1 / 4
Footrest Ami/Rocks-E/Topolino (3 versions, no AMS/MMU) — zdjęcie 1
1 / 4

Footrest Ami/Rocks-E/Topolino (3 versions, no AMS/MMU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A footrest for the Opel Rocks-E, Citroen Ami and Fiat Topolino, 3 versions, no AMS/MMU

Ocena
0 / 5
Polubienia
7
Pobrania
85
Wydruki
0
Wyświetlenia
438
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A nice footrest with a grippy pattern for your Rocks-E, Topolino or Ami.

Three versions available. Just a grippy pattern and versions with Opel or Citroën logo.

Printing instructions:

These should be really easy to print, no need for any supports. Just print them backside down as they are oriented in the STL's.
The grippy pattern (and logos) is about 1mm high, so advise to use 0.2mm layer height or less for good enough detail.

For material I'd choose PETG because it's more UV resistant and tougher than PLA, which makes it a good choice for this application

Mounting instructions:

Can be mounted with some doublesided tape. Get some strong stuff with a bit thick backing.
Clean the area where you mount it and then wipe down with some isopropyl alcohol to make your tape adhere as good as possible.

Multi-color:

Many people will ask how to do the dual color (as pictured) without an AMS/MMU.
Most (if not all) slicers have a way to insert a filament switch into the print. I'm using Cura 5.x, so here's the instructions on how to do it in Cura.

  • Slice your print as you would do normally.
  • Go to the preview and use the slider on the right side to find the first layer that shows printing the grippy/logo but not the panel. Remember this layer number.
  • Click the “Extensions” menu (top bar), select “Post Processing” and click “Modify Gcode”.
  • A popup will show, click the “Add Script” button on the top left and choose “Filament Change”.
  • On the right side of the popup, a list of parameters for the filament change is now shown. Put the layer number in the “Layer” field. Then click “Close” on the bottom right.
  • Now, slice the model again. Note the button with “</>”  and a red dot. This indicates your chosen script (the filament change) will be incorporated into the print.
  • Now start printing. It'll pause at the chosen layer and request you change the filament, then press a button to continue. It'll purge the old color and resume printing in the new color.

 

Licensing:

I provide these STL's free for personal use. If you would like to sell prints based off my models (or just support me), please buy the models from my Cults3D account.

Link to these models on Cults3D: https://cults3d.com/en/3d-model/gadget/footrest-ami-rocks-e-3-versions-no-ams-mmu

Tagi