Liczymy pasujące modele…
Stackable tray to hold microscope slides on their long edge. My intended purpose was to be able to hold/store slides that have pre-cut tissue controls for easy access during microtomy. There is an area at the front for a label to identify…
Stand to hold pocket knives, with Microtech logo on the bottom.
This is a simple tool to remove/reinstall the glass breaker on your Microtech Ultratech or UTX-85 without marring up the material or finish. Some people suggest using an empty drill chuck, but that has historically marred up the metal…
I am working on a Han Tyumi skin set for a Lucky 13 model and decided to make a Flying Microtonal Banana for him. I will be posting Han Tyumi's head soon and I will probably clean this design up a bit, so check back in with my page. The…
Microtome is typically used for cutting very thin film layers of a specimen for microscopy. Inspired by Low-cost Handheld Microtome I prepare 2 versions of body with space for metal Washer M10x29.5x2.5mm with Washer space filled Model is…
The MicroTrackRC is a small 3d printed tracked vehicle. It is designed to be easy to print and assemble and use very cheap readily available electronics but still be a very fun project to build and drive. I printed all the parts on two…
remix of Microtech Jagdkommando by Nikola Svilar: https://grabcad.com/library/microtech-jagdkommando-2 all i did was make it so that the blade and handle can be printed in separate pieces and the screwed together with a screw. the rest…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
This is the surface of a heavily armored fish created from CT data. It prints most easily with dissolvable supports. It is printable with removable supports but the pointy bits will hurt your hands.
Custom cover for the Microtik CRS310 to accommodate 120mm computer fan. Printed with PLA or PETG with support on build plate only. (Fan cover model: https://www.printables.com/model/334447-hex-fan-cover-120mm)
Custom cover for the Microtik CRS310
A Bead Dispenser for dispensing beads into microtubes in a standard 64 tube format tube rack.
This is a custom remix of an OTF knife cover designed to replicate the sleek aesthetic of a Microtech-style OTF knife. The model has been carefully adjusted and optimized for 3D printing, making it a practical and stylish addition to your…
I did this stand for my friend. His request was microtech logo and this is the way.
I saw everyone buying one for $20, just figured I could print it out and stick it on my Microtech with some Paracord Category: Accessories
MicroTech Tachyon 2 Butterfly Knife
A small microtube rack with room for 8 tubes in 3 staggered rows. But the design is tileable such that multiple copies of the rack snap together to make a larger rack for as many tubes as you like. And for every added rack, you get one…
0.2/0.4 no supports.
this is a flying microtonal banana ukulele it is working you need a 6 mm rod in the neck Category: Music
Included is some gcode used to print, 2 STLs one with & one without the signature & a step file as well. Recommeded settings are: 0.2mm layer height Print with supports - organic on the baseplate Print using PETG Use 50% infill, honeycomb…
A truly minimal fret slotting mitre (miter) box. It's designed for making additional slots in already fretted instruments: ideal if you're too much into Angine de Poitrine, KGLW, Massive Audio Nerve and other microtonal stuff and want to…
Based on simple adapters, I designed a holder for my microtip spring clamps - you see the ‘microtip 60’ of Wolfcraft in the photos. However, any spring clamp with similar dimensions should fit…please let me know about fitting models so…
200μl microtubes and strips stand. A useful tool for photographing colourimetric LAMP results. This model is composed of three parts. The stand itself, a strip for the 200μl tubes, and a budget light diffuser. To utilize the light…
Rotary microtubes rack. 2 Models 3 discs - outer: 1.5/2 mL tubes, middle: 1.5/2 mL tubes, inner: 0.6 mL 2 discs - outer: 1.5/2 mL tubes, inner: 0.6 mL/0.2 mL/PCR strips Print in place No supports needed Brim is recommended for Labware…
Changed the BLtouch mount to use a BTT Microtouch. Made improvements to the hot end adapter.
The original model was 10cm, I made it 16cm. Prints very easily and you can duplicate the STL on the buildplate to make several at once. I used PLA+ 0.4mm nozzle 0,2mm layers with no adhesion or support, 20% lines infill and standard 3…
hice este modelo para soportar microtubo de 6mm en mi invernadero, pero puede usarse para soporte de cables a paredes, maderas,etc . El agujero tiene 9mm y hoyos de los tornillos están hechos para tornillos de 3,5mm.
Potentiometer knob for a Broan Microtek III hood vent. These are not reproductions of the original as mine had no knobs, but they fit nicely on mine.
For 30 tubes, holes designed with a diameter of 11mm. The spacing between the holes is 21mm. This fits 1.5ml or 2ml eppendorf tubes. Suitable for storing and transporting samples. Rack insert dimension: x=122.6mm ; y=104mm
Basic Microtech talons logo I threw together. Prints with standard profiles. Adjust size and settings to your likings.
Spare part for garden scissors broken up lock - Fiskars Snip microtip p/n 1062349 Print Settings Printer: BIQU BX Rafts: No **Supports:** No Resolution: 0.2 **Filament:** 3DKAIGE PETG white Category: Outdoor & Garden
Support for Microtouch trimmer. The STL is good. Don't refer to the picture from Thingiverse. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 0.2 Infill: 10% girou00efd Filament: basic PLA silk…
Print from PETG with minimum 3 walls and 20% Gyroid infill.
For 15 pipes, holes designed with a diameter of 11mm. The spacing between the holes is 22mm. This fits 1.5ml or 2ml eppendorf tubes. Suitable for storing and transporting samples. v1 is without stops, v2 is with stops.
TPU printed lens covers for the Aimpoint MicroT1. 25% infil
A compact bed probe inspired by the TinyTouch NMPG. https://github.com/c-/microTouch Category: 3D Printer Accessories
Don't lose the proprietary trilobe/triwing/triangle bit set that comes with your microtech.
I made this model because my printer had issues to print low-tolerance moving parts in place (they would always meld together). With this model I figured out that most of my issue was an elephant foot, which was easily solved with going…
A lid for microtubes for PBI barocyclers. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 10 Infill: 100 Filament: eSun PLA Category: Biology
MOLLE loop/web with Microtech Knives logo reproduction for your gear! I wanted some Molle Loop Flair so I mixed a few models and came up with this! My Meta Quest 3 backpack needed an upgrade! So I sliced it for my U1 with some color, see…
This is a modular, 3D‑printable plate holder for shaker incubators that use a standard 1” (2.54 cm) hole grid mounting pattern. The design was tested on the Innova 44, which uses this grid. 1) Select a model set 2x1 set: holds 2 plates…
200μl microtubes and strips stand. A useful tool for photographing colourimetric LAMP results. This model is composed of three parts. The stand itself, a strip for the 200μl tubes, and a budget light diffuser. To utilize the light…
Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.
