Liczymy pasujące modele…
After I watched the movie, I have to make something inspried by it. All model is printed and tested by myself, enjoy~ I'm a HONG KONG MAKER, Thanks, Enjoy! Visit my profile for more models and welcome to follow my social media account as…
BTT Mini12864 Display Case for Voron 2.4 and Trident 2020 T slot rail. I didn't like the default folding design, as over time it tends to get loose. This holds the display firmly, at a 20 degree angle. To use this case on your Voron, you…
This accesories inlude the helmet , a sword and a shield, The shield handle may be hard to make fit first design I ever make so It may fai in some places
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation. Since I dont have…
MKS MINI12864-V3 case 材料清单 3个M3*8或M3*6螺丝（四个螺丝孔位，其中一个不安装） 2个M4*8螺丝 2个M4 T型螺母 Bill of materials 3 units M3*8 or M3*6 screws (four screw holes, one of which is not installed) 2 units M4*8 screws 2 units M4 T nuts MKS GEN-L V2.1 & Lerdge MOS…
The Armat M41A Pulse Rifle is a pulse-action assault rifle chambered for 10×24mm Caseless ammunition. It was notably employed by the United States Colonial Marine Corps and the United States Army as their primary infantry weapon during…
recommended you print in petg! if you want to support me you can check out my makerworld account and follow me there and or boost some of my models! ( check in desc of my account for link)
I'm not a fan of the TFT screens that ship with the Artillery printers, so I decided to replace them with slick little mini12864 displays from FYSETC and BTT (FYSETC v2.1, BTT v1.0). These displays give you a control knob which I really…
Hier sind ein Paar Köpfe der Familie Simpson für die 13er Familie von Soozafone. Ich habe auch die kompletten Skins für die hier aufgeführten Charaktere für Mini 13 zum herunterladen bei meinen anderen Entwürfen. Hinweis zum Zusammenbau:…
Ich habe mich schon lange gewundert, warum es keinen Homer Simpson Skin für Soozafones Mini 13 gibt. Da ich aber schon von Kindesbeinen an Simpsonsfan bin, musste ich selber tätig werden. Das in den Bildern dargestellte Ergebnis ist auf…
Voron 2.4 Trident mini12864 NeoMount i want a stable, sturdier LCD Mount for my Voron 2.4 and Trident there are 2 version, V1 is a bit lower LCD and V1.2 the LCD sit a bit higher and easier to mount using long hex screwdriver since there…
BTT or MKS mini12864 LCD display holder with ZeroG logo Prints without supports Category: 3D Printer Accessories
A Bolt Pistol is a smaller version of the Bolter in standard use by the Space Marines. Now wieldable by the 13 Series. Remixed from Lance Greene's Boltgun model. Print upside down with supports
Just simple tennis racket in scale, for joint figures. Should be printed with 0.2mm nozzle! Have fun!
This is an enclosure for the Makerbase MKS MINI12864 V3 - With the forward-facing SD card slot. Designed to be used on a Prusa Bear - but should work on any machine with 2040 or 4040 extrusion to mount. This is intended to hang off the…
I loved the design of the case made by "derebbe" but it did not fit my Mks LCD12864 version 3 screen.. Also, I wanted to mount onto a flat plastic panel on the dreammaker overlord I am trying to rebuild, and I did not like the fact that…
Inspired by the design of DonWhitaker I created this sun shade. My goal was to make it fitting more secure on the controller, easier to print and fit into the bag that comes with the fly more combo. Depending on the accuracy of your…
Nachdem ich den Homer Simpson ( https://www.printables.com/de/model/832855-mini-13-homer-simpson-skin ) Skin für Soozafones Mini 13 gemacht hatte, wurde ich von Freunden gefragt ob ich nicht noch weitere Simpsons Skins für Mini 13 machen…
Small and Thin case for mini 12864 display. There's a couple of Mini 12864 display cases around, but I couldn't find a minimalistic one that would fit well on a small printer. The case is generic and can be used on any frame. I've…
BIGTREETECH Mini12864 V2.0 mount for Voron2.4 / Voron Trident
Screen case for a version of Makerbase MKS mini12864 v3 LCD screen with front-loading SD card slot. Use mounting brackets remix parent model by @Voxel3D_Nederland.
Minimalistic case for the MKS Mini12864 V3 but should work with other compatible models. MKS Mini12864 V3 FYSETC_MINI_12864_2_1 Fysetc Mini 12864 V2.1 BigTreeTech Mini 12864 Inspired by Matt Wilde's design, but changed for V3 and created…
Ein weiterer Simpsons Skin für Mini13. Die Augen und die Füße müssen mit etwas Druck in die dafür Vorgesehenen Stellen gepresst werden oder ggf. etwas feilen, damit sie passen. Bei dem Modell auf den Bildern ist alles gesteckt und nichts…
This is a remixed fingerboard with the “ MINI 13 Printable Jointed Figure ”'s feet attached to it so you can put your own MINI 13 on there. Now you can ride around on rails, ramps and more! Orientation is optimised for printing, print…
I have downloaded various other versions of this model and some things were wrong namely the size and height of the pot and the length of the reset button. This model has those corrected so cases can be made to fit this model more…
This Modell has 2 Parts. The opaque outer Body The transparent inner Body The inner Body i printed with clear PETG. The outer Body is your choice. I printed it in ASA. Before you start printing check your Tolenrances. The Parts have some…
Модель боевого робота для фигурок Mini13 и подобных
This is an adapted version of JATMN's “MKS MINI12864 V3 (Front Style) Enclosure” for use on the Anet A8 Plus. After scouring the 3D model sites looking for a decent display enclosure/mount for attaching the Makerbase mini12864 V3 neopixel…
Modified from MKS Mini 12864 V3 for fitting with Sovol SV02
Replaced the mainboard with a different one and used the Mini12864 display for the project. There are two versions of the display. The Fysetc one has a longer reset button, and this one is designed for that one. If you use the BTT version…
Modified the enclosure for installing in Sovol SV02 to replace the original screen.
what you need; m3x10 mm (6) 2 m3 hammer nuts and 4 m3 nuts use 3 perimeters and %25 infill. print with petg. it doesnt flex much and it s pretty solid tbh. i designed specially for bear upgrade so it doesnt collide with y belt tensioner.
