Liczymy pasujące modele…
Prints better when it's right side up with a little support on those bridging areas (the details should be fine when left alone). Standard printing setups, tree support works well with it. Works for 100%, but looks better on 200%
2025/4/21 fixed forearm length, updated all related file The cover photo was printed on 150% with a 0.6 nozzle Goes together about the same as the original, the only major difference is that I changed the shin frame and removed feet. See…
Updated 5/5/23 - Added rear hole to allow use in Shellstrike. Main dart diameter changed from 9/16" to 17/32" to more accurately mimic real life shell. Fillets also cleaned up to look nicer. Works just like the one that came in the box.…
This is a simple yet useful pet bottle filament maker, follow instructions on YouTube, its in Portuguese but you can enable subtitles and follow just by watching carefully. Filament Tractor Playlist Tutorial:…
very simple model, i used the official low poly game model as a reference. Use in conjunction with Longmarch9's armor set- https://www.printables.com/model/1116352-dummy-13-signalis-lstr-512-set-beta/files
/////Updates///// 11.02.2022 Updated hardware needed. All the hardware can be bought at a hardware store for very cheap. For the bearings, I recommend you order on Ali Express. They are cheeeeeep. https://s.click.aliexpress.com/e/_AfxdON…
This project is one of the ten finalists of Hackaday's challenge reuse recycle revamp : https://hackaday.com/2022/06/28/2022-hackaday-prize-reuse-recycle-revamp-finalists/ full details are given here :…
Inspired by Chaoscoretech's model, I remixed Colt Express Diamond Tokens by GamesBros to remove the letters and clean up the faces of the diamond. I printed them separately in clear PETG and glued them in the hands of the empty handed…
I tried so many downloaded roku remote battery covers, there must be many versions. Printed it in PETG at 0.2mm, the "I made this" on the back might be nicer with a smaller nozzle and/or lower layers, but this was my second revision and I…
Spielende Personen / Playing People als 1:10 Verkehrsschild. Die Rohre einfach auf der Rückseite aufkleben! Druckeinstellungen: Düse 0.4 Schichthöhe 0.1 Material: PLA schwarz blau weiß Farbwechsel bei: 0.6mm 2.1mm viel Spaß dabei!!! Edit…
Processed in blender. Uses MHR in game models.
The goal of this project was to create a machine that can recycle PET bottles into filament! Build Tutorial: Tips and Tricks: Parts List 1.75mm Drill Bit: https://amzn.to/3QP1AUL Silicone Glue: https://amzn.to/3G7ZPNL Heater Block and…
Eve Online's Minmatar Maelstrom! One of my favorite ships. Made it 16-inches long and sliced it so its easy support-less printing. Also added 'keys' everywhere to help connect the pieces together before gluing. Print Settings Printer…
This shell allows you to fire 2 shots of 3 short darts from Nerf Shellstrike without reloading between. This concept is the same as the 16-shot in-line hammershot cylinder by hitchhiker4200 . The front dart creates a seal with the barrel…
I always upholster the seats of my BoomRacing BRX02 88 & 109, and that's why I finally made templates to easily cutout your fabric and leather. Steps are simple: Print the templates place them on the fabric / leather you'd like You'll…
Hello 3D-friends :) I designed a simple vortex machine here. You can adjust the whirlpool strength with the controller. The lighting can be controlled individually. This can be controlled via push button, remote control or smartphone app.…
Zajištění vnitřního polstrování korbičky proti sesouvání
Printed in Sunlu Matte PLA for the most part, only the red is some leftover other brand of PLA. Its quite hefty: 13h print time @0.2 layer height with a 0.4mm nozzle, 3 walls, 4 layers top and bottom, 12% cross hatch infill. 420g filament…
Iconic Movie Villains - Wallstreet - Gordon Gecko - 1987
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
PC Fan Grill with Maelstrom Logo – Cyberpunk 2077 “Chaos is our language” – give your PC a dark, industrial vibe! This is a unique fan grill model inspired by the Maelstrom gang from Cyberpunk 2077. Perfect for fans of dystopian…
Etwas kleiner im Innendurchmesser, angepasst weil ich es so brauchte 53mm Außendurchmesser anstatt 55mm angegeben weil sie so besser in die Keramiken passt
🎁 Join my Patreon for exclusive models, sneakpeeks, votes for my next design, and a commercial license to sell prints of my model kits! Kit Crafters' Patreon 💎 This is the Iron Maelstrom ! It's a jet loaded naval unit with a swivelling…
Basically I needed the original spool to hold the equivalent of more than one bottle, the solution I came up with was to lengthen the spool body. But I elevated this idea so that it could be an "extended" or "infinite" spool body by…
Covers for the air release holes in the Trilogy/ShellStrike Shells. Does the minor loss of air make a difference? Who knows? In any case they make the shells look nice. Category: Toy & Game Accessories
This is the Rare weapon, PKR Maelstrom, from the game The Cycle: Frontier. The Cycle: Frontier is a PvPvE first person shooter made by Yager Development. They had unfortunately announced that they will be shutting down the game as of…
Discover a functionally designed 3D model specifically crafted to securely hold Telstra Gen 3 Smart Modems. It boasts a small lip that ensures your modem stays in place firmly despite the weight of hanging cables. Creating this model…
I have often thought a fully automated version of RoboRally would be incredible. This is my first step on that path. I have converted the six boards from the 1995 version of the game into a static board. This is broken into four 6"x6"…
Spring Spacer for the Nerf ShellStrike DS-6 Blaster prints in two halves so you can install them into the plunger head without removing the plunger rod. (see photo, yellow spacer) In theory, there is still more room for spring…
A simple decorative piece design for the MasterLiquid ATMOS, inspired by Maelströms.
