Liczymy pasujące modele…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
Hello Everyone This is my second project for the Xiaomi temperature and humidity sensor. The first design is to change the color of the sensor housing for use in the Bambu Lab AMS System or the second version to change the color of the…
I purchased a bunch of Xiaomi LYWSD03MMC temperature and humidity sensors for use around the house. They are cheap and work very well. I re-flashed mine with some open firmware and have been using them very successfully with Home…
A resetter for the mijia thermometer after convert from bluetooth to zigbee With this tool you can easily resett the device and bring in to pairing more Just use a little piece of wire
I recently picked up the ESP32 based OpenTherm Smart Thermostat kit from DIYLess ( https://diyless.com/product/opentherm-thermostat ) as a cheaper alternative to a brand name smart thermostat. It came with a Xiaomi Mijia Bluetooth…
Xiaomi Mi Temperatur Sensor LYWSD03MMC-z Batterie Mod von CR2032 auf CR123A und Magnet-Halter (Optional) Ich habe den Mi-Sensor von Bluetooth auf Zigbee geflasht um das Teil problemlos in mein Smarthome zu Integrieren. Da nach dem Flashen…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
Here's a little holder for a Xiaomi LYWSD03MMC to fit inside your Filament Dry Box. I use these sensors with ESPHome using the PVVX firmware and Home Assistant to monitor the humidity of my Dry Boxes.…
Minimum-size radiation shield for the Xiaomi LYWSD03MMC temperature and humidity sensor. Two parts snap together.
It has an extra 0.3 mm on the top of the placement to correct the heigh deviation produced by the support contact. I printed it with an 0.2 mm Z distance on the supports. I designed it with F3D and did it to add a temperature and humidity…
Use case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. I added different models in order to fix it or place it in a…
AAA and wall mount for the fantastic LYWSD03MMC
This is a simple wall mount for the Xiaomi Mijia temperature / humidity sensor (LYWSD03MMC). Designed to attach to wall using a Command Poster strip (size small). NB: This is not a remix (designed in full by myself), but more “influenced…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone I love the LYWSD03MMC temperature and humidity sensors from Xiaomi because they have a compact size, a…
Simple adapter for Xiaomi LYWSD03MMC to use with Niko coverplates. Print settings Layers and perimeters Vertical shells > Perimeters: [1] Quality > Detect thin walls [x] OR Advanced > Perimeter generator [Arachne] Infill Advanced >…
Printed with PLA and PETG - 50% infill, both work perfect. Best use organic supports only on table.
I was a big fan of 3D printing in general ever since I saw the first early RepRap era printer review, and last week I finally purchased one! So this is my first 3D model, in which I've put all these years of passive 3D printing…
Materials https://www.printables.com/model/201564-xiaomi-lywsd03mmc-stevenson-screen Since outside, recommend printing in ASA using a light color such as gray Two medium command strips (outdoor, clear) Can purchase a refill pack that…
A small holder / rain shield for the Xiaomi family of temperature and humidity monitors. For outdoor deployments
Holder mount for the XIAOMI BLE sensor display downward onto some wooden surface. It makes sense if you want to get climate-data from a surface, e.g. incase of mould-risc. The recommended mounting screw is a metric selftapping woodscrew…
I created this shell to enclose the Xiaomi Miijia LYWSD03MMC on my balcony, in a place not directly exposed to sun, rain or moisture. It is not waterproof, of course, but it does the job. The model is made of two pieces clamped together…
Need 2 self-screws 2.9x13 or two hot-melt nuts M2 and two screws M2, for a better look use the handle as in the photo from here <3
Infinitely adjustable Reversible for an even wider range of adjustments Fast print No supports needed Onshape model
A compact outdoor enclosure for the popular Xiaomi Mijia Thermometer 2 BLE temperature and humidity sensor. I designed this specifically for Home Assistant/BTHome users who want reliable outdoor readings without exposing the sensor…
This is a simple holder for a XIAOMI Digital Temperature/Humidity Sensor (LYWSD03MMC) . I attach the holder to the wall with a small command strip . I use several of these sensors with ATC MiThermometer custom firmware and collect data in…
se case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. Impression I recommend printing it vertically in PLA or PETG. Please…
Found this nice little holder for the nifty Xiaomi temperature sensor / display. And in an attempt to organize my always cluttered desk, I've added a hexagonal fixture to it. Print standing upright, no support needed, but might be nice…
(This is my first model so feedback is very much appreciated. Thanks in advance.) Simple support for holding the Xiaomi Mijia Hygrometer on the top of the AMS Lite, very close to the filament pools. This allows us to continue monitor the…
Also added a model with thicker base and a hole that can accommodate a bigger screw head
This is a simple holder for the LYWSD03MMC MiThermometer, which is often reffered to ATC MiThermometer due to the open source firmware, that is available for it. The greatest feature with this tiny devices is, that you can get an open…
Simple and easy holder to clip a Xiaomi LYWSD03MMC into the lid of an IKEA KORKEN glas. It sits in the space in the lid and can freely rotate. I tested it with a 0,5L KORKEN glas. But it should also fit the 1L, 1,8L and 2L KORKEN version.…
![Wall mount for Xiaomi Mijia temperature / humidity sensor LYWSD03MMC [Light weight]](https://media.printables.com/media/prints/10a9fbc9-8878-4b6c-babb-c2fdd1260dcb/images/9287229_0f07cc27-fc48-4375-a3ae-abfe6a1a4d7a_e87e254d-f6f3-47d4-a9b5-bc0d54600f64/img_20250322_181906.jpg)
