Liczymy pasujące modele…
This is an adapter to fit a crane stock on an airsoft M249 Compatibility: tested to fit on my Classic Army M249, which should mean that it will fit the A&K M249 as well. According to the comments, this is also confirmed to fit on a G&P…
A short rail adapter that replaces the stock bipod on an airsoft M249. Mount your own bipod, foregrip or flashlight
A printable, lighter gearbox shell for your airsoft M249, for use with an HPA engine. Tested with CA, should fit A&K too. I used a Digispark “arduino-style” board as an FCU along with an IRF520 breakout board, but the design should allow…
A freecad make of the M249 with an optional ACOG, vertical grip, suppressor, etc. I suggest that you print the model vertically, 100% infill, supports on, and layer height as fine as you can make it. I used a .4mm nozzle for my results,…
A bipod adapter to use any generic bipod on your airsoft M249. Tested on CA, should fit A&K. Maybe G&P. Does NOT fit Specna (thanks Fandaboi)
A short barrel extension that matches the stock aesthetics. Required for mounting a suppressor on the para model.
Hi guys I made this kit to make a M4 look more like an lmg the original idea was to make the handguard and stock, but I decided to make an M249 Dust cover, although i recomend just making the handguard and stock, the stock is a modified…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M249 Gunner unit.…
Heavily modified version of the A&K Adapter since that one wouldnt fit on the G&P model in multiple dimensions. Field tested and extremely sturdy when printed (at least almost) solid.
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the U.S. Army M249 gunner unit…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Ukrainian M249 (SAW)…
This improved Boxer Pro sight reuses the original picatinny mount and hardware. Remove the two screws in the original sight, install the new sight/side plates and re-tighten screws. A drop of super glue can be added to the plates to keep…
Nozzle: 0.4mm Layer height: 0.2mm Infill: 20% Supports: yes Material: Prusament PETG For textured look: Fuzzy Skin: Outside walls Fuzzy skin thickness: 0.1mm Fuzzy skin point distance: 0.2mm
Here are the models for VFC M249 HPA Frog mod - Hose retention clips and tube benders. For details see the video:
VFC M249 Feed Adapter for Box Mags and other feed types you need the Feed Adapter is placed on the bottom instead of the top, making reloads easier and more ergonomic. Designed around the following Hardware - Retro Arms M249 Bowden Spring…
These are snap on cheek rest risers for the A&K M249 Mk46 airsoft LMG. The stock AEG doesn't have a sufficiently high cheek rest for any type of optic or sight, so I came up with 2 designs that snap on. The 15mm version has a much tighter…
M249 Handguard system for the VFC M249 Parts Required 2x M4-16mm Screws 5x M4-20mm Screws Optionally (if you edit the model) Heat set inserts) Model is configured to have screws screwed into plastic, you can modify the handguard yourself…
Mount for DC-DC Step Down Buck Converter XH-M249 . Attach the mount with a two-sided tape to the pad. Print Settings Printer: whatever Rafts: No Supports: No Resolution: 0.2 Infill: whatever Filament: whatever whatever whatever Category:…
Low profile handguard for the VFC M249 GBBR, made to be more comfortable than pic rail handguard while still retaining the ability to mount grips Required Parts 2 - M4x8mm Heat Set Inserts 2 - M4x12 (up to 16mm) Counter Sunk Screws
Models of parts that were mising on my m249. So I make my own. Based on pictures and dimesions of my gun.
Hi, i made barrel mount for G&P M249. It is my first 3D model so it needs to be polished.
Somehow, one of the metal clips on my Specna Arms M249 Edge just broke off, so i designed this thing. i designed it as close to 1:1 as i could so that i could make it out of metal, and that means that if you wanna 3d print it, you'll have…
I used a switch direktly conectet to the wires of the motor. i used a T Plug in between them but it will only fit verry tightly (optional to tetach the grip from the MG). u will have th bridge the original swith with is located abouth the…
Ever wanted to mount a picatinny bipod on your very own airsoft M249/Mk46 because the stock one was pissing you off, but you still wanted a bipod that would swivel around the gas block? Are you just too cheap to shell out a fortune for a…
Ever wanted to mount a picatinny bipod on your very own airsoft M249/Mk46 because the stock one was pissing you off, but you still wanted a bipod that would swivel around the gas block? Are you just too cheap to shell out a fortune for a…
I really wanted to put on a different bipod on my airsoft M249, but I didn't like the options available. As a result, I have created this remix! This variation of bipod rail adapter is beneficial in that it attaches to the metal bipod…
VFC M249 Feed Adapter for Box Mags and other feed types you need the Feed Adapter is placed on the bottom instead of the top, making reloads easier and more ergonomic. Designed around the following Hardware - Retro Arms M249 Bowden Spring…
Low profile handguard for the VFC M249 GBBR, made to be more comfortable than pic rail handguard while still retaining the ability to mount grips Required Parts 2 - M4x8mm Heat Set Inserts 2 - M4x12 (up to 16mm) Counter Sunk Screws
Nozzle: 0.4mm Layer height: 0.2mm Infill: 20% Supports: yes Material: Prusament PETG For textured look: Fuzzy Skin: Outside walls Fuzzy skin thickness: 0.1mm Fuzzy skin point distance: 0.2mm
Special stock designed to fit in a G&P M249. Original stock broke during a game event. Due to portuguese Law we have to paint our airsoft replicas in the front and back in fluorescent yellow, that is why there is a yellow part and another…
What's better than an MP5k? An M249k, because higher numbers = more better. Tested to fit on a CA, should fit A&K.
Hi guys I made this kit to make a M4 look more like an lmg the original idea was to make the handguard and stock, but I decided to make an M249 Dust cover, although i recomend just making the handguard and stock, the stock is a modified…
Hello Long avaited part - a working and fitting magazine lever wnich works with classic army m249! Just plug and play - if you want to tweak something , feel free to modify the .STEP file I attached. Things I recommend to modify in case…
Simply push out the pin with a small screwdriver and take out the old clip and spring. It is useful to attach the spring to the new clip with some adhesive tape in order to put the pin back in it's place again with the spring at the right…
M4 stanag adapter for AEG m249 box magazine Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Esun PLA Category: Sport & Outdoors
For now, it's the left leg, I'll make a right one later but so far so good.
![VFC M249 GBBR Feed Lip Adapter [REV.2.0]](https://media.printables.com/media/prints/11ea63d0-7ea2-4c23-8ffe-9884a02f3f90/images/12600941_d14e527d-bfa4-4d32-97c0-7e1c9f45afa6_2094483c-7050-48f3-9a04-dd0e3f106d90/sqss-rev21.png)
