Liczymy pasujące modele…
Update 26.05.2024: Added version for 4-color multicolor print (AMS & MMU). Summary This is a model of a Mitsubishi Evo 4 (Lancer Evolution IV) in a kit / gift card style. Some characteristic details can be discovered. Equipped with…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Mitsubishi car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Summary This is a model of a Mitsubishi 3000GT / GTO VR4 (Z16A / Gen 1) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts and spoiler ;-) After printing, the model can be assembled with…
Summary This is a model of a Mitsubishi Mirage Cyborg ZR (Colt CJ0 / Mirage MK5) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate exhaust :) After printing, the model can be assembled with…
A friend of mine has a Mitsubishi Lancer and he had these covers stolen/broken. And of course, ordering online would have been way too expensive. Fortunately he had one left that was partially broken, but I managed to take measurements…
Voilà un logo Mitsubishi à imprimer en 3d, pour décoration Les 3 parties tiennent ensemble grâce a un rebord de 1mm tout autour du logo basique. 7cm de long, facile à imprimer
Please click ❤LIKE❤ if you appreciate my work 😊 The rally legend – now on your wall. This 3D printable model of the Mitsubishi Lancer Evolution V is a tribute to one of the most aggressive and iconic 90s performance cars. Wide fenders, a…
(German version: see below/Deutsche Version: siehe unten) A wall holder for current remote controls for Mitsubishi air condition systems. Unfortunately Mitsubishi does neither offer nor include wall holders for their remotes so I designed…
I wanted to make a simple case for the smallest ESP32C3 that I could find for use within a Mitsubishi AC. There is a CN105 port on several Mitsubishi ACs that allow you to control the unit remotely without spending $100+ on an official…
Mitsubishi Lancer X Armrest Organizer Update : a new model V15 is uploaded which is 2mm smaller for a better fitment . Fits on Lancer X Evo 09-15+ Lancer Ralliart 09-15+ Lancer Sportback 09-15+ Possible Lancer Ex Features 2 large Storages…
CZ Hlavice řadící páky pro Mitsubishi Lancer (Závit - M10x1.25) 3 různé designy - Mitsu logo, Ralliart Logo a klasické čísla. Můžete ve sliceru nastavit “Fuzzy skin” pro lepší vzhled. EN Shifter head for Mitsubishi Lancer (Thread -…
this is a detailed model of Mitsubishi Evo VIII
Mitsubishi Lancer 8. Generation (CY0) hood prop rod clip Print from Petg/ABS/ASA Support needed!
Fuel cap for your Mitsubishi Lancer EVO 7/8/9. The one without the logo is looser and may need to be sticked with double face tape. The one with the logo is tighter and doesn’t requiere to be sticked.
3D Printed Lancer Evolution Shell
Model of the Mitsubishi roof trim clips that fit most Lancer + Ralliart and EVO from 2008. I did print a douzain out of PC and Nylon with a 0.25mm nozzle and it worked like an original part. The price of the original part is outrageous.…
Description: My version of mitsubishi logo keychain, it looks kinda good. Printing: I recommend to print this with 0,1 layer and two colors of course. For the best result be sure to use ironing. Have a nice day :)
This is a 3D-printed model of the iconic Mitsubishi logo, designed with precision to capture the brand's distinctive triple-diamond emblem. Ideal for automotive enthusiasts, display pieces. print on 0.08 layer height no supports needed…
The air vent in the front bumper is blocked off from factory. I created an air duct for air intake, brake cooling or anything else. It has a mount for 3" pipe. Update 25.7.2022: I have uploaded a slightly modified version.
6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
UPDATED real size and sliced parts Dimention is real scale. I printed. i will wrap with carbon fiber All measurements are prepared with the real model. You can combine ready for printing. Wing Cap Added !!! 0.2 - 0.32 mm layer height PLA…
can be printed together the model needs to be glued together or separately in other colours the Mitsubishi G4M1 is very realistic Print in place kit card , Assembly required need to use a support
This model recreates the iconic Mitsubishi Lancer Evolution VI as a high-detail exterior-only shell — ideal for 3D printing, display projects, or RC car body swaps. Designed with accuracy in mind, it captures all the distinctive Evo 6…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
roof rail caps that cover the gaps where you attach a roof rail.
A Mitsubishi L200 2009 model car that you can print along with the tires. The tires were one of my ideas to add to this model car where it can rotate, and front wheels will be able to swivel that linked to the other side. Use filament,…
Mitsubishi Carisma internal door handle replacement based on 2001 model. Its designed for left side doors. For opposite ones just mirror the part. It has additional 4 holes for screws, instead of default extruded material pins. It is best…
Replacement Mitsubishi Pajero Center Console Armrest latch
Simple keychain with the mitsubishi logo. I used the PLA material and I used also ironing on the top layers for a nicer surface.
