Liczymy pasujące modele…
UPDATE: If you are printing with Silk PLA or have issues with the pin breaking during assembly please use the "flat pin" file for a stronger print orientation. UPDATE: License changed to allow commercial use, please credit my design if…
A helpful lid that you can screw onto a standard mason jar to create the perfect fruit fly trap. Put a bit of liquid bait inside (just about 5 mm deep), and place where it's needed. There are many commercial fruit fly liquid baits…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Easy to print and Assemble Mason Jar Candy Despenser. Only two parts to print, prints with or without supports. Uses one M4x20mm (or similar) screw to attach the knob. Sized…
This should fit any wide mouth canning jar. If printed well, and well tightened, these lids are almost watertight (actually, they form a tighter seal than the commercially sold counterparts but not air tight. These are suitable for use in…
I found the original difficult to print as the logo was protruding so it could not be printed with the top of the lid face down. I wasn't particularly bothered about the design so I removed it. There is also an alternative design which is…
Both lid and body are the same size. This is so that it can be printed with any extrusion width size. In order for the lid to fit properly, it has to be scaled with a formula. Follow these steps: Determine the desired scale. 100% is about…
Mason jar lid organizers Provided in STL, SLDPRT, and STEP formats and have provided the Onshape link for edting as well. Made to function like this: Amazon.com: AIEVE Mason Jar Lid Organizer, 4 Pack Mason Jar Lid Storage, Canning Lid…
I've caught a lot of mice with my earlier version of this trap, designed for Adam's peanut butter jars. (We eat a lot of peanut butter.) I've even caught two mice at the same time. This version is designed for standard 32oz (or standard 1…
Attach this to the top of any standard mason jar, and then enjoy sliding multiple coins down the ramp - watching as they accelerate towards the apex of the vortex. Printing Notes: This is an easy print that requires no supports. The STLs…
2 x 2 organizer for mason (Ball) jar lids, both standard and small. Half-size version is 1 x 1.
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
Threads for a standard mason jar lid, built in Fusion 360, fully parametrized, for use in other designs. I couldn't find a fusion360 source file to use in other designs, so i built this to share. It's largely based on the thread pitch in…
A stronger wide-mouth mason lid jar lid than I was able to find. Print Settings Printer: Qidi X-One 2 Rafts: No Supports: Yes Resolution: .016 Infill: 100 Filament: IIID PLA Grey Category: Kitchen & Dining
This keeps baby chicks from spilling their feed all over the place and uses a mason jar. I chose to print in PETG for longevity but be aware the big overhang section is 64 degrees so you will need to either use low layer height or…
This is a screw on lid that turns your standard mouth mason Jars in into a bird feeder. The hanger was made with bailer twine that happened to match my filament color. Forgive the macramé job, I was winging it. Updated: I would suggest…
Requires: Wide Mouth Canning Jar (Mason Jar) with Lid Ring M4 x 20mm If you print the Back Hidden Screw file make sure you glue the front on first. Then put the knob on with the screw. Then glue that back. 04.21.2024 update. Added a new…
Lego brick generator tool - for simple 2x1 or 4x1 bricks with brick pattern side. Very useful for architectural builds, castle walls etc. The pattern is on both sides and it is reccesed into the brick wall so it can be stacked side by…
If you're like us, you have dozens of Mason jar lids and rings floating around. These holders will keep them under control. The set includes a ring holder and a lid holder for both the small and large mouth Mason lids. Category: Kitchen &…
My lids for my Mason Jars got a bit of rust which is why i made some myself. Works for the 86mm wide mouth versions. No supports needed. ----------------------EDIT-------------------- As per @WackoPrints_268317 's hint I changed the…
Let your kids explore the world of construction with this fun and realistic Sand Mason Toy Set ! This 3-piece set is perfect for building detailed sand structures at the beach or in the sandbox. It includes: 🧱 Brick Mold – a block-shaped…
Found this awesome print at: https://www.thingiverse.com/thing:5008465 Nothing to it but to do it.
