M249 crane stock adapter (airsoft)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to fit a crane stock on an airsoft M249 Compatibility: tested to fit on my Classic Army M249, which…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 383
- Wydruki
- 1
- Wyświetlenia
- 2575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter to fit a crane stock on an airsoft M249
Compatibility: tested to fit on my Classic Army M249, which should mean that it will fit the A&K M249 as well. According to the comments, this is also confirmed to fit on a G&P M249.
Hardware:
- Buffer tube (I used a Specna Arms variant) with the included M5 screw
- M5 nut
Printing instructions:
I believe the strongest print orientation is to print the adapter on its side (as shown in the first picture). Use supports and PLENTY of walls.
I printed this in PA6+CF filament and it seems fine, but your mileage may vary and you are using this at your own risk.
.Step file included
Print Settings
Printer:
Voron 2.4
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
40
Filament:
eSun PA6-CF
Black
Category: Sport & Outdoors