This is a model of Mitsubishi L200 2009 pickup truck model that I modeled to be 3d printed. Sorry there are no tires modeled for this particular 3d file, the client ghosted me after its completion, hence I somewhat abandoned this. If I…
Simple yet functional holder for Mitsubishi AC Remote. Double-side tape is required for mounting.
My personal favorite car, the Mitsubishi GTO was the underdog sport-coupe of the 90s japanese car scene. With Honda, Mazda, Nissan, and Toyota all releasing their flagship sportscars, Mitsubishi needed to stick their foot into the door…
Mitsubishi Lancer Evolution VI, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm…
Výplň možno změnit v PrusaSlicer The fill can be changed in PrusaSlicer Print instructions Vrstva 0.2 Výplň 15% PLA
Spacer-adapter for 165 mm speaker in the standard place of front and rear Mitsubishi Pajero 3. Category: Automotive
The original part (white, right side) broke off, so I made a new one (left side, gray). Printed in PETG. Supports (from build plate only) are required to print this item.
This Mitsubishi keychain features the iconic brand logo, proudly showcasing your passion for quality and style.
The standard cup holders in the Mitsubishi PB/PC Challenger are too small for many applications. I made this to fit an insulated coffee mug but it also fits many drink containers.
The plastic part pushing side windows to the rubber seals. As the car gets older day by day, these braces often break which results in the window not sealing perfectly. Mitsubishi PN: MB926277 - HOOK,FR DOOR WINDOW GLASS STABILIZER I…
Celebrate the spirit of rally racing with this 3D printable STL model of the Mitsubishi Lancer Evolution IV. This rally legend model is perfect for motorsport enthusiasts and JDM fans looking to display a legendary performance car with…
This is a rough 3d model of interior screw cover for Mitsubishi Pajero/Montero Sport Gen 2 Notes: Mirror the 3d model for the passenger side Use ASA or ABS 100% infil I recommend 0.12 Layer Height
Ich habe hier verschiedene Mitsubishi Schlüsselanhänger designed. Diese können in verschiednen Farbvariationen gedruckt werden. Beste Ergebnisse werden mit einer 0,2mm Nozzel erzielt.
This is a replacement wiper arm pivot cover for the first gen Mitsubishi Montero/Pajero, and Dodge Raider. Made to be a replacement for Mitsubishi p/n MB623853.
This is a RALLI//ART keychain. Letters and stripes are offset in layer height so it is possible to set the colour to match the original logo. I got the best result if the keychain is enlarged to 150%.
A storage for the useless tray in the top of the 2022 Mitsubish Triton. Includes a spot for fuel/credit card, pens, chapstick, and general storage. There are two options with different sized pen storage areas. Update 18/08/24: added…
Stereo brackets for mounting single or double din head units in the 1991-1999 3000GT/GTO. Designed to be printed flat with no supports. Supports will make your holes a bit more clean. Suggest you print these with a higher temp material as…
I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…
Este es el escaneo de un soporte original que tenía guardado para el Mitsubishi Eclipse de segunda generación, para poder ponerle 3 relojes en la zona del pilar A izquierdo.
These knobs fall apart after a few years due to poor plastic. It is very hard to find so i had to make it from scratch. This needs to be printed with PETG transparent and its good as new. There is a small hole on top of the knob. I have…
Mitsubishi Pajero TR4, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
The little piece that make move the Rear Shelf of a Mitsubishi Colt car. Not as good as the original one but do the job. Printed without supports but with a brim.
Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.
this is an adapter to replace the one in slot A to hold a different pen, this is for a 10mm wide body pen. notably the Mitsubishi uni-pine fine line pens since this will hold them at the correct height. to take the current pen holder out,…
Exact replica of the Mitsubishi Motors Logo. The inner parts are seperate from the outer layer, so you can easily change colors. The inner figures are loose objects and don't stick together. It's a snug fit, so you don't need any glue.…
Beautiful and very easy to print. A unique Mitsubishi key ring
A wall mount for Mitsubishi's air conditioning unit's remote controller (type SG16L). It's a snug fit. Will probably fit other remotes as well. Mounts with two 3mm countersunk wood screws. Print Settings Printer Brand: Wanhao Printer:…
Top and bottom bins to fit into the center console of the Mitsubishu Outlander PHEV model. I printed the top bin upside down with a lot of support for the bottom, which gives a rough inner bottom surface which is fine to avoid parts…
Switch plate to mount a push button in a spare slot on the dash. This is for a 2020 Mitsubishi Outlander PHEV. I would imagine it would be fine for most Outlander models and maybe other Mitsubishi cars. I use this push button on mine to…
Mitsubishi Keycap printed with White and Red
My old key fob fell apart so I modeled a new case around the PCB. It is even slightly thinner then the original. Works for 2002-2006 Mitsubishi Eclipse 2002-2007 Mitsubishi Lancer 2004 Mitsubishi Montero Sport 2003-2006 Mitsubishi…
Tested on Mitsubishi Lancer Evo 5, will also fit 4 & 6, aswell as other non Evo Lancer/Colt models. -Arm Rest Catch (MB869854) -Arm Rest Stopper (MB898395) -Arm Rest Stopper Pivot Bracket (MB869855) Best printed in ABS/Petg or another…
No Supports Required Print Time: Approx 10 Min Printer Used: Ender 3 v2 with a 0.6 mm Nozzle Printer Settings 0.3 mm Layer Hight 2 Walls Speed 80 mm/s
simple remote Control holder for the Ikea Skadis wall perferct fit for the Mitsubishi remote.