This is a waterer for young chickens, quail, turkeys, etc. It uses a regular mouth canning jar. The Aldi's spaghetti sauce has a mason jar top, so they work perfectly. It is shallow and narrow to keep the chicks from walking in it.…
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
Hummingbird feeder that attaches to a mason jar (standard lid, not wide mouth). Used @IanFoulds Mason Jar Ring for the threads and his awesome bird (seed) feeder as inspiration (see referenced models). Pictured feeder utilizes…
Split so you can do different colors. Use the New Longer Knob for Multicolor. The New Knob with Color Arrows is the shorted one for the original base print. 04.21.2024 update. Added a new Knob with different tolerances for the arrows. If…
This print is a threaded to be a standard mason jar lid. Just put some bait in the jar and the pests fly in and are unable to find their way out. Has a convenient spot to hang the trap should you want to. I suggest not using sweet bait as…
Fits standard USA Mason Jar (Canning Jar) Wide Mouth jar (Large) and Small Mouth jar (Small) No supports needed. You will need to flip the model over to put the top side down on the build plate. The “Ring” is designed to put a standard…
This project requires just a few household items along with these printed parts to make your own, fully functional, candy machine. Required Tools: Hot Glue Gun Side Cutters and Utility Knife(for cleaning up prints) Required Materials: Pen…
Template is in STL and STEP file formats for easy modification. This is a great way to design your own lid.
The perfect set-and-forget planter for people living with cats or other plant-munching beings. My sister sent me a Tik Tok video of someone who was selling a similar 3d printed double mason jar planter and told me she wanted one, as she…
Mason jar lid with straw hole
Plant Propagation Lid for Mason Jar. Fits half-pint mason jars and aids in plant propagation by holding your plant cuttings so while they grow roots in water.
This is a remix of the original model from Carl Belcher Link below… THANK YOU. Note: the back had my name ( the model uploaded here is plain, you can customize it with your name ) Here’s a Quick Video showing the print and how to fit it…
This mason jar lid holder was made as a gift for my sister. It has holes at the back for easy cleaning and a little depression on the front of the lid holders to help pick up the last lid. It's quite a large model at 225 x 241 x 121mm.…
Ornament to remind us of our fraternity, and obligations
No Supports! Added more holes and increased size. Also added center cone to improve results.
This should fit any standard canning jar. If printed well, and well tightened, these lids are almost water tight (actually, they form a tighter seal than the commercially sold counterparts linked above), but not air tight. These are…
This fits Atlas Mason jars. Please ensure that your jar's threads have 4 thread starts, or this will not fit. Your success in this catching any any of the pesky little bugs is really dependent upon your bait. Personally, I never ever did…
Mason Jar lid replacement for hydroponically propagating you plant trimmings. Does not require growing medium or 3D printed supports. Place plant trimmings into device. Place Jar in sun light. After about a week there should be root…
I made this model to utilize spare mason jars around the house. The watering spike keeps the water coming out at a slow enough pace to where you can set, forget, and not have to worry about watering your indoor plants for a *period of…
This is the new and improved version of my previous mason jar lids that I made. This version needs NO supports, and it uses silicon seals that I bought off of amazon. Please reach out to me if you have any question and enjoy the print!…
UPDATE: 2/15/2020 Adjusted parts 1 and 2 for better fit. Removed extra shells. UPDATE: Model simplified and reworked for a better printing experience. Added a nail hole on the back side to make it easy to hang. This is a slight remix of…
I've always been a fan of the look of polygonal masonry, but it's hard to find (freely available) dungeon tiles. The ones I do find aren't as compatible with other tile sets I use. So I figure if I'd need to remix something anyway, might…
This double ended coupler will allow you to make a mini green-house planter out of two standard mouthed mason jars. Designed for Ball and Golden Harvest regular mouth Jars, but works for many others. Place these two pieces together with…
For this print you will need two M3 screws any size. I would use .28 layer Hight for faster printing and 10% infill is fine. Comment if you have any issues, or questions.
