Liczymy pasujące modele…
Needs to be printed with 0.1mm layerheight or better. 1 June 2025: added “M65Front_Copal_GENERIC v1” both as STEP and f3d files + “M65_flange” as STEP. for easy modifications.
ALPA M65 lensboard find press ring here https://www.printables.com/model/1029055-m65x10-press-ring
for use with M65 17-31mm focusing tube, see https://www.printables.com/model/1400453-linhof-617s-iii-lens-super-angulon-72mm-xl as an example I generate common schneider lenses, since their EFL are easy to find. I also provide a hpf…
For the Baseus Adaman Powerbank (PPADM65 20,000mah) v1.1 fixes some double geometry that was present in the original model. Slightly increased tolerances, which should make it grip the Steamdeck and the Powerbank better. Inspired by…
Important updates 2026-02-27 : Got a new set of helicoid adapters and found that they have around 313 degrees of rotation compared to 167 degrees on my previous ones. So I added"extension" and "max rotation" as adjustable parameters to be…
Hello. This is my remix for a Logitech mouse m650 stand/holder.
Foot pedal frame to house a Logitech M650 mouse, creating a wireless silent foot pedal for spamming left click (OSRS) The retaining “nubs” aren't exactly secure for the mouse but the mouse is very unlikely to come loose from the pedal…
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
DVD Slot 2.5 inch Hard Drive Bay Adaptor for Dell M6400 M6500 I use Akai AK-OA2SSA-BK PCB. I order Akasa SATA Bay 2.5" SATA HDD adaptor, but it is too thick to my Dell M6500. I dismantle the adaptor, and I took PCB out of it. Category:…
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
This 3D-printed mouse mount is my own design, inspired by kizmann’s “Mouse Wall Mount Unisize.” The screws I’m using are shown in the picture. PrusaSlicer doesn't require support for this model.
As stated before, this will mount a KM65 6.5" speaker to Apache 2800 Case with ribs. There are two versions, one that is the dame diameter as the speaker and one a little wider. I liked the look of it beeing wider, your choice. Material:…
Print out of hard TPU, like Flexfill 98A. Can probably be printed out of PET as well, but fitting the VTX into the slot might be hard. Longer M1.5 screws are needed for the VTX, but the VTX can also be just slid into the slot and will…
This is a ring to mount a Copal 0 (or similarly sized lens/shutter combo) to one of the M65x1 focusing helicoids. Did not think 3d printing such fine metric thread would work, but it does. Printed with 0.2mm layers, and a 0.6mm nozzle…
Wanted to make something using heat set inserts so I tried with this simple thing. I printed in PETG+ 0.6mm Nozzle, 0.30LH since I had extra filament around, probably fine in whatever. Inventory: Clock movement: (…
I created this M65 mount that gives you the proper flange distance for fixed infinity focus for the Nikkor 90mm.
Made this because the original powerbutton got stuck through the switch. Now I could glue the switch into the button and pull it out. In V3 I added some knobs to glue some shorted springs from a pen into it.
A minimalist, low-profile custom bezel designed for the square Casio G-Shock GW-M5610U & GW-5600 series. Designed for those who want a cleaner, slimmed-down look without unnecessary bulk. Tested on: Casio GW-M5610U Casio GW-5600 Expected…
SILVERCREST® Multifunkční kuchyňský robot SKM 650 A1, šedá https://www.lidl-shop.cz/SILVERCREST-Multifunkcni-kuchynsky-robot-SKM-650-A1-seda/p100306953 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
Smoke M65 - Wallmount Category: Household
Zoom65v3 Encoder Bracket if you want to 3d print a matching color bracket. Would suggest to print at 100% infill just for the strength works perfectly have printed it my self, almost unnoticeable in the right color This was made because…
This case helps with installation of your loksound 5 (58410). The decoder snugly fits the case so you can insert and remove the decoder for maintenance or replacement. Position it horizontally or vertically to fit your model locomotive.…
Fenix HM65R helmetmount Print with PETG Can be mounted with zipties or doublesided tape
Hello. This is my remix for a Logitech mouse m650 stand/holder.
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
Important updates 2026-02-27 : Got a new set of helicoid adapters and found that they have around 313 degrees of rotation compared to 167 degrees on my previous ones. So I added"extension" and "max rotation" as adjustable parameters to be…
Exactly what it is. Prevents dust from landing on your paper, while not in use. Pretty sure can fit other similar pantum models. Print without supports.
I recommend printing this tilted 90° to ensure the legs are printed horizontally for added strength preferably at a small layer height so that they're as round as possible, I'd also recommend filing the wider part of the legs just a…
