Liczymy pasujące modele…
I couldn't find a matching 70W charger. Fits pretty snug, but doesn't slip. If you have trouble fitting it, try scaling it up by 0.5-1% Printed with Fiberlogy Impact PLA, 60% adaptive cubic infill (probably overkill)
A case for the dumbpad (hotswap RGB edition) providing a full enclosure with a slight angle. The top cover must be printed upside down with support enabled. All other parts can be printed without support. No screws required. Self-adhesive…
stiff Thumbick (1.8mm), printed in Prusament PetG, it works very well after some smoothening and sanding the surfaces which have Contact to the strings, with a Hairdryer it can be adapted to a perfect Fit.
This is a mount for the Runcam ThumbPro, to be printed in TPU. This case will fit a regular GoPro mount. Lay it down on the side, flat side down, curve opening to the top to print. Support only around the screw hole.
Streamline your productivity with the Dumbpad v2 Case – a minimalistic, yet functional 4x4 macropad housing with a dedicated spot for a rotary encoder. Designed to complement your Keychron keyboard, this case marries simplicity with…
Remix of the Case listed on the Dumbpad Github (https://github.com/imchipwood/dumbpad). The angle of the new case is 8.3° to match the Logitech K120. If anyone is wanting another angle, let me know and I'll knock up a new file.
Remix of the OG to support a 16" macbook
Dumbpad case remix for oled module
The printed part fits a Runcam thumb pro, and can be attached to small bases like the GEPRC for the naked GoPro from GEPRC. Screw size is M2 Print in TPU, lay it on the flat size with the curve opening to the top. Support only around the…
This is a modified version of the case uploaded by imchipwood which I believe was designed by Anthony from Australia (want to make sure I give proper credit where it's due). I just modified it to sit at an angle to match the 65% case I…
Bracket for Apple 85W MagSafe 2 power supply for mounting under the desk. Can be removed again by simply moving. Use four small wood screws for assembly. Halterung für Apple 85W MagSafe 2 Netzteil zur Montage unter den Schreibtisch. Durch…
A Vertical/Horizontal mount for the ThumbPro that fits into the GERPC naked GoPro base. Designed to be printed upwards with support only on the screw hole for best quality and printing speed (see picture for orientation and supports).…
Designed for FDM Simply roll dough to thickness and start pressing out Thumbprint cookies quickly in one step! Makes Thumbprints 2 Inches in Diameter. Paid Version Shown in Photos, This Free Version is Available for Trial Follow This Link…
I Downloaded the Fusion360 File, made appropriate changes to width and height. Moved it into Inventor (for speed) and cut it to fit, added the border. I split the model to fit on the XL's bed (yes even with a larger bed one can find or…
This is the project (not from me): dumbpad (hotswap RGB edition) here you can optionally use M2x10 cylinder head bolts (10= thread length) i recommend soldering the led's to the spicers in the housing. (so that it then simply works…
This Holder can mount on 28mm & 32mm Frames This Holder can mount with universel Cam center This Part can printed in PETG or TPU as well
This case is a remix of my handwired version, but designed to use imchipwood's PCB from here: https://github.com/imchipwood/dumbpad The 'Large' version files are uploaded and reflect the pictures of the completed project - except in the…
Thumb piece for Aergrind made by Knock https://www.madebyknock.com/ This print works have only tested with TPU
This is a remix of my earlier remix… I remixed this for the angeled stand, and have realised I kinda needed the enclosed base to stop from shorting on random metal things on my desk. The base is 1.43mm (to the lowest point on PCB mount)…
Fidget spinner thumbpad / pin. Pre printed spinner available at: https://www.etsy.com/listing/526611479/fidget-spinner-made-in-the-usa Category: Toys & Games
If you want, you can either add a ziptie to the back or thread the cable through the left open holes
Designed to allow the screen to open 10º past vertical. CAD file is parametric: OnShape
You can print the electronics faceplate alone if you want to save around 35 € on parts. Alternatively, print the faceplate plus the left and right panels to build the complete case in 3D-printed form. The 3D-printed parts include all…
Wall holder for Motorola MBP481 baby monitor.
I got a cheapish baby monitor from Motorola, while it does the trick it doesn't look very fun and I was envious of the (at least in my part of the world) discontinued arlo baby monitor that came with rabbit ears; So I went ahead and made…
I made this to help with making thumbprint cookies while keeping a consistent press every time. It includes a small handle for easily lifting the press back up. It's designed to print upside down so that the support trees don't mess up…
This is an Arduino based LTE cell phone that I built. You can read all about it on my blog: https://alaskalinuxuser3.ddns.net/2019/07/02/lte-project-renamed-bone-phone/ Here in are the stl files to print the case.
Use this piece to prevent your metal thumbpick from being squeezed in your pocket or bag. Updated V2 2026-05
We broke leg on our Motorola MBP 50 baby monitor so I created replacement. It doesn't close perfectly but doing his purpose without any issue. Nozzle: 0.4 Layer: 0.2
Hello, I am very new to uploading. this model is created by me. I hope it works. i printed it myself and it looks good to me :) I hope to upload more. Please if you do print, give me feedback on how I can improve. All feedback is good…
It is a part for extend Doepfer MBP25 keys, increasing lenght to match classic pipe organs. It adds 13 cm to keys and make it easier to play. It is a two parts model! The total length is 42cm, but it cut to match 25cm printers and require…
Plunger dish designed to fit a 6" plunger with a protruding 3" sleeve such as PlumbPak PP845-7 Print out a tester first if unsure of the fit. F3D and STEP files are included, however this is not a parametric design: The revolved form was…
Holder for pliers that works with the honeycomb storage wall
Designed for FDM Simply roll dough to thickness and start pressing out Thumbprint cookies quickly in one step! Makes Thumbprints 2 Inches in Diameter. Features: 2 Part 3MF File Detachable Minimalistic Support 30 Minute Fast Print Capable…
![[Remix] 16 Inch MBP Under Desk Dock](https://media.printables.com/media/prints/f63a6136-4179-40ce-9614-c4af6d6d6111/images/10274780_9a2c0b6a-b90a-45d1-b76a-1a574c46f85c_c4fe6d5d-d289-4b2b-b68c-9fc6dc0f8d66/pxl_20211231_192258308.webp)
![Dumbpad angled base [closed base]](https://media.printables.com/media/prints/1108285/images/8374300_d05ee8ff-81d1-4278-a2e7-ebfd5f316043_02128c6f-d14f-4ef3-a7c5-473fa512a020/dumpad-angled-with-base-infill.png)