Two different traps for fruit flies when used with shallow Mason jars. I recommend filling the jar with cider vinegar to within 1/4" of the bottom of the trap. A drop of dishwashing detergent helps. Print Settings Printer Brand: ANET…
Fill 1/3 of the jar with water and a add a scrap of raw fish or raw meat. Screw the cone or tubes part in with the lid ring, them pop the top cover into the four small holes. Within a few days, as the meat decomposes, the flies will start…
This is a spice lid designed to work with a regular mouth mason jar. I was not happy with any of the options available for spice lids. While I still have some tweaking to complete, I am happy with what I have made thus far. I was inspired…
This attachment allows for a clean pour from a mason jar. Without this adapter, water needs to be poured too fast or you risk having water run down the side of the jar and making a mess. This model is for a wide-mouth jar, but to fit a…
My wife wanted a mason jar fruit fly trap, so I made this. I made it for both wide mouth and regular mouth jars, both quart and half pint jars. Make a simple but powerful fruit fly trap by putting a small amount of apple cider vinegar in…
Transform any regular mouth mason jar into a convenient piggy bank with these 3D printable lids. Perfect for saving spare change, setting aside money for a vacation, or a swear jar! Included Options: Built-in Bank Lid: A lid with an…
Jig is designed to work with 30mm deep join for 750mm depth of worktop. You can simply do the math for narrowed pieces. Depth of the join is 35mm maximum, for smaller inset depth just offset the jig “to the left” on the pictures Print…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9vHC7OP7r4G Category: 3D Printing
Created a model for a airbrush cleaning jar lid instead of purchasing a cleaning jar separately. You can use whatever you like for the reusable filters and add a lid.
Saw the original and tried it out. Flies went in, but were also getting out. I recreated the thing in Fusion based solely on the diameter of the original. I moved the holes closer to the middle, made them smaller, and made the tubes…
Simple Lid for wide mouth mason jar for growing sprouts.
A two-piece lid for wide mouth mason jars to be used for sprouting seeds. If you are new to sprouting, there are plenty of instructional videos on YouTube . They are extremely easy and fast to grow yourself. I have found that these lids…
0.20mm, no support needed Designed specifically for standard-size Mason jars, this product is the perfect solution for growing broccoli sprouts. Its tailored size provides an ideal environment for optimal growth of broccoli seeds. You can…
Its use is pretty simple and straightforward, if you know you know. This works for Storz & Bickel capsules and also works for the Planet of the Vapes (POTV) capsules that fit the Lobo, One, etc. I recommend printing “right-side up” for…
Airbrush Cleaning Pot/Stand for Mason Jar
This is a bee waterer remix which uses as screw on wide mouth mason jar for the water container. Edit 05/17/2026: V2 adds standard threads so you can use either a standard or wide mouth mason jar. If using standard don't screw all the way…
This is a simple print for sprouting lids on a mason jar. I have included wide mouth and standard mouth lids. To print these successfully you have to set the top and bottom layers to zero. I have included the gcodes for PETG. I choose 40%…
Took the base of the Nutella Candy Dispenser from Sui77 and removed the threads, I then added new threads and raised them up to fit a regular mouth mason jar. I have also added a wide mouth version. 0.2mm layer height, 20%infill, 2 walls.…
All the models for this I found used too much material and took way too long to print so I made my own Requires bait to be placed into the jar, watermelon has worked for me in the past. It does not require supports Example printed at…
A mighty owl builder with natural stealth and night-vision. Collect them all! This one is a special request , enjoy!! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print…
Created entirely from scratch with inspiration from https://www.printables.com/model/412974-simple-mason-jar-candy-machine-updated-with-printa/comments/800004 since I wanted to use peanut m&ms with it and it wasn't large enough to…
This is a 1:48 scale version of the classic 8in by 8in by 16in Cinder Block, so called because they were originally made from compressed cinders, common byproducts from burning coal. These are now typically known as Concrete Masonry…
2 organizers for mason jar lids: Mason Jar Lid Organizer Regular: 4 slots for regular mason jar lids Mason Jar Lid Organizer Wide: 4 slots for wide mouth mason jar lids At 200 mm tall, these organizers are near the maximum height…
update: I've made the license commercially available to you. I like to pay it forward as I have made my share of money off of free models. Anything that can potentially make someone's life or health better, I will release as commercially…
I have tried all the coffee extractors on thingiverse. All ultimately broke except the "Yes another coffee extractor but stronger" by buzzerco. The problem was the coffee often gets stuck because of the cross beams. I added some more…
I loved samuel's original design, but only had mason jars laying around so I remixed his with mason jar threads replacing the 4 prong type used by jelly/spaghetti jars. I also rotated the drain holes within the center of the juicer to…
Ever want to get into hydroponics (growing plants in water), but only had a bunch of mason jars? Well, if so, here's a solution for you. Get your own hydroponics garden in under half an hour! Assembly/Usage: Replace inner portion of mason…
I loved the coin vortex by @squinn but I wanted to make it bigger. Unfortunately you can't scale this model since it has threads on it. So I remodeled it in Fusion and maxed out the bed of a BambuLab printer (256x256x256). Ended up being…
Nothing against Mason jars… we just didn't have one on hand. Decided to just create a printable one using FreeCAD and see how it turned out in clear PETG. I printed in vase mode with 0.4mm nozzle, 0.8mm line width, 0.3mm layer height…
This design will fit a 20mm height bee hive opening and should fit most 1 quart mason jars. Print settings at 0.2 layer height in PETG with support.