This is holder for remote controller of Mitsubishi AC.
Print upside down laying on the roof without supports.
Can printed in 2 colours as you like.
So the plastic of all 3 keys of my family's Mitsubishi Space Star has deteriorated due to old age. I can't really fault it after 20 years though. :) I tried to shop around for a new shell or a sleeve but couldn't find any for the “stupid”…
Mitsubishi Colt wheel hub cap
Girlfriend needed a new key fob holder since the ring broke on hers. After losing her key the 7th time, I printed a little case for it with a key ring. She's had it for about a month and it's worked out great for her so far. I have two…
My knob bezel cracked so I thought I may as well design and print a new one. I used snug supports which seemed to work the best. I also recommend using ironing on all top layers for a smother finish. There are 2 models, Outlander4WD is…
Glovebox hinge for a 2001 Mitsubishi Galant. It may fit other Mitsubishi models. Print with hook side face down, 100% infill and support on for best results. Holes may need to have a drill run through them for the best fit. Print Settings…
Nachbau eines Original Mitsubishi Emblem für den Grill. OEM Nr. MB607496 viel Spaß beim Drucken
Mitsubishi VR-4 Keychain Print instructions Material: PLA Layer height: 0.1mm Infill: 100%
3000GT Spoiler Lip Wing You can slice with 3D printer Slicer. Print Settings Rafts: Yes Category: Automotive
This camera mount keeps the aftermarket camera centred and out of the way of the number plate.
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
Great way to prevent the remote from going missing; mount it high up the wall so your kids (or other animals) can't reach it! I uploaded two versions of the holder. Vase mode version needs minor touch-up after printing, just cut the screw…
This is a replacement center console / armrest catch for the Mitsubishi Lancer 2014 . Latch broke on mine and decided to model up a replacement. May fit other models/years - compare to your damaged part if in doubt. Print Settings Setting…
Replacement Switch Plate cover. Designed to fit Gen 3 Mitsubishi Montero (2003-2006), but will likely fit other models. There's a blank version and a version with room for a toggle switch in case you'd like to add one. I've only tested…
I recently had a paint correction and a ceramic coat done on my evo 9 and i took the chance to make a copy of the evolution IX logo for future use
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
Height is 2.6mm, in my opinion looks the best when placed on wall. You can make it larger or smaller, but I assume 2mm is the lowest you can go in height. Prints flat on a 256x256x256mm plate. I oriented it diagonally on the plate to make…
silhouette Mitsubishi 3000GT VR-4 + Logos los cuales componen de unas medidas de 51cm x 13cm x 3cm del coche, 5 x 4.2 x 2.5 el logotipo de Mitsubishi y de 15 x 4 x 2.5 el de 3000GT Para imprimir el coche es necesario cortarlo a la medida…
Mitsubishi 3000GT keychain Also works for Mitsubishi GTO, Dodge Stealth
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
When I bought my car it didn't come with one of the anchors in the trunk, so I modelled it from the other ones and printed using PETG Might be compatible with different cars aswell Mitsubishi PN: MR149057
This is mitsubishi carisma tire rim logo. I printed it with TPU. This is elastic to fit center circle. You MUST SCALE red logo to fit black one.
My Lancer Evolution was missing the GSR badge. From pictures available online I recreated this model as close as I was able to get without having access to the original badge. I tried having it printed on a multicolor MJF printer, but…
Заглушка крепления поводка передних дворников Mitsubishi Outlander 3 (рест.3). При чистке снега отвалилась. Хорошо, что углядел в снегу. Т.к. вероятность ее потерять имеет место быть, то по-быстрому ее замоделил, распечатал, примерил -…
A cool design inspired by a Mitsubishi and Lynx Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2~0.1 Infill: Doesn't Matter Category: Keychains
Layer Height 0.12mm Ironing All Top Layer Filament Colors:White,Black,Red