With this mount you can mount the Showtec Pixelstrip 40 LED Bar on a microphone stand. The diameter of the stand was 15mm. For mounting the original screws are used. You should print it with many perimeters to improve the stability. I…
Hello, this is a replacement for the middle connectors of a rolltop campingtable. The Model is split in two parts so it can be printed without supports and the layer alignment is better for strengh. It fits perfectly in my table so I hope…
Oclean elite ulstrasonic tooth brush tray Stand for tooth brush + two spare end tips Simple design and print Main hole - fi 27mm Spare holes - 2 x fi 15 Height - 40mm No supports, infil 5-15% If You are glad with my work You can buy me…
The object should be printed at 0.2 layer height. There will be a small plug in each hole which facilitates the printing but must be poked through to open up for the string.
Hält alles schön kompakt zusammen und die Funktionalität von 2x 360 Radiatoren klappt dann problemblos. Habe das Endstück noch um ein Teil eingekürzt da sonst die Kabel zum Netzteil hinunter so auf Spannung waren. Benötigt werden: 4x…
This is a model of the original hard drive mounting bracket inside a PowerBook G3 (Wallstreet & PDQ, c. 1998). I modeled this to make a variation (to mount and SSD and some other pieces in the existing bay). The original has a slightly…
A remix of HunterGreen's "Dualstrusion Catan Numbered Tokens" (which is also apparently a remix of a model by tvputten). Numbers are embedded in the chit and flush with chit face. Additionally, a marker is included on the rear of the chit…
Customized version of http://www.thingiverse.com/thing:95636 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=95636 Instructions Using the following options: text_size = 5 text_line_1_side2 = By: Tim…
Wenn sie ein Bontech DDX setup nutzen, legen sie mithilfe dieser Brücke die Kabel vorne herum. Sie können den Strang mit Kabelbinder fixieren. Z höhe bleib erhalten.
Description: A stylized 3D model of the popular internet personality and meme character, Mellstroy (Andrey Burim). Creat
It was in the dark ages of Filament hording and filament overflow. Merchants of Filaments throw masses of filament at him. Roll after roll kept piling up at his cave. But our Joel was still unsavvy and now sinking in the one material…
Telstra TV (Roku 4200TL) TV Hanger This simple mount allowed me to put my Telstra TV 1 below my Kogan TV mount. The arm piece is likely not ideal for many but worked well enough that I didn’t need to keep iterating just a little holder…
These are replacement lenses for the awesome Adafruit NeoPixel Goggles ( https://www.adafruit.com/products/2221 ). The lenses include a dualstrusion "camera iris" style design. I printed these in black ABS designs over clear PLA lenses.…
Special thanks to my model, Blizzard the Hillstream. Also it is the near the exact dimensions of a Gastromyzon hillstream loach, so it has come it is pretty helpful if you're weird like me and you like to measure your fish.
A water proof box to keep safe a Telstra Hotspot and cables. There is a spacer that is an extra piece that needs to be glued in. It prevents the power button from being pressed. The cable compartment cover has captured magnets 3mmx1.5mm.…
Das Teil ist sehr klein, ich emphehle daher mit „Rand“ zu slicen.
This is a dual extruder version of Photon_Adam's 3D Scan - Action Log from BLAMMO! . I pulled the model into MeshMixer and extracted the beard from the original model. I cleaned up what I think were scanning errors on the top of the log,…
Description This striking, rectangular bookmark features a dramatic, high-contrast illustration of a supermassive black hole with its distinct, swirling accretion disk dominating the center. Above the black hole, a spiral galaxy is…
Dieser Adapter orientiert sich am Rücklichtadapters eines namhaften Herstellers. Das Original bietet zum Einen nur die Montagebreite für Rücklichter mit 50 mm und zum Anderen ist es durch die dünne Materialstärke häufig sehr wackelig am…
2 mal 27mmx2,5mm Zylinderkopfschraube plus Einschmelzmutter
Hält alles schön kompakt zusammen und die Funktionalität von 2x 360 Radiatoren klappt dann problemblos. Habe das Endstück noch um ein Teil eingekürzt da sonst die Kabel zum Netzteil hinunter so auf Spannung waren. Benötigt werden: 4x…
Customized version of http://www.thingiverse.com/thing:95636 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=95636 Instructions Using the following options: text_size = 5 text_line_1_side2 = By: Tim…
Discover a functionally designed 3D model specifically crafted to securely hold Telstra Gen 3 Smart Modems. It boasts a small lip that ensures your modem stays in place firmly despite the weight of hanging cables. Creating this model…
Placing the Feelstrokers™ from Kiiroo with there cap downwards takes up quite some space. I therefore designed this little clip that lets you attach them upside down so the overall space needed is slightly smaller. Sure they can stand…