Description: EDIT: At some point a Fusion 360 update pretty much broke my .f3d file. I have attached an STL export of the working design. NOT REALLY DESIGNED TO BE PRINTED! I haven't printed this model because it was actually used to…
World Piece! This unique piece was made to help bring about world peace. Its glass downstem leads down to an astounding 208 hole percolator that delivers unmatched smoothness. The percolator also features an open bottom which makes it…
This is a remix of Iron_Scorpion's Pistachio bowl jar top that has been modified for easier printing. First picture is after, second picture is before v2 has been scaled up 3% for a better fit Huge thank you to Iron_Scorpion for…
This model has been printed for a regular mouth Mason Jar, and with 2 inches of Apple Cider Vinegar in the bottom of the jar, it works great! OpenSCAD file to create Mason Jar lids with a cone shaped hole to act as a fruit fly trap. Use…
Now I just need bird seed… Print with supports
This is a Jar Ring for a wide mouth mason jar. It's a remix of AlexEnglish's Canning Jar Lid (http://www.thingiverse.com/thing:19105). I uploaded the Wide Mouth version of his Lid to TinkerCad, and punched a 73mm hole through the center…
Lid, spout, funnel, and strainer mesh for regular mouth jar. Lid and spout for wide mouth jar. I'll continue adding to this as time allows. Make sure to check the slicer settings and adapt it for your printer. I printed most of these with…
This is replacement for a mason Jar ring if you don't have the metal ring. Though I would not try to actually can using this ring. Mostly I posted this so that those of you out there not familiar with how to do the thread would have a…
Mason jar lid storage for 12 sets of the two-part lids. Three different variants depending on your preferred print method. The primary model is a single print with the two others being split into two.
Use this keyring to symbolically show you are a brother mason and to remind you of your obligation and need to do good work
The STL fits a wide mouth mason jar, but the model is parametric and can probably be resized to fit other jars. It has been optimized for a .6 nozzle with a .84 extrusion width. It prints fine with .3 layers.
Mount for mason jar (70 mm). I used 15% infill for most of the print, 100% around the screw holes (probably not necessary).
Stonemasion masterpiece made of bohus-red granit und stainless steel.
This print turns a mason jar into a watering station for bees, or if it is legal in your area an open feeding station. You need to print 1 base and 8 of the grid pieces. The grid pieces are sized such that the bees can't get into the…
This fits on a standard mason jar.
Inspired by a model by Charles O'Donnell This is sized for a standard Mason/Ball Jar insert. Including parametric Fusion360 (.f3d), .step, and .stl files for customization. Took a moment to describe parameters so should be easy to modify…
I used evanphi's design but altered it to fit a wider mason jar and to be able to be closed without unscrewing it first. Also included is the option to use a brad nail for the point instead of plastic. Print the lid without supports and…
I remixed this to fit the Wide Mouth mason jar lids. In the photo you will see the original design with the standard size lids and my remix with the wide mouth lids. You can easily scale this in your slicer (uncheck “Uniform scale”) to be…
Small Mouth and Large Mouth canning jar funnels featuring a pinch tab and a hole for hanging. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.16 mm Infill: 20 % Filament: Sunlu…
I made these jar lid & band holders to tame the chaos of my jar drawer - and now you too can bring peace and order to your kitchen! The lid holders are available in three sizes (175mm, 125mm, and 90mm), while the band holders are…
Holds a stack of wide mouth reusable lids for mason jars (not the rings and sealing lids for canning, it probably does hold them just fine but I designed this specifically for the reusable screw on lids that you'd use for like the fridge…
![Mason Jar Lid [UPDATED]](https://media.printables.com/media/prints/140783/images/1335049_b5605415-9046-4ba4-a287-98bc56e41496/mason-jar-lid-2.jpg)
