Liczymy pasujące modele…
PDW conversion kit for cyma cm030 (glock 18c) with retractable stock. I used a 8.5mm fenolite tube as stock tubes, but you can use metal rods. Just remember to make slots for the catch lock the stock. The assembly uses a few M3 screws and…
Printed it with 10% grid infill, 0.30mm layer height and two perimeters. This leads to a very light print, but putting some EPDM pads on the bottom prevents it from slipping around your desk.
Made this for my Meteors 65 Pro and 75 Pro that have a M03 VTX. Works well with mcstinky canopy and C03 camera. Weight is 0.1g when printed without supports, 3 perimeters/walls and 0% infill. I set extrusion width to 0.3mm on my 0.4mm…
I adapted an insert for the FMchip FM03 soldering iron, remix a second insert for a helping hand, and also made a flux container. Parts from the other designs: Outer case from here Solder reel from here Improved Iron stand Helping hand…
Since almost everybody in my team got a G18c (cm.030) I wanted to tune mine optically. The result is this picatinny rail for mounting a red dot or a reflex visor (ca. 22 mm). Even if you don't want to mount a special visor on the rail you…
AEP Glock 18 CYMA CM030 gearbox cover Print settings: 0.2mm layer 4 walls Organic tree support 25° Place it to flat side down on bed
A tenting wedge at 30 degrees for Protoarc EM03
AK74UN CM035A Handguard Print settings 0,2mm layer 5 walls 30% infill automatic normal - snug supports
The G18c (cm030) is a really nice airoft AEP, but in a fast combat its really hard to aim very precise. Since we are often playing CQB with 0,5 J only and I don't want to buy a gun above 100 € with 0,5 J I decided to create a fore grip to…
This is an AK105 style front sight for the older AKM Cyma CM036. It may fit other Cyma AKs (or other brands) if they have the same screw attachment system. You will need the original screw (or the same) to attach the front sight under the…
Eachine e160 / JJRC M03 main gear. Includes a spacer to be installed between the gear and the bearing. It is recommended to print it with a 0.2mm nozzle or inferior. Adjust layer height accordingly i used 0.10mm. The speed must be kept…
Servo Arm for Eachine e160 and JJRC M03. 0.3mm nozzle or smaller recommended. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Filament: Tucab PETG Category: Hobby
Improved version of the angled wedge for the ProtoArc EM03 trackball. Modifications: By default the bottom of the wedge is flat. By adding little silicon feets, the double sided tape tend to slip causing the mouse to be crooked. So I…
To print with 25mm spools: use this adapter in the left 15mm slot use the original right side piece in the right 53mm slot cover the spool sensor on the underside of the lid with tape to disable it In the Phomemo app: use the Notes…
Want to make your old or extra Tamiya M03 into a Tamiya FF02? This is the way, use these parts with Tamiya TL01 suspension arms to do it. Copied part from a original Tamiya FF02, center section is made so it provide good place to put ESC…
CL1M03 is a sleek autonomous multipurpose truck designed for visualization and real-time presentation. Rendered with PBR materials and clean topology, this upload includes GLB/FBX previews optimized for Sketchfab’s realtime viewer.…
CL1M03 is a sleek autonomous multipurpose truck designed for visualization and real-time presentation. Rendered with PBR materials and clean topology, this upload includes GLB/FBX previews optimized for Sketchfab’s realtime viewer.…
For the BETAFPV M03 5.8G VTX. Link to the VTX Webpage . 25.5mm mounting allows mounting of the VTX above the AIO board. Print with PETG, ABS, ASA, or any other heat-tolerant materials. Not PLA. I'm using it on the Armattan Tadpole frame…
Amplifier will fit in the mount with the controls facing downward. Printed 0.20 mm layer with PLA and 15% infill.
I have various old notebooks lying around which I want to keep. However - LiIon batteries get dangerous to keep after some years of non use (or even used). So if you do the math on how many batteries you might have in your home, you…
Modified original Modular_008_Main to be a niche and then further added a niche that has two sliding doors that are hidden by a false wall in the body. The parts slide together nicely and then the mid brace can be superglued in place. I…
Jig for Igubal KBRM03 3mm rod ends. I made this to bolt onto 20x60 Linear Rail. Link to purchase rod ends: https://simplybearings.co.uk/shop/p600001/igubal-KBRM03-Right-Hand-Thread-Rod-Ends-3mm-Bore-M3-Thread/product_info.html
