Liczymy pasujące modele…
Ryobi Rotary Tool model FVM51 Gridfinity bin created using a fusion360 Zach Freedman generated Gridfinity bin. The model holds the tool, two batteries, the accessory box, and extra bits, sanding, and polishing pads and paste. Printed with…
Replica of the original part BM51-A31066-A Is not 100 percent equal, but the holds much better Please only print with ABS or PETG or materials that will not bend at higher temperatures. I printed with ABS, Layer 0.12, speed 80mm / s…
See here how to create the soldering connections: http://www.winko-erades.nl/using-an-esp32-and-pcm5102-as-a-bluetooth-audio-receiver/ YAML Code for ESPHome: i2s_audio: i2s_lrclk_pin: GPIO15 i2s_bclk_pin: GPIO4 media_player: - platform:…
Included two STL files - white part and black part. I printed ok without any supports or brims.
tight tolerances, make sure your printer is properly calibrated, 0.2mm layer height friction fit for ESP32S3 and PCM5102, box clips together both usb ports and 3.5mm audio jack exposed
This is an inno-maker usb-dac case. Optimized for raspberry pi zero w. You need M3x8 (or M3x12) hex head screw x 4 M3 din562 square nut x4 Details of usb-dac https://www.inno-maker.com/product/hifi-dac-hat/ Enjoy your Volumio life. Print…
ROG Ally stand for UGREEN CM512 HUB
Print 2 of these, slide them on the ends of the Revodok and hang it on your desk. What more is there to say! Link to the Revodok used to make this:…
This is a bracket I made for an electric motor that is used in model building (in this case a ship). Designed to fit the motor snugly, with multiple holes (M4 size) to attach the bracket. I have printed it in PLA, however PETG would…
Swatch x Hodinkee Sistem51 Stoplight 20mm adapter
Update: Of course almost immediately after I uploaded this it turns out there were already hangers available for this model rotary tool under the non US part number. So for reference, the US version of this tool is FVM51 but it looks like…
bike headlamp holder Fenix HM50R, Fenix HM51R, držák čelovky na kolo Fenix HM50R,Fenix HM51R
added a Raspberry Pi HiFi DAC Mini HAT PCM5122 HiFi DAC to the case, I am using as a audio player.
My workbench has a shelf right at eye level. I figured it'd be nice to be able to attach my meter to it to reduce clutter.
Крепление Runcam Thumb для Diatone GT M515 (Diatone GT-Marauder515 M515 Normal X Split). Рекомендую не падать с таким креплением, погнете алюминиевую клетку. 16:9 21:9 + Gyroflow
Simple remix so you can mount this ugreen CM512 USB hub to a skadis board.
These are 2 Parts, print them both with the outside face down. Screw holes in the bottom part should be wide enough for a 3mm screw to pass freely, and the top parts is narrow enough to cut a 3mm thread into. In the top are 2 thin…
i cant find any good looking small case for volumio player so i made one Inside there is space for raspberry pi zero, any model should work, in my case i use 2 w and PCM5102 (yellow from aliexpress) Two half holds without screws and it's…
This model is for an easy print to mount up the BM5150 or similar Vtech 5" parent units to the wall. While rough around the edges due to minimal refinement it does the intended job fine. Prints on untuned machines reasonably well and in…
As I was building my fake Rivendell bike, I needed to move the chainring a bit more towards the center of the bike frame to decrease potential crosschaining when using the largest cog on the rear cassette. I crated this spacer that…
Motherboard and Raspberry Pi mount for Alunar m518 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1pqiSidsSEC Category: 3D Printer Accessories
This mount is designed to securely hold the rear satellite speakers from a Vizio M512a-H6 surround sound system while keeping a low profile against the wall. It may also fit other speakers with similar mounting geometry, but only this…
This is a simple stand for an Amprobe PM51A multimeter. This might also fit the PM55A. Category: Electronics
Wall mount for the Zyxel PM5100-T1 ONT and similar with an internal compartment to store the excess fiber optic patch cord. ISP-supplied patch cords are usually much longer than needed when the ONT sits next to the optical termination…
Replacement foot for the Fluke PM5150 AWG. Mirror it for the other foot.
I added a space for small relay module for turning on and off the speakers power. You can use Squeezelite for exaple i think, or it can be used with HA to control the relay.
These 3 parts allow you to create a dust collection system form my Shapeoko CNC using: Dust Deputy Low Profile Dust Separator Vacmaster VWM510 5-Gallon 5 vacuum Sweepy 2.0 Dust Boot Standard 5 gallon bucket Shop stool (attached the bucket…
Da die alten Motorlager meines Viky-Motors mittlerweile sehr mürbe waren, habe ich den Versuch gestartet, sie aus TPU nachzudrucken. Sind zwar erst 500km eingebaut, aber halten tatsächlich bisher besser als erwartet und dämpfen die…
The purpose of this file is to enable you to replace a broken hinge piece for a fridge door compartment (e.g. the compartment in the door for butter, or eggs, or whatever else you have to cover when the door is closed), rather than spend…
300W 20A DC-DC buck converter enclosure with WAGO 221-413 in and out
Da ich für den Seeed Studio XIAO ESP32S3 in Verbindung mit dem DAC PCM5102 kein passendes Model gefunden habe, hab ich mal eins erstellt. Es gibt 2 Versionen, einmal für eine kleine interne WLAN Antenne und eine mit Aufnahme für eine SMA…
This mount is designed to securely hold the rear satellite speakers from a Vizio M512a-H6 surround sound system while keeping a low profile against the wall. It may also fit other speakers with similar mounting geometry, but only this…
tight tolerances, make sure your printer is properly calibrated, 0.2mm layer height friction fit for ESP32S3 and PCM5102, box clips together both usb ports and 3.5mm audio jack exposed