Remixed from mc2_project3d's great model. Adjusted to fit the mini12864 or Ender 3, Pro, etc. by slightly enlarging and reinforcing the hole for the encoder and extending the sides to cover the longer encoder shaft. If the fit is too…
I really liked whoppingpochards mount for this display. Unfortunatly, the makerbase mini12864 V3 has a different pcb where the "beeper?" is in the way and can't get through the hole where the old display is without desoldering the beeper,…
I just went into tinkercad and added dummy13 wings and removed dummy13 torso and placed onto mini13 torso then made tail
Adapted V0.2 display mounts to hold the Switchwire Mini12864 Screen Use: 4x Standard Voron Heart Insert + 4x M3x6 to mount the screen case to the mounts. 4x M3x16 to assemble screen and front to the screen case.
Made using 3d builder and Blender. Based on the prototypes publicized in media. Edit: added a suppressed version
This is a simple 3 part container for my mini13 Helldiver so they dont get lost
I think you need supports
Building an Enderwire, I have found out that the screen cover wasn't quite suitable for the MKS mini12864 v3 I own. It has different PCB dimensions, a beeper on the back and slightly different components layout versus the BTT (?)…
Its just a pice of chees for mini 13
Simple ball joint structure and once completed should look like the one from the game
so its a uhhhh the same as V1 but inside there is a curve so the uhhh ball joint can move around inside so uhhhhhh tell uhhh me uhhh what you uhhhhh think:)
I upgraded from the Duet 2 Maestro to the Duet 3 Mini 5+, and unfortunately the generic LCD screen that came with the Maestro is no longer supported! Bummer. So, I had to upgrade to the Fysetc unit instead. As many mounts as there are for…
Screen housing for installation Fysetc Mini12864 at 45 degrees Edit it online: https://www.tinkercad.com/things/hg4VOKKyOok Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20…
This model was just a personal thing I did that I released for fun. These are parts for the mini 13 thing by soozafone to turn it into a pippins from deltarune. the Poncho is Not included obviously make that yourself bud. Also original…
modified BTT MINI12864 v1.0 display holders for profile 3030, mounting on M4x12 from https://www.thingiverse.com/thing:4896761 Print Settings Printer: REBEL II Rafts: No Supports: No Resolution: 100 Infill: 25 Filament: Gembird ABS White…
Just simple box to hold display and attach to metal part of printer.
The BTT Mini12864 V2.0 supports an FPC display cable that is required if you are using a Manta M8P V2.0 control board. Unfortunately, the original Voron 2.4R2 brackets for the Mini12864 only supports the EXP1 and EXP2 cables and there is…
This is a remix of the STM32 Mini12864 adapter cover by Voron Design to fit the boards sold by FYSETC with pre-soldered SWD headers. The STM32-Mini12864 module is used to replace the EXP1 and EXP2 ribbon cables with a USB Micro connector,…
просто "шапки" / “маски” подходящие под модель mini13, из серии Lucky13. размер на 150% выставлен по умолчанию. (100% = 150 от головы мини 13 оригинала ). просто захотелось поделиться мелкой самоделкой по фану. позможно позже загружу и…
1. 1set 6mm Round Metal Shaft WX110(010) 1K5 ohm Rotary Carbon Film Precision Single Turn Wound Potentiometer With Switch…
Mini12864 mounting brackets for the Voron V0.2, included are altered skirts for the mounts and display. Uploaded are the step and f3d files as well. The following hardware is required: 4x M2x10 Self Tapping screws, and reusing the 2x M3x6…
Remixed a few great models to mount BTT MINI12864 on Ender NG v1.2 and FLASH SKIRTS. I used four M3x5x5 heat inserts in the case (case is in my other remix, I don't know why but I cannot add here this file due to license problems although…
cassetto accessori_A1 mini1plate
Simple ball joint structure and once completed should look like the one from the game
This is a simple 3 part container for my mini13 Helldiver so they dont get lost
Its the tinkercad battle axe made dummy 13 compatible.
Its the tinkercad battle axe made dummy 13 compatible.
After searching around for a bit I did not find a model for the mellows Fly Mini 12864 display. It works just like the BTT one but the scroll knob and plugs are moved slightly. This skirt has a holder for the screen. I recommend to bolt…
![[WIP] Skateboard Feet for Mini13 Jointed Figure](https://media.printables.com/media/prints/1159869/images/8752901_3c721bdb-acaf-4f79-88c3-d27d4d284780_66326204-39b6-42c4-b206-0c263737175f/screenshot-2025-01-23-195040.png)
![mini13 leg brace V2 [NOT TESTED]](https://media.printables.com/media/prints/766325/images/5967179_1989a135-5f22-421b-86f1-53e5571efb20_2d63ed7e-f2a7-4da2-b36e-fcb7339f41d2/screenshot-2024-02-15-123141-pm.png)
![Holder BTT mini12864 v1.0 [profile 3030]](https://media.printables.com/media/prints/204659/images/1881940_35f260ec-cabc-4e99-b59f-042b3fc6e483/large_display_snc3admek_obrazovky_2021-07-09_0953.jpg)
