for whatever reason, pull too hard on the chair leg and end up breaking the plastic part, you will find a replacement part here to reassemble and use the chair. Fits the Helinox chairs with the…

Personaje Masculino (vendedor) GTA5 / Male Salesman Figurine GTA5

Estatuilla de personaje masculino de 10 cm de altura personaje de gta 10cm tall male GTA character figurine

Perdonaje masculino gta5 Male character gta5

Estatua de 10 cm de altura 10 cm tall statue

ČD class 680 "Pendolino"

I hope you will like this model! :) Layer height: 0.15 mm Supports: Yes

Taper / adaptor for Duplo / Hubelino compatible pillars

These three adaptors allow the combination of my DUPLO compatible pillars of different widths. The visual appearance is inspired by a “Ground support” or “Truss tower” from Event / PA technology. The pillars can be found here - 2x2…